Re: various laptop nagles - any suggestions? (note:2.6.19-rc2-mm1 but applies to multiple kernels)

From: Andrew Morton
Date: Thu Oct 19 2006 - 22:42:33 EST


On Thu, 19 Oct 2006 09:05:49 -0700
teunis <teunis@xxxxxxxxxxxxxxx> wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Setting the internal clock to 100 Hz stablizes the laptop - and the
> synaptics touchpad stops "crashing" (when "crashed" the pad reads out
> all kinds of seemingly random values). I would suspect the driver
> needs adjusting for the variable clock. Also - it's definitely nicer
> on the laptop power use as far as I can tell - should this be in the
> documentation?

So you're saying that CONFIG_NO_HZ breaks the touchpad?

> I'm very grateful that compact flash-based booting on a SATA system
> works well. It hasn't been so reliable in 2.6.19-rc2-mm1 for IDE/CF
> adaptors but I haven't yet solved why. (tested with various laptops)

hm. What goes wrong?

> resume from "suspend to ram" (ACPI S3 mode) - the keyboard and mouse do
> not recover on 945G chipset. Note that otherwise the chipset works
> well in 2.6.19-rc2-mm1 - and this is the first kernel that does work well).

So this might not be a new bug?

> LVM2 - when adding and removing physical volumes (again, on Compact
> Flash cards via USB and Firewire adaptors) - it doesn't always remove
> the volume properly (pvremove /dev/sda or equiv) from the device-mapper.
> This leaves me unable to plug in another. I suspect this to be an
> LVM2 problem (no hotplug?) rather than a compact flash or SCSI problem.

Can you identify an earlier kernel in which this worked OK?

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/