Re: [PATCH 1/7] KVM: userspace interface

[Alan Cox]

Ar Iau, 2006-10-19 am 14:31 -0500, ysgrifennodd Anthony Liguori:
> > My plan was to allow userspace to register certain mmio addresses for 
> > cacheing, so that if the guest code had a code sequence like

Thats actually not ideal having played with this for something else. The
best results I got with real world hardware was supporting registration
of sequences and address/mask pairs. You can also pre-load answers to
avoid trapping back out to user apps. Obviously emulating virtualized
hardware with proper guest OS drivers is far better still.

What I had in the end looked something like this

Groups of addresses in a table. Each table has state bits. Each access
can be conditional on a mask of statebits being 1/0. Each access can
also either trap or not

Within each access the rule was matched by address and width then by
masks

Firstly if the bits matching a transition mask changed to the transition
state bits then we trapped

	ie   if ((new_value & transition_mask) == transition_bits)

so you can avoid trapping out on stuff that doesn't "fire" an event - eg
the head select on IDE.

Then the I/O was merged with a mask of fixed bits (for read only bits
without trapping in emulation) which occur a lot, and stored in an array
slot number given by the rule (with overlaps for .b/.w allowed). Finally
the statebits were updated by the rule again using a mask and bits.

Similar rules applied to reads so that values that didn't need traps
could be handled directly. Repeating I/O had a special case (thats
"hack") rule type for saying eg "512 bytes" then trap.

A trap was also allowed to load back a prediction sequence. That allowed
the user space side to "guess" the usual behaviour of the driver stuff
being emulated so if it got a given event it could feed a sequence of
address/size/value back [never did make these conditional to be
cleverer]

This means you can do stuff like IDE by trapping mostly on the final
'kick' of a command, and if its a read the predict then 512 byte insw()
from the driver and the next 5 or 6 port read accesses for each I/O.

The state stuff is very compact as its basically

	while (rule) {
		if (bitcompare(table->state, rule->state)) {
			rule = rule->next;
			continue;
		}
		if (bitcompare(rule->transition, value) == 0)
			return TRAP;
		value &= rule->value[0];
		value |= rule->value[1];
		table->state &= rule->newstate[0];
		table->state |= rule->newstate[1];
		table->cache[rule->cache] = value;
		rule = rule->next;
	} 

and for read on a given table just a case of

	if (predictor == NULL || port != predictor->port || size !=
predictor->size)
		TRAP();
	else {
		value = table->cache[predictor->cache];
		predictor = predictor->next;
	}

Alan

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/