Re: BUG: warning at kernel/softirq.c:141/local_bh_enable()

[Eric Dumazet]

John Philips a écrit :
> > Hum, given your slow cpu, you might revert tx queue
> > length to 2.4.XX level 
> > (100 instead of 1000)
>
> I tried that, it didn't help any.
>
> > Are you sure you cannot post here : 
> >
> > tc -s -d qdisc show dev eth6
>
> As I said, there are rules in place for every single
> IP in a /22 subnet.  It would be over 12000 lines.  I
> tried turning off the traffic shaping, it didn't help.
>  
> > You might want to make inet_peer_cache purge faster
> > :
> >
> > echo 1 >/proc/sys/net/ipv4/inet_peer_gc_mintime
> > echo 2 >/proc/sys/net/ipv4/inet_peer_gc_maxtime
>
> I tried that as well, unfortunately it didn't help.

This was just to reduce size of the table (and time of the lookups), not to 
solve the nic problem at all :)

> It's worth noting that this behavior happens at
> seemingly random times for random amounts of time.  It
> also causes the interface to auto-negotiate it's
> settings again.  During these periods, ping times to a
> switch plugged directly into eth6 are 4000+ms.  When I
> statically set the interface to 100baseT/full duplex
> with mii-tool, ping times to the switch immediately
> return to normal.  Unfortunately this fix only lasts a
> few minutes, because the interface hangs up and
> returns to auto-negotiation.
>
> Also, I know this isn't a problem with my hardware
> since it started happening immediately after I
> upgraded the kernel from 2.4.25.

Yes, I supposed that your hardware was running OK with previous kernels.

Which NIC driver is handling eth6 ?

-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html