Re: [Alsa-user] PCM distorsion snapshots from SATA/ALSA conflict

[Dominique Dumont]

Lee Revell <rlrevell@xxxxxxxxxxx> writes:

> (it's probably a bad idea to attach .jpgs to a LKML post - please post
> them on the web and send a URL)

(ok. But is there a site that will guarantee the availability of the
jpg attachments when people are searching the lklm or alsa archives ?
)

> You seem to be using a period size of 256 samples - any change if you
> use a larger period size?

Unless I'm wrong, you want me to test the PCM output while modifying
the --period option of speaker-test.

So I've tested this command:
  speaker-test -D iec958 -c 2 -f 1000 -p 4096 -t sine -s 2

No change: I still have a lot of spikes in the sine wave.

> Any change if you use setpci to increase LATENCY_TIMER for the SBLive!
> card?

To be sure I've done the correct tests, here are the commands are used:

$ lspci
[...]
01:07.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
01:07.1 Input device controller: Creative Labs SB Live! Game Port (rev 0a)
[...]
01:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02)

$ sudo setpci -s 01:07.0 latency_timer=80
$ sudo setpci -s 01:07.0 latency_timer=f8
$ sudo setpci -s 01:0b.0 latency_timer=10

No change at all :-(

Cheers

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/