[patch 2/2] round_jiffies users
From: Arjan van de Ven
Date: Tue Oct 10 2006 - 12:07:04 EST
From: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
Subject: round_jiffies users
CC: jgarzik@xxxxxxxxx
CC: netdev@xxxxxxxxxxxxxxx
This patch introduces users of the round_jiffies() function.
These timers all were of the "about once a second" or "about once every X seconds"
variety and several showed up in the "what wakes the cpu up" profiles that
the tickless patches provide.
Signed-off-by: Arjan van de Ven <arjan@xxxxxxxxxxxxxxx>
Index: linux-2.6.19-rc1-git6/mm/slab.c
===================================================================
--- linux-2.6.19-rc1-git6.orig/mm/slab.c
+++ linux-2.6.19-rc1-git6/mm/slab.c
@@ -926,7 +926,7 @@ static void __devinit start_cpu_timer(in
if (keventd_up() && reap_work->func == NULL) {
init_reap_node(cpu);
INIT_WORK(reap_work, cache_reap, NULL);
- schedule_delayed_work_on(cpu, reap_work, HZ + 3 * cpu);
+ schedule_delayed_work_on(cpu, reap_work, __round_jiffies_relative(HZ, cpu));
}
}
@@ -3821,7 +3821,7 @@ static void cache_reap(void *unused)
if (!mutex_trylock(&cache_chain_mutex)) {
/* Give up. Setup the next iteration. */
schedule_delayed_work(&__get_cpu_var(reap_work),
- REAPTIMEOUT_CPUC);
+ round_jiffies_relative(REAPTIMEOUT_CPUC));
return;
}
@@ -3867,7 +3867,8 @@ next:
next_reap_node();
refresh_cpu_vm_stats(smp_processor_id());
/* Set up the next iteration */
- schedule_delayed_work(&__get_cpu_var(reap_work), REAPTIMEOUT_CPUC);
+ schedule_delayed_work(&__get_cpu_var(reap_work),
+ round_jiffies_relative(REAPTIMEOUT_CPUC));
}
#ifdef CONFIG_PROC_FS
Index: linux-2.6.19-rc1-git6/fs/jbd/transaction.c
===================================================================
--- linux-2.6.19-rc1-git6.orig/fs/jbd/transaction.c
+++ linux-2.6.19-rc1-git6/fs/jbd/transaction.c
@@ -53,7 +53,7 @@ get_transaction(journal_t *journal, tran
spin_lock_init(&transaction->t_handle_lock);
/* Set up the commit timer for the new transaction. */
- journal->j_commit_timer.expires = transaction->t_expires;
+ journal->j_commit_timer.expires = round_jiffies(transaction->t_expires);
add_timer(&journal->j_commit_timer);
J_ASSERT(journal->j_running_transaction == NULL);
Index: linux-2.6.19-rc1-git6/drivers/ata/libata-scsi.c
===================================================================
--- linux-2.6.19-rc1-git6.orig/drivers/ata/libata-scsi.c
+++ linux-2.6.19-rc1-git6/drivers/ata/libata-scsi.c
@@ -3094,7 +3094,8 @@ void ata_scsi_hotplug(void *data)
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
if (ata_dev_enabled(dev) && !dev->sdev) {
- queue_delayed_work(ata_aux_wq, &ap->hotplug_task, HZ);
+ queue_delayed_work(ata_aux_wq, &ap->hotplug_task,
+ round_jiffies_relative(HZ));
break;
}
}
Index: linux-2.6.19-rc1-git6/net/core/dst.c
===================================================================
--- linux-2.6.19-rc1-git6.orig/net/core/dst.c
+++ linux-2.6.19-rc1-git6/net/core/dst.c
@@ -99,7 +99,14 @@ static void dst_run_gc(unsigned long dum
printk("dst_total: %d/%d %ld\n",
atomic_read(&dst_total), delayed, dst_gc_timer_expires);
#endif
- mod_timer(&dst_gc_timer, jiffies + dst_gc_timer_expires);
+ /* if the next desired timer is more than 4 seconds in the future
+ * then round the timer to whole seconds
+ */
+ if (dst_gc_timer_expires > 4*HZ)
+ mod_timer(&dst_gc_timer,
+ round_jiffies(jiffies + dst_gc_timer_expires));
+ else
+ mod_timer(&dst_gc_timer, jiffies + dst_gc_timer_expires);
out:
spin_unlock(&dst_lock);
Index: linux-2.6.19-rc1-git6/net/core/neighbour.c
===================================================================
--- linux-2.6.19-rc1-git6.orig/net/core/neighbour.c
+++ linux-2.6.19-rc1-git6/net/core/neighbour.c
@@ -695,7 +695,10 @@ next_elt:
if (!expire)
expire = 1;
- mod_timer(&tbl->gc_timer, now + expire);
+ if (expire>HZ)
+ mod_timer(&tbl->gc_timer, round_jiffies(now + expire));
+ else
+ mod_timer(&tbl->gc_timer, now + expire);
write_unlock(&tbl->lock);
}
Index: linux-2.6.19-rc1-git6/net/sched/sch_generic.c
===================================================================
--- linux-2.6.19-rc1-git6.orig/net/sched/sch_generic.c
+++ linux-2.6.19-rc1-git6/net/sched/sch_generic.c
@@ -209,7 +209,7 @@ static void dev_watchdog(unsigned long a
dev->name);
dev->tx_timeout(dev);
}
- if (!mod_timer(&dev->watchdog_timer, jiffies + dev->watchdog_timeo))
+ if (!mod_timer(&dev->watchdog_timer, round_jiffies(jiffies + dev->watchdog_timeo)))
dev_hold(dev);
}
}
Index: linux-2.6.19-rc1-git6/drivers/net/e1000/e1000_main.c
===================================================================
--- linux-2.6.19-rc1-git6.orig/drivers/net/e1000/e1000_main.c
+++ linux-2.6.19-rc1-git6/drivers/net/e1000/e1000_main.c
@@ -483,7 +483,7 @@ e1000_up(struct e1000_adapter *adapter)
clear_bit(__E1000_DOWN, &adapter->flags);
- mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
+ mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ));
return 0;
}
@@ -2493,7 +2493,7 @@ e1000_watchdog(unsigned long data)
netif_carrier_on(netdev);
netif_wake_queue(netdev);
- mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ);
+ mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
adapter->smartspeed = 0;
}
} else {
@@ -2503,7 +2503,7 @@ e1000_watchdog(unsigned long data)
DPRINTK(LINK, INFO, "NIC Link is Down\n");
netif_carrier_off(netdev);
netif_stop_queue(netdev);
- mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ);
+ mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
/* 80003ES2LAN workaround--
* For packet buffer work-around on link down event;
@@ -2568,7 +2568,7 @@ e1000_watchdog(unsigned long data)
e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
/* Reset the timer */
- mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
+ mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ));
}
#define E1000_TX_FLAGS_CSUM 0x00000001
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/