[2.6.19 patch] drivers/char/specialix.c: fix the baud conversion

[Adrian Bunk]

On Mon, Oct 09, 2006 at 08:37:45AM +0200, Rogier Wolff wrote:
> On Mon, Oct 09, 2006 at 12:18:19AM +0200, Adrian Bunk wrote:
> > +       if (baud == 38400) {
> >                 if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
> >                         baud ++;
> >                 if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
> >                         baud += 2;
> >         }
> > 
> > Increasing the index for baud_table[] by 1 or 2 is quite different from 
> > increasing baud by 1 or 2.
> 
> In that range, 
> 	baud <<= 1; 
> and
> 	baud <<= 2; 
> 
> should work. 

Thanks for the hint.

What about the patch below?

> 	Roger. 

cu
Adrian


<--  snip  -->


This patch corrects the following bugs introduced by
commit 67cc0161ecc9ebee6eba4af6cbfdba028090b1b9:
- remove one remaining and now incorrect baud_table[] usage
- "baud +=" must become "baud <<="

The former bug was spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@xxxxxxxxx>

---

 drivers/char/specialix.c |   15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

--- linux-2.6/drivers/char/specialix.c.old	2006-10-10 08:04:48.000000000 +0200
+++ linux-2.6/drivers/char/specialix.c	2006-10-10 08:06:25.000000000 +0200
@@ -183,11 +183,6 @@
 
 static struct tty_driver *specialix_driver;
 
-static unsigned long baud_table[] =  {
-	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
-	9600, 19200, 38400, 57600, 115200, 0,
-};
-
 static struct specialix_board sx_board[SX_NBOARD] =  {
 	{ 0, SX_IOBASE1,  9, },
 	{ 0, SX_IOBASE2, 11, },
@@ -1090,9 +1085,9 @@
 
 	if (baud == 38400) {
 		if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-			baud ++;
+			baud <<= 1;
 		if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-			baud += 2;
+			baud <<= 2;
 	}
 
 	if (!baud) {
@@ -1150,11 +1145,9 @@
 	sx_out(bp, CD186x_RBPRL, tmp & 0xff);
 	sx_out(bp, CD186x_TBPRL, tmp & 0xff);
 	spin_unlock_irqrestore(&bp->lock, flags);
-	if (port->custom_divisor) {
+	if (port->custom_divisor)
 		baud = (SX_OSCFREQ + port->custom_divisor/2) / port->custom_divisor;
-		baud = ( baud + 5 ) / 10;
-	} else
-		baud = (baud_table[baud] + 5) / 10;   /* Estimated CPS */
+	baud = (baud + 5) / 10;
 
 	/* Two timer ticks seems enough to wakeup something like SLIP driver */
 	tmp = ((baud + HZ/2) / HZ) * 2 - CD186x_NFIFO;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/