Re: monitor not active after boot (was Re: Merge window closed: v2.6.19-rc1)

[Olaf Hering]

On Thu, Oct 05, Olaf Hering wrote:

> If my monitor is off during boot and I turn it on once KDE is fully
> started, the screen remains black. If it stays on during boot, X will
> work ok. This happens on a G5 with ' nVidia Corporation NV43 [GeForce 6600] (rev a2)'
> The i2c errors are new.

I dont know how Xorg gets the EDID data. There is no difference in dmesg
output with monitor on/off. But the Xorg.0.log shows:

@@ -772,49 +772,13 @@
 (II) NV(0): Probing for EDID on I2C bus B...
 (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
 (II) NV(0): I2C device "DDC:ddc2" removed.
-(--) NV(0): DDC detected a CRT:
-(II) NV(0): Manufacturer: ACT  Model: f1b  Serial#: 8016154
-(II) NV(0): Year: 1998  Week: 9
-(II) NV(0): EDID Version: 1.0
-(II) NV(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
-(II) NV(0): Sync:  Separate  Composite
-(II) NV(0): Max H-Image Size [cm]: horiz.: 28  vert.: 21
-(II) NV(0): Gamma: 2.00
-(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
-(II) NV(0): redX: 0.625 redY: 0.339   greenX: 0.301 greenY: 0.599
-(II) NV(0): blueX: 0.141 blueY: 0.065   whiteX: 0.281 whiteY: 0.310
-(II) NV(0): Supported VESA Video Modes:
-(II) NV(0): 720x400@70Hz
-(II) NV(0): 640x480@60Hz
-(II) NV(0): 640x480@75Hz
-(II) NV(0): 800x600@60Hz
-(II) NV(0): 800x600@75Hz
-(II) NV(0): 1024x768@60Hz
-(II) NV(0): 1024x768@70Hz
-(II) NV(0): 1024x768@75Hz
-(II) NV(0): Manufacturer's mask: 0
-(II) NV(0): Supported additional Video Mode:
-(II) NV(0): clock: 36.0 MHz   Image Size:  280 x 210 mm
-(II) NV(0): h_active: 640  h_sync: 696  h_sync_end 752 h_blank_end 832 h_border: 0
-(II) NV(0): v_active: 480  v_sync: 481  v_sync_end 484 v_blanking: 509 v_border: 0
-(II) NV(0): Supported additional Video Mode:
-(II) NV(0): clock: 56.2 MHz   Image Size:  280 x 210 mm
-(II) NV(0): h_active: 800  h_sync: 832  h_sync_end 896 h_blank_end 1048 h_border: 0
-(II) NV(0): v_active: 600  v_sync: 601  v_sync_end 604 v_blanking: 631 v_border: 0
-(II) NV(0): Supported additional Video Mode:
-(II) NV(0): clock: 94.5 MHz   Image Size:  280 x 210 mm
-(II) NV(0): h_active: 1024  h_sync: 1072  h_sync_end 1168 h_blank_end 1376 h_border: 0
-(II) NV(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 808 v_border: 0
-(II) NV(0): Supported additional Video Mode:
-(II) NV(0): clock: 108.0 MHz   Image Size:  280 x 210 mm
-(II) NV(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
-(II) NV(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
+(II) NV(0):   ... none found
 (--) NV(0): CRTC 0 appears to have a CRT attached
 (II) NV(0): Using CRT on CRTC 0
 (--) NV(0): VideoRAM: 262144 kBytes
 (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
-(II) NV(0): Monitor[0]: Using default hsync range of 43.26-68.68 kHz
-(II) NV(0): Monitor[0]: Using default vrefresh range of 60.01-85.06 Hz
+(II) NV(0): Monitor[0]: Using default hsync range of 28.00-33.00 kHz
+(II) NV(0): Monitor[0]: Using default vrefresh range of 43.00-72.00 Hz
 (II) NV(0): Clock range:  12.00 to 400.00 MHz
 (II) NV(0): Not using default mode "640x350" (hsync out of range)
 (II) NV(0): Not using default mode "320x175" (hsync out of range)


The root cause may be that Xorg nv can not handle 640x480@xx at all on this card,
or this monitor. It works ok in OSX.
Also turning the monitor off while in yaboot doesnt help.
tree -f /sys shows also no difference.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/