Re: [PATCH] pata_amd: Check enable bits on Nvidia

[Krzysztof Halasa]

Alan Cox <alan@xxxxxxxxxxxxxxxxxxx> writes:

> +++ linux-2.6.18-rc6-mm1/drivers/ata/pata_amd.c	2006-09-11 17:17:19.000000000 +0100
> @@ -25,7 +25,7 @@
>  #include <linux/libata.h>
>  
>  #define DRV_NAME "pata_amd"
> -#define DRV_VERSION "0.2.2"
> +#define DRV_VERSION "0.2.3"
>  
>  /**
>   *	timing_setup		-	shared timing computation and load
> @@ -253,11 +253,22 @@
>  
>  static int nv_pre_reset(struct ata_port *ap) {
>  	static const u8 bitmask[2] = {0x03, 0xC0};
> +	static const struct pci_bits nv_enable_bits[] = {
> +		{ 0x50, 1, 0x02, 0x02 },
> +		{ 0x50, 1, 0x01, 0x01 }
> +	};
>  
>  	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
>  	u8 ata66;
>  	u16 udma;
>  
> +	if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no])) {
> +		ata_port_disable(ap);
> +		printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
> +		return 0;
> +	}
> +
> +

Well, it's now a bit better :-)

ata4: port disabled. ignoring.
ata4: SRST failed (status 0xFF)
ata4: SRST failed (err_mask=0x100)
ata4: softreset failed, retrying in 5 secs
ata4: SRST failed (status 0xFF)
ata4: SRST failed (err_mask=0x100)
ata4: softreset failed, retrying in 5 secs
ata4: SRST failed (status 0xFF)
ata4: SRST failed (err_mask=0x100)
ata4: reset failed, giving up
-- 
Krzysztof Halasa
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/