Re: LibPATA/ATA Errors Continue - Will there be a fix for this?

From: Justin Piszcz
Date: Tue Jun 20 2006 - 18:21:36 EST


On Tue, 20 Jun 2006, David Greaves wrote:

Justin Piszcz wrote:
Dave, what is the make/model of the drives you get errors with by the
way?

On Tue, 20 Jun 2006, David Greaves wrote:
[Some email archaeology later]

Back in March I was running 2.6.16 (with the opcode patch) and I sent an
email with the following info:

dmesg:
ata1: translated op=0x28 cmd=0x25 ATA stat/err 0x51/04 to SCSI
SK/ASC/ASCQ 0xb/00/00
ata1: status=0x51 { DriveReady SeekComplete Error }
ata1: error=0x04 { DriveStatusError }
Model Family: Maxtor DiamondMax 10 family
Device Model: Maxtor 6B200M0
Serial Number: B4038RRH
Firmware Version: BANC1980

this is sata_sil

Another machine has :
Device Model: SAMSUNG SP2504C
Serial Number: S09QJ10Y720963
Firmware Version: VT100-33
User Capacity: 250,059,350,016 bytes

running through sata_via

that's running 2.6.16.18 and just gives:
ata1: PIO error
ata1: status=0x50 { DriveReady SeekComplete }


David

--


I also use sata_sil, perhaps it is a controller-specific problem? I use a
WD WD4000KD-00N.

I also ahve that same exact samsung drive but I have it on an Intel ICH5
controller and I do not seem to get that error.

# grep PIO\ error *
#

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/