[PATCH] typo: buad -> baud
From: Horst Schirmeier
Date: Thu Apr 13 2006 - 07:38:02 EST
Replacing mistyped "buad" with "baud" where applicable.
Signed-off-by: Horst Schirmeier <horst@xxxxxxxxxxxxxx>
---
arch/mips/ddb5xxx/ddb5476/dbg_io.c | 2 +-
arch/mips/ddb5xxx/ddb5477/kgdb_io.c | 2 +-
arch/mips/gt64120/ev64120/serialGT.c | 2 +-
arch/mips/gt64120/momenco_ocelot/dbg_io.c | 2 +-
arch/mips/ite-boards/generic/dbg_io.c | 2 +-
arch/mips/momentum/jaguar_atx/dbg_io.c | 2 +-
arch/mips/momentum/ocelot_c/dbg_io.c | 2 +-
arch/mips/momentum/ocelot_g/dbg_io.c | 2 +-
include/asm-arm/arch-l7200/serial_l7200.h | 2 +-
include/asm-arm/arch-l7200/uncompress.h | 2 +-
10 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/mips/ddb5xxx/ddb5476/dbg_io.c b/arch/mips/ddb5xxx/ddb5476/dbg_io.c
index 85e9e50..f2296a9 100644
--- a/arch/mips/ddb5xxx/ddb5476/dbg_io.c
+++ b/arch/mips/ddb5xxx/ddb5476/dbg_io.c
@@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data,
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
diff --git a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
index 1d18d59..385bbdb 100644
--- a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
+++ b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
@@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data,
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
diff --git a/arch/mips/gt64120/ev64120/serialGT.c b/arch/mips/gt64120/ev64120/serialGT.c
index 16e34a5..8f0d835 100644
--- a/arch/mips/gt64120/ev64120/serialGT.c
+++ b/arch/mips/gt64120/ev64120/serialGT.c
@@ -149,7 +149,7 @@ void serial_set(int channel, unsigned lo
#else
/*
* Note: Set baud rate, hardcoded here for rate of 115200
- * since became unsure of above "buad rate" algorithm (??).
+ * since became unsure of above "baud rate" algorithm (??).
*/
outreg(channel, LCR, 0x83);
outreg(channel, DLM, 0x00); // See note above
diff --git a/arch/mips/gt64120/momenco_ocelot/dbg_io.c b/arch/mips/gt64120/momenco_ocelot/dbg_io.c
index 8720bcc..f0a6a38 100644
--- a/arch/mips/gt64120/momenco_ocelot/dbg_io.c
+++ b/arch/mips/gt64120/momenco_ocelot/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data,
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
diff --git a/arch/mips/ite-boards/generic/dbg_io.c b/arch/mips/ite-boards/generic/dbg_io.c
index c4f8530..6a7ccaf 100644
--- a/arch/mips/ite-boards/generic/dbg_io.c
+++ b/arch/mips/ite-boards/generic/dbg_io.c
@@ -72,7 +72,7 @@ void debugInit(uint32 baud, uint8 data,
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
diff --git a/arch/mips/momentum/jaguar_atx/dbg_io.c b/arch/mips/momentum/jaguar_atx/dbg_io.c
index 542eac8..d7dea0a 100644
--- a/arch/mips/momentum/jaguar_atx/dbg_io.c
+++ b/arch/mips/momentum/jaguar_atx/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data,
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
diff --git a/arch/mips/momentum/ocelot_c/dbg_io.c b/arch/mips/momentum/ocelot_c/dbg_io.c
index 8720bcc..f0a6a38 100644
--- a/arch/mips/momentum/ocelot_c/dbg_io.c
+++ b/arch/mips/momentum/ocelot_c/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data,
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
diff --git a/arch/mips/momentum/ocelot_g/dbg_io.c b/arch/mips/momentum/ocelot_g/dbg_io.c
index 8720bcc..f0a6a38 100644
--- a/arch/mips/momentum/ocelot_g/dbg_io.c
+++ b/arch/mips/momentum/ocelot_g/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data,
/* disable interrupts */
UART16550_WRITE(OFS_INTR_ENABLE, 0);
- /* set up buad rate */
+ /* set up baud rate */
{
uint32 divisor;
diff --git a/include/asm-arm/arch-l7200/serial_l7200.h b/include/asm-arm/arch-l7200/serial_l7200.h
index 238c595..b1008a9 100644
--- a/include/asm-arm/arch-l7200/serial_l7200.h
+++ b/include/asm-arm/arch-l7200/serial_l7200.h
@@ -28,7 +28,7 @@
#define UARTDR 0x00 /* Tx/Rx data */
#define RXSTAT 0x04 /* Rx status */
#define H_UBRLCR 0x08 /* mode register high */
-#define M_UBRLCR 0x0C /* mode reg mid (MSB of buad)*/
+#define M_UBRLCR 0x0C /* mode reg mid (MSB of baud)*/
#define L_UBRLCR 0x10 /* mode reg low (LSB of baud)*/
#define UARTCON 0x14 /* control register */
#define UARTFLG 0x18 /* flag register */
diff --git a/include/asm-arm/arch-l7200/uncompress.h b/include/asm-arm/arch-l7200/uncompress.h
index 9fcd40a..04be2a0 100644
--- a/include/asm-arm/arch-l7200/uncompress.h
+++ b/include/asm-arm/arch-l7200/uncompress.h
@@ -6,7 +6,7 @@
* Changelog:
* 05-01-2000 SJH Created
* 05-13-2000 SJH Filled in function bodies
- * 07-26-2000 SJH Removed hard coded buad rate
+ * 07-26-2000 SJH Removed hard coded baud rate
*/
#include <asm/hardware.h>
--
PGP-Key 0xD40E0E7A
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/