Re: [RFC, PATCH 1/24] i386 Vmi documentation

From: Zachary Amsden
Date: Wed Mar 22 2006 - 17:01:43 EST


Andi Kleen wrote:
On Monday 13 March 2006 18:59, Zachary Amsden wrote:

+ The general mechanism for providing customized features and
+ capabilities is to provide notification of these feature through
+ the CPUID call,

How should that work since CPUID cannot be intercepted by a Hypervisor (without VMX/SVM)?

It can be intercepted with a VMI call. I actually think overloading this for VM features as well, although convenient, might turn out to be unwieldy.


+ Watchdog NMIs are of limited use if the OS is
+ already correct and running on stable hardware;

So how would your Hypervisor detect a kernel hung with interrupts
off then?

The hypervisor can detect it fine - we never disable hardware interrupts or NMIs except for very small windows in the fault handlers. I'm arguing that philosophically, using NMIs to detect a software hang means you have broken software. NMIs for detecting hardware induced hangs are common and reasonable things to do, but on virtual hardware, that shouldn't happen either.

profiling NMIs are
+ similarly of less use, since this task is accomplished with more accuracy
+ in the VMM itself

And how does oprofile know about this?

It doesn't. But consider that oprofile is a time based NMI sampler. That is less accurate in a VM when you have virtual time, and, somewhat skewed spacing between NMI delivery, and less than accurate performance counter information. You can get a lot better results for benchmarks using the VMM to sample the guest instead.

; and NMIs for machine check errors should be handled + outside of the VM.

Right now yes, but if we ever implement intelligent memory ECC error handling it's questionable
the hypervisor can do a better job. It has far less information about how memory
is used than the kernel.

Right. I think I may have been too proactive in my defense of disabling NMIs. I agree now, it is a bug, and it really should be supported. But it was a convenient shortcut to getting things working - otherwise you have to have the NMI avoidance logic in entry.S, which is not properly virtualizable (checks raw segments without masking RPL). But seeing as I already fixed that, I think we actually could re-enable NMIs now.

Though the usefulness of common cases may be compromised, having the VM do machine check handling on its own data pages (so it can figure out which processes to kill / recover) is an extremely useful case.

+ CORE INTERFACE CALLS

Did I miss it or do you never describe how to find these entry points?

It should be described in the ROM probing section in more detail. Our documentation is getting better with time ;)

+ VMI_EnableInterrupts
+
+ VMICALL void VMI_EnableInterrupts(void);
+
+ Enable maskable interrupts on the processor. Note that the
+ current implementation always will deliver any pending interrupts
+ on a call which enables interrupts, for compatibility with kernel
+ code which expects this behavior. Whether this should be required
+ is open for debate.

A subtle trap is also that it will do so on the next instruction, not the followon to next like a real x86. At some point there was code in Linux
that dependend on this.

There still is. This is why you have the "sti; sysexit" pair, and why safe_halt() is "sti; hlt". You really don't want interrupts in those windows. The architectural oddity forced us to make these calls into the VMI interface. A third one, used by some operating systems, is "sti; nop; cli" - i.e. deliver pending interrupts and disable again. In most other cases, it doesn't matter.

+ VMICALL VMI_UINT64 VMI_RDMSR(VMI_UINT64 dummy, VMI_UINT32 reg);
+
+ Read from a model specific register. This functions identically to the
+ hardware RDMSR instruction. Note that a hypervisor may not implement
+ the full set of MSRs supported by native hardware, since many of them
+ are not useful in the context of a virtual machine.

So what happens when the kernel tries to access an unimplemented MSR?

Also we have had occasionally workarounds in the past that required MSR writes with magic "passwords". How would these be handled?

I actually already implemented your suggestion on making MSR reads and writes use trap and emulate - so all of these issues go away. Whether forcing trap and emulate is a good idea for a minimal open source hypervisor is another debate.

+
+ VMI_CPUID
+
+ /* Not expressible as a C function */
+
+ The CPUID instruction provides processor feature identification in a
+ vendor specific manner. The instruction itself is non-virtualizable
+ without hardware support, requiring a hypervisor assisted CPUID call
+ that emulates the effect of the native instruction, while masking any
+ unsupported CPU feature bits.

Doesn't seem to be very useful because everybody can just call CPUID directly.

Which is why the kernel _must_ use the CPUID VMI call. We're a little bit broken in this respect today, since the boot code in head.S does CPUID probing before the VMI init call. It works for us because we use binary translation of the kernel up to this point. In the end, this will disappear, and the CPUID probing will be done in the alternative entry point known as the "start of day" state, where the kernel is already pre-virtualized.

Yes, but it will be wrong in a native kernel too so why do you want
to be better than native?

Seems useless to me.

Agree. TSC is broken in so many ways, that it really should not be used for anything other than unreliable cycle counting.

+ VMI_RDPMC
+
+ VMICALL VMI_UINT64 VMI_RDPMC(VMI_UINT64 dummy, VMI_UINT32 counter);
+
+ Similar to RDTSC, this call provides the functionality of reading
+ processor performance counters. It also is selectively visible to
+ userspace, and maintaining accurate data for the performance counters
+ is an extremely difficult task due to the side effects introduced by
+ the hypervisor.

Similar.

Overall feeling is you have far too many calls. You seem to try to implement
a full x86 replacement, but that makes it big and likely to be buggy. And it's likely impossible to implement in any Hypervisor short of a full emulator
like yours.

I would try a diet and only implement facilities that are actually likely
to be used by modern OS.

The interface can't really go on too much of a diet - some kernel somewhere, maybe not Linux, under some hypervisor, maybe not VMware or Xen, may want to use these features. What the interface can be is an a la carte menu. By allowing specific instructions to fall back to trap and emulate, mainstream OSes don't need to be bothered with changing to match some rich interface. Other OSes may have vastly different requirements, and might want to make use of these features heavily, if they are available. And hypervisors don't need to implement anything special for these either. Our RDPMC implementation in the ROM is quite simple:

/*
* VMI_RDPMC - Binary RDPMC equivalent
* Must clobber no registers (other than %eax, %edx return)
*/
VMI_ENTRY(RDPMC)
rdpmc
vmireturn
VMI_CALL_END

Taken to the extreme, where the patch processing is done before the kernel runs, in the hypervisor itself, using the annotation table provided by the guest kernel, it is even easier. If you see an annotation for a feature you don't care to implement, you don't do anything at all - you leave the native instructions as they are. In this case, neither the kernel nor the hypervisor has any extra code at all to deal with cases they don't care about. But the rich interface is still there, and if someone wants to bathe in butter, who are we to judge. There certainly are uses for it. For example, WRMSR is not on critical paths in i386 Linux today. That does not mean we should remove it from the interface. When a new processor core comes along, and all of a sudden, you really need that interface back, you want it ready for use. And this case really did happen - FSBASE and GSBASE MSR writes moved onto the critical path in x86_64.

I think I carried the diet analogy a little far.

There was one other point I wanted to make but I forgot it now @)

Thanks again for your feedback,

Zach

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/