[PATCH] Typos grab bag of the month

From: Alexey Dobriyan
Date: Sat Mar 04 2006 - 17:06:17 EST

Eyeballed by jmc@ in OpenBSD.

Signed-off-by: Alexey Dobriyan <adobriyan@xxxxxxxxx>
---

Looks like typo in av7110.c is user-visible.

Documentation/m68k/README.buddha | 2 +-
Documentation/networking/ifenslave.c | 2 +-
arch/arm/lib/copy_template.S | 2 +-
drivers/char/mxser.h | 2 +-
drivers/char/synclink.c | 2 +-
drivers/edac/edac_mc.c | 2 +-
drivers/ide/ide.c | 2 +-
drivers/media/dvb/dvb-core/demux.h | 2 +-
drivers/media/dvb/dvb-usb/dvb-usb-init.c | 2 +-
drivers/media/dvb/dvb-usb/dvb-usb.h | 2 +-
drivers/media/dvb/ttpci/av7110.c | 2 +-
drivers/media/video/cpia.c | 2 +-
drivers/media/video/videocodec.h | 2 +-
drivers/media/video/zr36050.c | 2 +-
drivers/media/video/zr36060.c | 2 +-
drivers/media/video/zr36120_i2c.c | 2 +-
drivers/net/irda/nsc-ircc.c | 2 +-
drivers/net/sis900.c | 2 +-
drivers/net/tulip/de4x5.c | 2 +-
drivers/net/tulip/pnic2.c | 2 +-
drivers/net/typhoon.c | 4 ++--
drivers/net/wireless/orinoco.c | 2 +-
drivers/net/wireless/prism54/isl_ioctl.c | 2 +-
drivers/scsi/3w-9xxx.c | 2 +-
drivers/serial/8250.c | 2 +-
drivers/serial/au1x00_uart.c | 2 +-
drivers/serial/serial_txx9.c | 2 +-
drivers/serial/sunsu.c | 2 +-
drivers/usb/host/ohci-s3c2410.c | 2 +-
drivers/usb/net/zaurus.c | 2 +-
fs/mbcache.c | 2 +-
include/asm-parisc/pdc.h | 2 +-
include/asm-sh/addrspace.h | 2 +-
include/asm-sparc64/floppy.h | 2 +-
include/linux/fb.h | 2 +-
mm/mempolicy.c | 2 +-
net/irda/af_irda.c | 6 +++---
sound/pci/rme32.c | 8 ++++----
sound/pci/rme96.c | 8 ++++----
sound/pci/rme9652/hdspm.c | 2 +-
sound/usb/usx2y/usx2yhwdeppcm.c | 2 +-
41 files changed, 50 insertions(+), 50 deletions(-)

--- a/arch/arm/lib/copy_template.S
+++ b/arch/arm/lib/copy_template.S
@@ -236,7 +236,7 @@


/*
- * Abort preanble and completion macros.
+ * Abort preamble and completion macros.
* If a fixup handler is required then those macros must surround it.
* It is assumed that the fixup code will handle the private part of
* the exit macro.
--- a/Documentation/m68k/README.buddha
+++ b/Documentation/m68k/README.buddha
@@ -29,7 +29,7 @@ address is written to $4a, then the whol
$48, while it doesn't matter how often you're writing to $4a
as long as $48 is not touched. After $48 has been written,
the whole card disappears from $e8 and is mapped to the new
-address just written. Make shure $4a is written before $48,
+address just written. Make sure $4a is written before $48,
otherwise your chance is only 1:16 to find the board :-).

The local memory-map is even active when mapped to $e8:
--- a/Documentation/networking/ifenslave.c
+++ b/Documentation/networking/ifenslave.c
@@ -87,7 +87,7 @@
* would fail and generate an error message in the system log.
* - For opt_c: slave should not be set to the master's setting
* while it is running. It was already set during enslave. To
- * simplify things, it is now handeled separately.
+ * simplify things, it is now handled separately.
*
* - 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
* - Code cleanup and style changes
--- a/drivers/char/mxser.h
+++ b/drivers/char/mxser.h
@@ -118,7 +118,7 @@

// enable CTS interrupt
#define MOXA_MUST_IER_ECTSI 0x80
-// eanble RTS interrupt
+// enable RTS interrupt
#define MOXA_MUST_IER_ERTSI 0x40
// enable Xon/Xoff interrupt
#define MOXA_MUST_IER_XINT 0x20
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -6025,7 +6025,7 @@ static void usc_set_async_mode( struct m
* <15..8> ? RxFIFO IRQ Request Level
*
* Note: For async mode the receive FIFO level must be set
- * to 0 to aviod the situation where the FIFO contains fewer bytes
+ * to 0 to avoid the situation where the FIFO contains fewer bytes
* than the trigger level and no more data is expected.
*
* <7> 0 Exited Hunt IA (Interrupt Arm)
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -2117,7 +2117,7 @@ static int __init edac_mc_init(void)
/* perform check for first time to harvest boot leftovers */
do_edac_check();

- /* Create the MC sysfs entires */
+ /* Create the MC sysfs entries */
if (edac_sysfs_memctrl_setup()) {
printk(KERN_ERR "EDAC MC: Error initializing sysfs code\n");
return -ENODEV;
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -452,7 +452,7 @@ void ide_hwif_release_regions(ide_hwif_t
* @hwif: hwif to update
* @tmp_hwif: template
*
- * Restore hwif to a previous state by copying most settngs
+ * Restore hwif to a previous state by copying most settings
* from the template.
*/

--- a/drivers/media/dvb/dvb-core/demux.h
+++ b/drivers/media/dvb/dvb-core/demux.h
@@ -216,7 +216,7 @@ struct dmx_frontend {
/*--------------------------------------------------------------------------*/

/*
- * Flags OR'ed in the capabilites field of struct dmx_demux.
+ * Flags OR'ed in the capabilities field of struct dmx_demux.
*/

#define DMX_TS_FILTERING 1
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -87,7 +87,7 @@ struct dvb_usb_device;

/**
* struct dvb_usb_properties - properties of a dvb-usb-device
- * @caps: capabilites of the DVB USB device.
+ * @caps: capabilities of the DVB USB device.
* @pid_filter_count: number of PID filter position in the optional hardware
* PID-filter.
*
--- a/drivers/media/dvb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
@@ -47,7 +47,7 @@ static int dvb_usb_init(struct dvb_usb_d

d->state = DVB_USB_STATE_INIT;

-/* check the capabilites and set appropriate variables */
+/* check the capabilities and set appropriate variables */

/* speed - when running at FULL speed we need a HW PID filter */
if (d->udev->speed == USB_SPEED_FULL && !(d->props.caps & DVB_USB_HAS_PID_FILTER)) {
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -1439,7 +1439,7 @@ static int check_firmware(struct av7110*
len = ntohl(*(u32*) ptr);
ptr += 4;
if (len >= 512) {
- printk("dvb-ttpci: dpram file is way to big.\n");
+ printk("dvb-ttpci: dpram file is way too big.\n");
return -EINVAL;
}
if (crc != crc32_le(0, ptr, len)) {
--- a/drivers/media/video/cpia.c
+++ b/drivers/media/video/cpia.c
@@ -3369,7 +3369,7 @@ static int cpia_do_ioctl(struct inode *i
//DBG("cpia_ioctl: %u\n", ioctlnr);

switch (ioctlnr) {
- /* query capabilites */
+ /* query capabilities */
case VIDIOCGCAP:
{
struct video_capability *b = arg;
--- a/drivers/media/video/videocodec.h
+++ b/drivers/media/video/videocodec.h
@@ -56,7 +56,7 @@
the slave is bound to it). Otherwise it doesn't need this functions and
therfor they may not be initialized.

- The other fuctions are just for convenience, as they are for shure used by
+ The other fuctions are just for convenience, as they are for sure used by
most/all of the codecs. The last ones may be ommited, too.

See the structure declaration below for more information and which data has
--- a/drivers/media/video/zr36050.c
+++ b/drivers/media/video/zr36050.c
@@ -159,7 +159,7 @@ zr36050_wait_end (struct zr36050 *ptr)

while (!(zr36050_read_status1(ptr) & 0x4)) {
udelay(1);
- if (i++ > 200000) { // 200ms, there is for shure something wrong!!!
+ if (i++ > 200000) { // 200ms, there is for sure something wrong!!!
dprintk(1,
"%s: timout at wait_end (last status: 0x%02x)\n",
ptr->name, ptr->status1);
--- a/drivers/media/video/zr36060.c
+++ b/drivers/media/video/zr36060.c
@@ -161,7 +161,7 @@ zr36060_wait_end (struct zr36060 *ptr)

while (zr36060_read_status(ptr) & ZR060_CFSR_Busy) {
udelay(1);
- if (i++ > 200000) { // 200ms, there is for shure something wrong!!!
+ if (i++ > 200000) { // 200ms, there is for sure something wrong!!!
dprintk(1,
"%s: timout at wait_end (last status: 0x%02x)\n",
ptr->name, ptr->status);
--- a/drivers/media/video/zr36120_i2c.c
+++ b/drivers/media/video/zr36120_i2c.c
@@ -65,7 +65,7 @@ void attach_inform(struct i2c_bus *bus,
case I2C_DRIVERID_VIDEODECODER:
DEBUG(printk(CARD_INFO "decoder attached\n",CARD));

- /* fetch the capabilites of the decoder */
+ /* fetch the capabilities of the decoder */
rv = i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_GET_CAPABILITIES, &dc);
if (rv) {
DEBUG(printk(CARD_DEBUG "decoder is not V4L aware!\n",CARD));
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -705,7 +705,7 @@ static int nsc_ircc_init_39x(nsc_chip_t
int cfg_base = info->cfg_base;
int enabled;

- /* User is shure about his config... accept it. */
+ /* User is sure about his config... accept it. */
IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): "
"io=0x%04x, irq=%d, dma=%d\n",
__FUNCTION__, info->fir_base, info->irq, info->dma);
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -2282,7 +2282,7 @@ static void set_rx_mode(struct net_devic
int i, table_entries;
u32 rx_mode;

- /* 635 Hash Table entires = 256(2^16) */
+ /* 635 Hash Table entries = 256(2^16) */
if((sis_priv->chipset_rev >= SIS635A_900_REV) ||
(sis_priv->chipset_rev == SIS900B_900_REV))
table_entries = 16;
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -513,7 +513,7 @@ struct mii_phy {
u_char *rst; /* Start of reset sequence in SROM */
u_int mc; /* Media Capabilities */
u_int ana; /* NWay Advertisement */
- u_int fdx; /* Full DupleX capabilites for each media */
+ u_int fdx; /* Full DupleX capabilities for each media */
u_int ttm; /* Transmit Threshold Mode for each media */
u_int mci; /* 21142 MII Connector Interrupt info */
};
--- a/drivers/net/tulip/pnic2.c
+++ b/drivers/net/tulip/pnic2.c
@@ -199,7 +199,7 @@ void pnic2_lnk_change(struct net_device
/* negotiation ended successfully */

/* get the link partners reply and mask out all but
- * bits 24-21 which show the partners capabilites
+ * bits 24-21 which show the partners capabilities
* and match those to what we advertised
*
* then begin to interpret the results of the negotiation.
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -208,7 +208,7 @@ static struct typhoon_card_info typhoon_
};

/* Notes on the new subsystem numbering scheme:
- * bits 0-1 indicate crypto capabilites: (0) variable, (1) DES, or (2) 3DES
+ * bits 0-1 indicate crypto capabilities: (0) variable, (1) DES, or (2) 3DES
* bit 4 indicates if this card has secured firmware (we don't support it)
* bit 8 indicates if this is a (0) copper or (1) fiber card
* bits 12-16 indicate card type: (0) client and (1) server
@@ -788,7 +788,7 @@ typhoon_start_tx(struct sk_buff *skb, st
/* we have two rings to choose from, but we only use txLo for now
* If we start using the Hi ring as well, we'll need to update
* typhoon_stop_runtime(), typhoon_interrupt(), typhoon_num_free_tx(),
- * and TXHI_ENTIRES to match, as well as update the TSO code below
+ * and TXHI_ENTRIES to match, as well as update the TSO code below
* to get the right DMA address
*/
txRing = &tp->txLoRing;
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -3858,7 +3858,7 @@ static int orinoco_ioctl_setscan(struct
unsigned long flags;

/* Note : you may have realised that, as this is a SET operation,
- * this is priviledged and therefore a normal user can't
+ * this is privileged and therefore a normal user can't
* perform scanning.
* This is not an error, while the device perform scanning,
* traffic doesn't flow, so it's a perfect DoS...
--- a/drivers/net/wireless/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -747,7 +747,7 @@ prism54_get_essid(struct net_device *nde

if (essid->length) {
dwrq->flags = 1; /* set ESSID to ON for Wireless Extensions */
- /* if it is to big, trunk it */
+ /* if it is too big, trunk it */
dwrq->length = min((u8)IW_ESSID_MAX_SIZE, essid->length);
} else {
dwrq->flags = 0;
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -1030,7 +1030,7 @@ static void twa_free_request_id(TW_Devic
tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH;
} /* End twa_free_request_id() */

-/* This function will get parameter table entires from the firmware */
+/* This function will get parameter table entries from the firmware */
static void *twa_get_param(TW_Device_Extension *tw_dev, int request_id, int table_id, int parameter_id, int parameter_size_bytes)
{
TW_Command_Full *full_command_packet;
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1528,7 +1528,7 @@ static int serial8250_startup(struct uar

/*
* Clear the FIFO buffers and disable them.
- * (they will be reeanbled in set_termios())
+ * (they will be reenabled in set_termios())
*/
serial8250_clear_fifos(up);

--- a/drivers/serial/au1x00_uart.c
+++ b/drivers/serial/au1x00_uart.c
@@ -603,7 +603,7 @@ static int serial8250_startup(struct uar

/*
* Clear the FIFO buffers and disable them.
- * (they will be reeanbled in set_termios())
+ * (they will be reenabled in set_termios())
*/
if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) {
serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -481,7 +481,7 @@ static int serial_txx9_startup(struct ua

/*
* Clear the FIFO buffers and disable them.
- * (they will be reeanbled in set_termios())
+ * (they will be reenabled in set_termios())
*/
sio_set(up, TXX9_SIFCR,
TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -644,7 +644,7 @@ static int sunsu_startup(struct uart_por

/*
* Clear the FIFO buffers and disable them.
- * (they will be reeanbled in set_termios())
+ * (they will be reenabled in set_termios())
*/
if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) {
serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -158,7 +158,7 @@ static int ohci_s3c2410_hub_control (
"s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
hcd, typeReq, wValue, wIndex, buf, wLength);

- /* if we are only an humble host without any special capabilites
+ /* if we are only an humble host without any special capabilities
* process the request straight away and exit */

if (info == NULL) {
--- a/drivers/usb/net/zaurus.c
+++ b/drivers/usb/net/zaurus.c
@@ -217,7 +217,7 @@ static int blan_mdlm_bind(struct usbnet
* with devices that use it and those that don't.
*/
if ((detail->bDetailData[1] & ~0x02) != 0x01) {
- /* bmDataCapabilites == 0 would be fine too,
+ /* bmDataCapabilities == 0 would be fine too,
* but framing is minidriver-coupled for now.
*/
bad_detail:
--- a/fs/mbcache.c
+++ b/fs/mbcache.c
@@ -311,7 +311,7 @@ fail:
/*
* mb_cache_shrink()
*
- * Removes all cache entires of a device from the cache. All cache entries
+ * Removes all cache entries of a device from the cache. All cache entries
* currently in use cannot be freed, and thus remain in the cache. All others
* are freed.
*
--- a/include/asm-parisc/pdc.h
+++ b/include/asm-parisc/pdc.h
@@ -333,7 +333,7 @@ struct pdc_model { /* for PDC_MODEL */
unsigned long curr_key;
};

-/* Values for PDC_MODEL_CAPABILITES non-equivalent virtual aliasing support */
+/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */

#define PDC_MODEL_IOPDIR_FDC (1 << 2) /* see sba_iommu.c */
#define PDC_MODEL_NVA_MASK (3 << 4)
--- a/include/asm-sh/addrspace.h
+++ b/include/asm-sh/addrspace.h
@@ -13,7 +13,7 @@

#include <asm/cpu/addrspace.h>

-/* Memory segments (32bit Priviledged mode addresses) */
+/* Memory segments (32bit Privileged mode addresses) */
#define P0SEG 0x00000000
#define P1SEG 0x80000000
#define P2SEG 0xa0000000
--- a/include/asm-sparc64/floppy.h
+++ b/include/asm-sparc64/floppy.h
@@ -738,7 +738,7 @@ static unsigned long __init sun_floppy_i
if (!sun_floppy_types[0] && sun_floppy_types[1]) {
/*
* Set the drive exchange bit in FCR on NS87303,
- * make shure other bits are sane before doing so.
+ * make sure other bits are sane before doing so.
*/
ns87303_modify(config, FER, FER_EDM, 0);
ns87303_modify(config, ASC, ASC_DRV2_SEL, 0);
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -734,7 +734,7 @@ struct fb_tile_ops {

/* A driver may set this flag to indicate that it does want a set_par to be
* called every time when fbcon_switch is executed. The advantage is that with
- * this flag set you can really be shure that set_par is always called before
+ * this flag set you can really be sure that set_par is always called before
* any of the functions dependant on the correct hardware state or altering
* that state, even if you are using some broken X releases. The disadvantage
* is that it introduces unwanted delays to every console switch if set_par
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -937,7 +937,7 @@ asmlinkage long sys_migrate_pages(pid_t
/*
* Check if this process has the right to modify the specified
* process. The right exists if the process has administrative
- * capabilities, superuser priviledges or the same
+ * capabilities, superuser privileges or the same
* userid as the target process.
*/
if ((current->euid != task->suid) && (current->euid != task->uid) &&
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -1302,7 +1302,7 @@ static int irda_sendmsg(struct kiocb *io
if (sk->sk_state != TCP_ESTABLISHED)
return -ENOTCONN;

- /* Check that we don't send out to big frames */
+ /* Check that we don't send out too big frames */
if (len > self->max_data_size) {
IRDA_DEBUG(2, "%s(), Chopping frame from %zd to %d bytes!\n",
__FUNCTION__, len, self->max_data_size);
@@ -1546,7 +1546,7 @@ static int irda_sendmsg_dgram(struct kio
IRDA_ASSERT(self != NULL, return -1;);

/*
- * Check that we don't send out to big frames. This is an unreliable
+ * Check that we don't send out too big frames. This is an unreliable
* service, so we have no fragmentation and no coalescence
*/
if (len > self->max_data_size) {
@@ -1642,7 +1642,7 @@ static int irda_sendmsg_ultra(struct kio
}

/*
- * Check that we don't send out to big frames. This is an unreliable
+ * Check that we don't send out too big frames. This is an unreliable
* service, so we have no fragmentation and no coalescence
*/
if (len > self->max_data_size) {
--- a/sound/pci/rme32.c
+++ b/sound/pci/rme32.c
@@ -313,7 +313,7 @@ static int snd_rme32_capture_copy(struct
}

/*
- * SPDIF I/O capabilites (half-duplex mode)
+ * SPDIF I/O capabilities (half-duplex mode)
*/
static struct snd_pcm_hardware snd_rme32_spdif_info = {
.info = (SNDRV_PCM_INFO_MMAP_IOMEM |
@@ -339,7 +339,7 @@ static struct snd_pcm_hardware snd_rme32
};

/*
- * ADAT I/O capabilites (half-duplex mode)
+ * ADAT I/O capabilities (half-duplex mode)
*/
static struct snd_pcm_hardware snd_rme32_adat_info =
{
@@ -364,7 +364,7 @@ static struct snd_pcm_hardware snd_rme32
};

/*
- * SPDIF I/O capabilites (full-duplex mode)
+ * SPDIF I/O capabilities (full-duplex mode)
*/
static struct snd_pcm_hardware snd_rme32_spdif_fd_info = {
.info = (SNDRV_PCM_INFO_MMAP |
@@ -390,7 +390,7 @@ static struct snd_pcm_hardware snd_rme32
};

/*
- * ADAT I/O capabilites (full-duplex mode)
+ * ADAT I/O capabilities (full-duplex mode)
*/
static struct snd_pcm_hardware snd_rme32_adat_fd_info =
{
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -2256,7 +2256,7 @@ static int snd_hdspm_create_controls(str
}

/* Channel playback mixer as default control
- Note: the whole matrix would be 128*HDSPM_MIXER_CHANNELS Faders, thats to big for any alsamixer
+ Note: the whole matrix would be 128*HDSPM_MIXER_CHANNELS Faders, thats too big for any alsamixer
they are accesible via special IOCTL on hwdep
and the mixer 2dimensional mixer control */

--- a/sound/pci/rme96.c
+++ b/sound/pci/rme96.c
@@ -359,7 +359,7 @@ snd_rme96_capture_copy(struct snd_pcm_su
}

/*
- * Digital output capabilites (S/PDIF)
+ * Digital output capabilities (S/PDIF)
*/
static struct snd_pcm_hardware snd_rme96_playback_spdif_info =
{
@@ -388,7 +388,7 @@ static struct snd_pcm_hardware snd_rme96
};

/*
- * Digital input capabilites (S/PDIF)
+ * Digital input capabilities (S/PDIF)
*/
static struct snd_pcm_hardware snd_rme96_capture_spdif_info =
{
@@ -417,7 +417,7 @@ static struct snd_pcm_hardware snd_rme96
};

/*
- * Digital output capabilites (ADAT)
+ * Digital output capabilities (ADAT)
*/
static struct snd_pcm_hardware snd_rme96_playback_adat_info =
{
@@ -442,7 +442,7 @@ static struct snd_pcm_hardware snd_rme96
};

/*
- * Digital input capabilites (ADAT)
+ * Digital input capabilities (ADAT)
*/
static struct snd_pcm_hardware snd_rme96_capture_adat_info =
{
--- a/sound/usb/usx2y/usx2yhwdeppcm.c
+++ b/sound/usb/usx2y/usx2yhwdeppcm.c
@@ -404,7 +404,7 @@ static void usX2Y_usbpcm_subs_startup(st
struct usX2Ydev * usX2Y = subs->usX2Y;
usX2Y->prepare_subs = subs;
subs->urb[0]->start_frame = -1;
- smp_wmb(); // Make shure above modifications are seen by i_usX2Y_subs_startup()
+ smp_wmb(); // Make sure above modifications are seen by i_usX2Y_subs_startup()
usX2Y_urbs_set_complete(usX2Y, i_usX2Y_usbpcm_subs_startup);
}


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/