Re: Areca RAID driver remaining items?

From: erich
Date: Thu Feb 23 2006 - 21:34:20 EST


Dear Alan Cox,

This is good idea to make black list to prevent system hang up with MSI function.
But arcmsr need to come up against none specific mainboards.
The case at my lab have same chipset but different maker.

Best Regards
Erich Chen

----- Original Message ----- From: "Alan Cox" <alan@xxxxxxxxxxxxxxxxxxx>
To: "erich" <erich@xxxxxxxxxxxx>
Cc: "Arjan van de Ven" <arjan@xxxxxxxxxxxxx>; ""Christoph Hellwig"" <hch@xxxxxxxxxxxxx>; <linux-scsi@xxxxxxxxxxxxxxx>; <linux-kernel@xxxxxxxxxxxxxxx>; <billion.wu@xxxxxxxxxxxx>; <akpm@xxxxxxxx>; <oliver@xxxxxxxxxx>
Sent: Thursday, February 23, 2006 7:59 PM
Subject: Re: Areca RAID driver remaining items?


On Iau, 2006-02-23 at 17:50 +0800, erich wrote:
But unfortunately I found some mainboards will hang up if I always enable
this function in my lab.
To avoid this issue, I do an option for this case.

But Christoph Hellwig give me comment with it.


Another thing you can also do for many of these cases is to use either
the PCI or DMI interfaces to identify the problem board and
automatically set the option as well.

There are two ways to do this. One is

struct pci_dev *bridge_dev = pci_get_slot(pdev->bus, PCI_DEVFN(0,0));
if(bridge_dev) {
if(bridge_dev->subsystem_vendor == 0xXXXX &&
bridge_dev->subsystem_device == 0xXXXX)
/* Match by svid/sdid for problem boards */

The other is like this

#include <linux/dmi.h>

struct dmi_system_id problem_dmi_table[] = {
{
.ident = "Broken Board Name 1",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "EvilCorp");
DMI_MATCH(DMI_PRODUCTNAME, "Wombat 1000");
}
}
{
ditto per board
},
{ } /* End of list mark
};


And then

if (dmi_system_check(problem_dmi_table))
disable_msi..


The DMI code matches on the DMI strings in the ROM BIOS (the ones dumped
by 'dmidecode')


An example driver using this interface is drivers/char/sonypi.c which
uses it to make sure it *is* only run on a sony laptop.

Alan


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/