[PATCH] SPI: add support for PNX/SPI controller

From: Vitaly Wool
Date: Fri Dec 23 2005 - 09:13:23 EST

Hi,
inlined is a pretty much _development_ version of the Philips SPI controller support we're working with on some Philips ARM targets (PNX0106 and PNX4008, namely) based on spi_bitbang library from David Brownell. It's quite a notable thing that this buggy and in some way complicated SPI controller fits well in this bitbang framework! :)
This patch also contains dumb EEPROM driver for the onboard EEPROM behind the SPI bus. This driver was used by us for controller driver testing, mainly.

Signed-off-by: Vitaly Wool <vwool@xxxxxxxxxxxxx>
Signed-off-by: Dmitry Pervusin <dpervushin@xxxxxxxxx>

drivers/spi/Kconfig | 8
drivers/spi/Makefile | 2
drivers/spi/eeprom.c | 127 ++++++++++++
drivers/spi/spi_pnx.c | 365 ++++++++++++++++++++++++++++++++++++
drivers/spi/spi_pnx.h | 60 ++++++
include/asm-arm/arch-pnx4008/spi.h | 370 +++++++++++++++++++++++++++++++++++++
6 files changed, 932 insertions(+)

Index: linux-2.6/drivers/spi/Kconfig
===================================================================
--- linux-2.6.orig/drivers/spi/Kconfig
+++ linux-2.6/drivers/spi/Kconfig
@@ -95,6 +95,14 @@ config SPI_BUTTERFLY
# Add new SPI master controllers in alphabetical order above this line
#

+config SPI_PNX
+ tristate "PNX SPI bus support"
+ depends on ARCH_PNX4008 && SPI_BITBANG
+
+config SPI_EEPROM
+ tristate "SPI EEPROM"
+ depends on SPI
+

#
# There are lots of SPI device types, with sensors and memory
Index: linux-2.6/drivers/spi/Makefile
===================================================================
--- linux-2.6.orig/drivers/spi/Makefile
+++ linux-2.6/drivers/spi/Makefile
@@ -13,9 +13,11 @@ obj-$(CONFIG_SPI_MASTER) += spi.o
# SPI master controller drivers (bus)
obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
+obj-$(CONFIG_SPI_PNX) += spi_pnx.o
# ... add above this line ...

# SPI protocol drivers (device/link on bus)
+obj-$(CONFIG_SPI_EEPROM) += eeprom.o
# ... add above this line ...

# SPI slave controller drivers (upstream link)
Index: linux-2.6/drivers/spi/eeprom.c
===================================================================
--- /dev/null
+++ linux-2.6/drivers/spi/eeprom.c
@@ -0,0 +1,127 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/proc_fs.h>
+#include <linux/ctype.h>
+
+#define EEPROM_SIZE 256
+#define DRIVER_NAME "EEPROM"
+#define READ_BUFF_SIZE 160
+
+static int __init spi_eeprom_init(void);
+static void __exit spi_eeprom_cleanup(void);
+
+static int spiee_read_block (struct device *d, void *block)
+{
+ struct spi_device *spi = to_spi_device(d);
+ char cmd[2];
+ struct spi_transfer t[2] = {
+ [0] = {
+ .tx_buf = cmd,
+ .len = sizeof cmd,
+ },
+ [1] = {
+ .rx_buf = block,
+ .len = 256,
+ },
+ };
+ DECLARE_SPI_MESSAGE(m);
+
+ cmd[ 0 ] = 0x03;
+ cmd[ 1 ] = 0x00;
+ list_add_tail(&t[0].link, &m.transfers);
+ list_add_tail(&t[1].link, &m.transfers);
+
+ spi_sync(spi, &m);
+ return 256;
+}
+static ssize_t blk_show (struct device *d, struct device_attribute *attr, char *text )
+{
+ char *rdbuff = kmalloc (256, SLAB_KERNEL);
+ char line1[80],line2[80];
+ char item1[5], item2[5];
+ int bytes, i, x, blen;
+
+ blen = spiee_read_block (d, rdbuff);
+
+ bytes = 0;
+
+ strcpy(text, "");
+ for (i = 0; i < blen; i += 8) {
+ strcpy(line1, "");
+ strcpy(line2, "" );
+ for (x = i; x < i + 8; x++) {
+ if (x > blen) {
+ sprintf(item1, " ");
+ sprintf(item2, " " );
+ } else {
+ sprintf(item1, "%02x ", rdbuff[x]);
+ if (isprint(rdbuff[x])) {
+ sprintf(item2, "%c", rdbuff[x]);
+ } else {
+ sprintf(item2, ".");
+ }
+ }
+ strcat(line1, item1);
+ strcat(line2, item2);
+ }
+
+ strcat(text, line1);
+ strcat(text, "| " );
+ strcat(text, line2);
+ strcat(text, "\n" );
+
+ bytes += (strlen (line1 ) + strlen(line2) + 4);
+ }
+
+ kfree (rdbuff);
+
+ return bytes + 1;
+}
+
+static DEVICE_ATTR(blk, S_IRUGO, blk_show, NULL );
+
+
+static int spiee_probe(struct spi_device *this_dev)
+{
+ device_create_file(&this_dev->dev, &dev_attr_blk);
+ return 0;
+}
+
+static int spiee_remove(struct spi_device *this_dev)
+{
+ device_remove_file(&this_dev->dev, &dev_attr_blk);
+ return 0;
+}
+
+static struct spi_driver eeprom_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = spiee_probe,
+ .remove = __devexit_p(spiee_remove),
+};
+
+static int __init spi_eeprom_init(void)
+{
+ int rc = spi_register_driver(&eeprom_driver);
+ printk("%s: %d\n", __FUNCTION__, rc);
+ return rc;
+}
+static void __exit spi_eeprom_cleanup(void)
+{
+ spi_unregister_driver(&eeprom_driver);
+}
+
+module_init(spi_eeprom_init);
+module_exit(spi_eeprom_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("dmitry pervushin <dpervushin@xxxxxxxxx>");
+MODULE_DESCRIPTION("SPI EEPROM driver");
Index: linux-2.6/drivers/spi/spi_pnx.c
===================================================================
--- /dev/null
+++ linux-2.6/drivers/spi/spi_pnx.c
@@ -0,0 +1,365 @@
+/*
+ * drivers/spi/spi-pnx.c
+ *
+ * SPI support for PNX 010x/4008 boards.
+ *
+ * Author: dmitry pervushin <dpervushin@xxxxxxxxxxxxx>
+ * Based on Dennis Kovalev's <dkovalev@xxxxxxxxxxxxx> bus driver for pnx010x
+ *
+ * 2004 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <asm/io.h>
+
+#include "spi_pnx.h"
+
+#define lock_device( dev ) /* down( &dev->sem ); */
+#define unlock_device( dev ) /* up( &dev->sem ); */
+
+void spipnx_dma_handler (int channel, int cause, void* context, struct pt_regs* pt_regs )
+{
+ struct spi_pnx_data *dd = context;
+
+ if (cause & DMA_TC_INT)
+ complete(&dd->threshold);
+}
+
+int spipnx_request_hardware(struct spi_pnx_data *dd,
+ struct platform_device *dev)
+{
+ int err = 0;
+ struct resource *rsrc;
+
+ lock_device(&dev->dev);
+ rsrc = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (rsrc) {
+ dd->iostart = rsrc->start;
+ dd->ioend = rsrc->end;
+ dd->spi_regs = ioremap(dd->iostart, SZ_4K);
+ /*
+ if (!request_mem_region
+ (dd->iostart, dd->ioend - dd->iostart + 1, dev->dev.bus_id))
+ err = -ENODEV;
+ else
+ */
+ dd->io_flags |= IORESOURCE_MEM;
+ }
+ dd->clk = spipnx_clk_init(dev);
+ if (IS_ERR(dd->clk)) {
+ err = PTR_ERR(dd->clk);
+ goto out;
+ }
+
+ spipnx_clk_start(dd->clk);
+
+ dd->irq = platform_get_irq(dev, 0);
+ if (dd->irq != NO_IRQ) {
+ dd->spi_regs->ier = 0;
+ dd->spi_regs->stat = 0;
+ }
+
+ rsrc = platform_get_resource(dev, IORESOURCE_DMA, 0);
+ if (rsrc) {
+ dd->slave_nr = rsrc->start;
+ err = spipnx_request_dma(&dd->dma_channel, dev->dev.bus_id, spipnx_dma_handler, dd);
+ if (!err)
+ dd->io_flags |= IORESOURCE_DMA;
+ }
+out:
+ unlock_device(&dev.dev);
+ return err;
+}
+
+static void spipnx_free_hardware(struct spi_pnx_data *dd,
+ struct platform_device *dev)
+{
+ lock_device(&dev->dev);
+
+ spipnx_clk_stop(dd->clk);
+
+ if (dd->io_flags & IORESOURCE_IRQ) {
+ free_irq(dd->irq, dev->dev.bus_id);
+ dd->io_flags &= ~IORESOURCE_IRQ;
+ }
+ if (dd->io_flags & IORESOURCE_MEM) {
+ /*
+ release_mem_region((unsigned long)dd->iostart,
+ dd->ioend - dd->iostart + 1);
+ */
+ dd->io_flags &= ~IORESOURCE_MEM;
+ }
+ if (dd->io_flags & IORESOURCE_DMA) {
+ spipnx_release_dma(&dd->dma_channel);
+ dd->io_flags &= ~IORESOURCE_DMA;
+ }
+
+ spipnx_clk_free(dd->clk);
+
+#ifdef DEBUG
+ if (dd->io_flags)
+ printk(KERN_ERR
+ "Oops, dd_ioflags for driver data %p is still 0x%x!\n",
+ dd, dd->io_flags);
+#endif
+ unlock_device(&dev->dev);
+}
+
+static void
+spi_pnx_chipselect(struct spi_device *spi, int is_on)
+{
+ spipnx_arch_cs(spi, is_on);
+}
+
+static int spi_pnx_xfer(struct spi_device *spidev, struct spi_transfer *t)
+{
+ u8* dat;
+ int len;
+ struct device *dev;
+ struct spi_pnx_data *dd;
+ vhblas_spiregs* regs;
+ int i;
+ u32 stat, fc, con, timeout;
+ struct spipnx_dma_transfer_t params;
+
+ dev = &spidev->dev;
+ dd = dev_get_drvdata(spidev->master->cdev.dev);
+ regs = dd->spi_regs;
+ len = t->len;
+
+ /* REVISIT */
+ con = regs->con;
+ regs->global = SPI_GLOBAL_BLRES_SPI | SPI_GLOBAL_SPI_ON;
+ udelay(10);
+ regs->global = SPI_GLOBAL_SPI_ON;
+ for (timeout = 10000; timeout >= 0; --timeout)
+ if (dd->spi_regs->global & SPIPNX_GLOBAL_SPI_ON)
+ break;
+ con |= (7<<9);
+ con &= ~(SPIPNX_CON_RXTX);
+ regs->con = con;
+
+ if (spidev->max_speed_hz)
+ spi_pnx_set_clock_rate(spidev->max_speed_hz / 1000, regs);
+
+ regs->stat |= 0x100;
+ regs->con |= SPI_CON_SPI_BIDIR | SPI_CON_SPI_BHALT | SPI_CON_SPI_BPOL |
+ SPI_CON_THR | SPI_CON_MS;
+
+ if (t->tx_buf) {
+ dat = (u8 *)t->tx_buf;
+ regs->con |= SPIPNX_CON_RXTX;
+ regs->ier |= SPIPNX_IER_EOT;
+ regs->con &= ~SPIPNX_CON_SHIFT_OFF;
+ regs->frm = len;
+
+ if (dd->dma_mode && len >= FIFO_CHUNK_SIZE) {
+ void *dmasafe = NULL;
+ if (t->tx_dma)
+ params.dma_buffer = t->tx_dma;
+ else {
+ dmasafe = kmalloc(len, SLAB_KERNEL);
+ if (!dmasafe) {
+ len = 0;
+ goto out;
+ }
+ params.dma_buffer = dma_map_single(dev->parent, dmasafe, len, DMA_TO_DEVICE);
+ memcpy(dmasafe, dat, len);
+ }
+ params.saved_ll = NULL;
+ params.saved_ll_dma = 0;
+
+ spipnx_setup_dma(dd->iostart, dd->slave_nr, dd->dma_channel,
+ DMA_MODE_WRITE, &params, len);
+ init_completion (&dd->threshold);
+ spipnx_start_dma(dd->dma_channel);
+ wait_for_completion (&dd->threshold);
+ spipnx_stop_dma(dd->dma_channel, &params);
+ if (dmasafe) {
+ dma_unmap_single(dev->parent, params.dma_buffer, len, DMA_TO_DEVICE);
+ kfree(dmasafe);
+ }
+ } else {
+ regs->con &= ~SPIPNX_CON_SHIFT_OFF;
+ for (i = 0; i < len ; i ++ ) {
+ while (regs->stat & 0x04)
+ continue;
+ regs->dat = *dat;
+ dat ++;
+ }
+ }
+ while ((regs->stat & SPIPNX_STAT_EOT) == 0)
+ continue;
+ }
+
+ if (t->rx_buf) {
+ int stopped;
+ u8 c;
+ void *dmasafe = NULL;
+
+ dat = t->rx_buf;
+ regs->con &= ~SPIPNX_CON_RXTX;
+ regs->ier |= SPIPNX_IER_EOT;
+ regs->con &= ~SPIPNX_CON_SHIFT_OFF;
+ regs->frm = len;
+
+ regs->dat = 0; /* kick off read */
+
+ if (dd->dma_mode && len > FIFO_CHUNK_SIZE - 1) {
+ if (t->rx_dma)
+ params.dma_buffer = t->rx_dma;
+ else {
+ dmasafe = kmalloc(len, SLAB_KERNEL);
+ if (!dmasafe) {
+ len = 0;
+ goto out;
+ }
+ params.dma_buffer = dma_map_single(dev->parent, dmasafe, len - (FIFO_CHUNK_SIZE - 1), DMA_FROM_DEVICE);
+ }
+ params.saved_ll = NULL;
+ params.saved_ll_dma = 0;
+
+ spipnx_setup_dma(dd->iostart, dd->slave_nr, dd->dma_channel,
+ DMA_MODE_READ, &params, len - (FIFO_CHUNK_SIZE - 1));
+ init_completion (&dd->threshold);
+ spipnx_start_dma(dd->dma_channel);
+ wait_for_completion (&dd->threshold);
+ spipnx_stop_dma(dd->dma_channel, &params);
+ if (dmasafe) {
+ memcpy(dat, dmasafe, len - (FIFO_CHUNK_SIZE - 1));
+ dma_unmap_single(dev->parent, params.dma_buffer, len - (FIFO_CHUNK_SIZE - 1), DMA_FROM_DEVICE);
+ kfree(dmasafe);
+ }
+ dat = dat + len - (FIFO_CHUNK_SIZE - 1);
+ len = FIFO_CHUNK_SIZE - 1;
+ }
+
+ stopped = 0;
+ stat = 0;
+ for(i = 0; i < len; ) {
+ unsigned long irq_flags;
+ local_irq_save(irq_flags);
+
+ stat = dd->spi_regs->stat;;
+ fc = dd->spi_regs->frm;
+ /* has hardware finished ? */
+ if(fc == 0) {
+ regs->con |= SPIPNX_CON_SHIFT_OFF;
+ stopped = 1;
+ }
+ /* FIFO not empty and hardware not about to finish */
+ if((!(stat & SPI_STAT_SPI_BE)) && ((fc > 4) || (stopped ))) {
+ *dat++= c = dd->spi_regs->dat;
+ i++;
+ }
+ if((stat & SPI_STAT_SPI_BF) && (!stopped)) {
+ *dat++= c = dd->spi_regs->dat;
+ i++;
+ }
+ local_irq_restore(irq_flags);
+ }
+ }
+out:
+ return len;
+}
+
+static int spi_pnx_setup(struct spi_device *spi)
+{
+ return 0;
+}
+
+static int spi_pnx_probe(struct device *device)
+{
+ struct spi_master *master;
+ struct spi_pnx_data *data;
+ struct spi_bitbang *pnx;
+ int rc = 0;
+
+ printk("spi probe called\n");
+ master = spi_alloc_master(device, sizeof *data);
+ if (!master) {
+ rc = -ENOMEM;
+ goto out;
+ }
+ master->setup = &spi_pnx_setup;
+ master->bus_num = to_platform_device(device)->id;
+
+ pnx = spi_master_get_devdata(master);
+ pnx->master = master;
+ pnx->chipselect = &spi_pnx_chipselect;
+ pnx->txrx_bufs = &spi_pnx_xfer;
+ rc = spi_bitbang_start(pnx);
+ if (rc < 0)
+ goto out;
+
+ data = kzalloc(sizeof *data, GFP_KERNEL);
+ if (!data) {
+ spi_bitbang_stop(pnx);
+ kfree(master);
+ rc = -ENOMEM;
+ goto out;
+ }
+ data->dma_channel = -1;
+ data->slave_nr = -1;
+ data->irq = NO_IRQ;
+ data->master = master;
+ data->dma_mode = 1;
+ dev_set_drvdata(device, data);
+
+ rc = spipnx_request_hardware(data, to_platform_device(device));
+ if (rc < 0) {
+ spi_bitbang_stop(pnx);
+ kfree(master);
+ kfree(data);
+ goto out;
+ }
+out:
+ return rc;
+}
+
+static int spi_pnx_remove(struct device *device)
+{
+ struct spi_pnx_data *data = dev_get_drvdata(device);
+ struct spi_bitbang *pnx;
+
+ pnx = spi_master_get_devdata(data->master);
+
+ spipnx_free_hardware(data, to_platform_device(device));
+ spi_bitbang_stop(pnx);
+ kfree(data->master);
+ kfree(data);
+ return 0;
+}
+
+
+static struct device_driver spi_pnx_driver = {
+ .name = "spipnx",
+ .bus = &platform_bus_type,
+ .probe = spi_pnx_probe,
+ .remove = spi_pnx_remove,
+};
+
+static int __init spi_pnx_init(void)
+{
+ return driver_register(&spi_pnx_driver);
+}
+
+static void __exit spi_pnx_cleanup(void)
+{
+ driver_unregister(&spi_pnx_driver);
+}
+
+module_init(spi_pnx_init);
+module_exit(spi_pnx_cleanup);
Index: linux-2.6/include/asm-arm/arch-pnx4008/spi.h
===================================================================
--- /dev/null
+++ linux-2.6/include/asm-arm/arch-pnx4008/spi.h
@@ -0,0 +1,370 @@
+/*
+ * include/asm-arm/arch-pnx4008/spi.h
+ *
+ * Author: Vitaly Wool <vwool@xxxxxxxxxxxxx>
+ *
+ * PNX4008-specific tweaks for SPI block
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_SPI_H__
+#define __ASM_ARCH_SPI_H__
+
+#include <linux/spi/spi.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <asm/dma.h>
+
+#include <asm/arch/dma.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pm.h>
+#include <asm/arch/gpio.h>
+
+#include <asm/hardware/clock.h>
+
+#define SPI_ADR_OFFSET_GLOBAL 0x0000 /* R/W - Global control register */
+#define SPI_ADR_OFFSET_CON 0x0004 /* R/W - Control register */
+#define SPI_ADR_OFFSET_FRM 0x0008 /* R/W - Frame count register */
+#define SPI_ADR_OFFSET_IER 0x000C /* R/W - Interrupt enable register */
+#define SPI_ADR_OFFSET_STAT 0x0010 /* R/W - Status register */
+#define SPI_ADR_OFFSET_DAT 0x0014 /* R/W - Data register */
+#define SPI_ADR_OFFSET_DAT_MSK 0x0018 /* W - Data register for using mask mode */
+#define SPI_ADR_OFFSET_MASK 0x001C /* R/W - Mask register */
+#define SPI_ADR_OFFSET_ADDR 0x0020 /* R/W - Address register */
+#define SPI_ADR_OFFSET_TIMER_CTRL_REG 0x0400 /* R/W - IRQ timer control register */
+#define SPI_ADR_OFFSET_TIMER_COUNT_REG 0x0404 /* R/W - Timed interrupt period register */
+#define SPI_ADR_OFFSET_TIMER_STATUS_REG 0x0408 /* R;R/C - RxDepth and interrupt status register */
+
+/* Bit definitions for SPI_GLOBAL register */
+#define SPI_GLOBAL_BLRES_SPI 0x00000002 /* R/W - Software reset, active high */
+#define SPI_GLOBAL_SPI_ON 0x00000001 /* R/W - SPI interface on */
+
+/* Bit definitions for SPI_CON register */
+#define SPI_CON_SPI_BIDIR 0x00800000 /* R/W - SPI data in bidir. mux */
+#define SPI_CON_SPI_BHALT 0x00400000 /* R/W - Halt control */
+#define SPI_CON_SPI_BPOL 0x00200000 /* R/W - Busy signal active polarity */
+#define SPI_CON_SPI_SHFT 0x00100000 /* R/W - Data shifting enable in mask mode */
+#define SPI_CON_SPI_MSB 0x00080000 /* R/W - Transfer LSB or MSB first */
+#define SPI_CON_SPI_EN 0x00040000 /* R/W - SPULSE signal enable */
+#define SPI_CON_SPI_MODE 0x00030000 /* R/W - SCK polarity and phase modes */
+#define SPI_CON_SPI_MODE3 0x00030000 /* R/W - SCK polarity and phase mode 3 */
+#define SPI_CON_SPI_MODE2 0x00020000 /* R/W - SCK polarity and phase mode 2 */
+#define SPI_CON_SPI_MODE1 0x00010000 /* R/W - SCK polarity and phase mode 1 */
+#define SPI_CON_SPI_MODE0 0x00000000 /* R/W - SCK polarity and phase mode 0 */
+#define SPI_CON_RxTx 0x00008000 /* R/W - Transfer direction */
+#define SPI_CON_THR 0x00004000 /* R/W - Threshold selection */
+#define SPI_CON_SHIFT_OFF 0x00002000 /* R/W - Inhibits generation of clock pulses on sck_spi pin */
+#define SPI_CON_BITNUM 0x00001E00 /* R/W - No of bits to tx or rx in one block transfer */
+#define SPI_CON_CS_EN 0x00000100 /* R/W - Disable use of CS in slave mode */
+#define SPI_CON_MS 0x00000080 /* R/W - Selection of master or slave mode */
+#define SPI_CON_RATE 0x0000007F /* R/W - Transmit/receive rate */
+
+#define SPI_CON_RATE_0 0x00
+#define SPI_CON_RATE_1 0x01
+#define SPI_CON_RATE_2 0x02
+#define SPI_CON_RATE_3 0x03
+#define SPI_CON_RATE_4 0x04
+#define SPI_CON_RATE_13 0x13
+
+/* Bit definitions for SPI_FRM register */
+#define SPI_FRM_SPIF 0x0000FFFF /* R/W - Number of frames to be transfered */
+
+/* Bit definitions for SPI_IER register */
+#define SPI_IER_SPI_INTCS 0x00000004 /* R/W - SPI CS level change interrupt enable */
+#define SPI_IER_SPI_INTEOT 0x00000002 /* R/W - End of transfer interrupt enable */
+#define SPI_IER_SPI_INTTHR 0x00000001 /* R/W - FIFO threshold interrupt enable */
+
+/* Bit definitions for SPI_STAT register */
+#define SPI_STAT_SPI_INTCLR 0x00000100 /* R/WC - Clear interrupt */
+#define SPI_STAT_SPI_EOT 0x00000080 /* R/W - End of transfer */
+#define SPI_STAT_SPI_BSY_SL 0x00000040 /* R/W - Status of the input pin spi_busy */
+#define SPI_STAT_SPI_CSL 0x00000020 /* R/W - Indication of the edge on SPI_CS that caused an int. */
+#define SPI_STAT_SPI_CSS 0x00000010 /* R/W - Level of SPI_CS has changed in slave mode */
+#define SPI_STAT_SPI_BUSY 0x00000008 /* R/W - A data transfer is ongoing */
+#define SPI_STAT_SPI_BF 0x00000004 /* R/W - FIFO is full */
+#define SPI_STAT_SPI_THR 0x00000002 /* R/W - No of entries in Tx/Rx FIFO */
+#define SPI_STAT_SPI_BE 0x00000001 /* R/W - FIFO is empty */
+
+/* Bit definitions for SPI_DAT register */
+#define SPI_DAT_SPID 0x0000FFFF /* R/W - SPI data bits */
+
+/* Bit definitions for SPI_DAT_MSK register */
+#define SPI_DAT_MSK_SPIDM 0x0000FFFF /* W - SPI data bits to send using the masking mode */
+
+/* Bit definitions for SPI_MASK register */
+#define SPI_MASK_SPIMSK 0x0000FFFF /* R/W - Masking bits used for validating data bits */
+
+/* Bit definitions for SPI_ADDR register */
+#define SPI_ADDR_SPIAD 0x0000FFFF /* R/W - Address bits to add to the data bits */
+
+/* Bit definitions for SPI_TIMER_CTRL_REG register */
+#define SPI_TIMER_CTRL_REG_TIRQE 0x00000004 /* R/W - Timer interrupt enable */
+#define SPI_TIMER_CTRL_REG_PIRQE 0x00000002 /* R/W - Peripheral interrupt enable */
+#define SPI_TIMER_CTRL_REG_MODE 0x00000001 /* R/W - Mode */
+
+/* Bit definitions for SPI_TIMER_COUNT_REG register */
+#define SPI_TIMER_COUNT_REG 0x0000FFFF /* R/W - Timed interrupt period */
+
+/* Bit definitions for SPI_TIMER_STATUS_REG register */
+#define SPI_TIMER_STATUS_REG_INT_STAT 0x00008000 /* R/C - Interrupt status */
+#define SPI_TIMER_STATUS_REG_FIFO_DEPTH 0x0000007F /* R - FIFO depth value (for debug purpose) */
+
+#define SPIPNX_STAT_EOT SPI_STAT_SPI_EOT
+#define SPIPNX_STAT_THR SPI_STAT_SPI_THR
+#define SPIPNX_IER_EOT SPI_IER_SPI_INTEOT
+#define SPIPNX_IER_THR SPI_IER_SPI_INTTHR
+#define SPIPNX_STAT_CLRINT SPI_STAT_SPI_INTCLR
+
+#define SPIPNX_GLOBAL_RESET_SPI SPI_GLOBAL_BLRES_SPI
+#define SPIPNX_GLOBAL_SPI_ON SPI_GLOBAL_SPI_ON
+#define SPIPNX_CON_MS SPI_CON_MS
+#define SPIPNX_CON_BIDIR SPI_CON_SPI_BIDIR
+#define SPIPNX_CON_RXTX SPI_CON_RxTx
+#define SPIPNX_CON_THR SPI_CON_THR
+#define SPIPNX_CON_SHIFT_OFF SPI_CON_SHIFT_OFF
+#define SPIPNX_DATA SPI_ADR_OFFSET_DAT
+#define SPI_PNX4008_CLOCK_IN 104000000
+#define SPI_PNX4008_CLOCK 2670000
+#define SPIPNX_CLOCK ((((SPI_PNX4008_CLOCK_IN / SPI_PNX4008_CLOCK) - 2) / 2) & SPI_CON_RATE_MASK )
+#define SPIPNX_DATA_REG(s) ( (u32)(s) + SPIPNX_DATA )
+
+typedef volatile struct {
+ u32 global; /* 0x000 */
+ u32 con; /* 0x004 */
+ u32 frm; /* 0x008 */
+ u32 ier; /* 0x00C */
+ u32 stat; /* 0x010 */
+ u32 dat; /* 0x014 */
+ u32 dat_msk; /* 0x018 */
+ u32 mask; /* 0x01C */
+ u32 addr; /* 0x020 */
+ u32 _d0[(SPI_ADR_OFFSET_TIMER_CTRL_REG -
+ (SPI_ADR_OFFSET_ADDR + sizeof(u32))) / sizeof(u32)];
+ u32 timer_ctrl; /* 0x400 */
+ u32 timer_count; /* 0x404 */
+ u32 timer_status; /* 0x408 */
+}
+vhblas_spiregs, *pvhblas_spiregs;
+
+#define SPI_CON_RATE_MASK 0x7f
+
+static void spipnx_arch_set_clock_rate( int clock_khz, int ref_clock_khz, vhblas_spiregs* regs )
+{
+ u32 spi_clock;
+
+ printk( "ref clock = %d, requested clock = %d\n", ref_clock_khz, clock_khz);
+ if(!clock_khz)
+ spi_clock = ref_clock_khz < 104000 ? 0 : 1;
+ else
+ spi_clock = (ref_clock_khz/1000) / (2*(clock_khz/1000) + 2);
+ regs->con &= ~SPI_CON_RATE_MASK;
+ printk("SPI clock = %x\n", spi_clock);
+ regs->con |= spi_clock;
+}
+
+static inline void spi_pnx_set_clock_rate(int saved_clock_khz, vhblas_spiregs *regs)
+{
+ struct clk *div_clk= clk_get(0, "hclk_ck");
+ struct clk *arm_clk = clk_get(0, "ck_pll4");
+ if (!IS_ERR(arm_clk) && !IS_ERR(div_clk))
+ spipnx_arch_set_clock_rate(
+ saved_clock_khz,
+ clk_get_rate(arm_clk) / clk_get_rate(div_clk),
+ regs);
+ if (!IS_ERR(arm_clk))
+ clk_put(arm_clk);
+ if (!IS_ERR(div_clk))
+ clk_put(div_clk);
+}
+
+static inline void spipnx_clk_stop(void *clk_data)
+{
+ struct clk *clk = (struct clk *)clk_data;
+ if (clk && !IS_ERR(clk)) {
+ clk_set_rate(clk, 0);
+ clk_put(clk);
+ }
+}
+
+static inline void spipnx_clk_start(void *clk_data)
+{
+ struct clk *clk = (struct clk *)clk_data;
+ if (clk && !IS_ERR(clk)) {
+ clk_set_rate(clk, 1);
+ clk_put(clk);
+ }
+}
+
+static inline void *spipnx_clk_init(struct platform_device *dev)
+{
+ struct clk *clk = clk_get(0, dev->id == 1 ? "spi0_ck" : "spi1_ck");
+ if (IS_ERR(clk))
+ printk("spi%d_ck pointer err\n", dev->id);
+ return clk;
+}
+
+static inline void spipnx_clk_free( void* clk )
+{
+ clk_put( clk );
+}
+
+static inline void spipnx_arch_cs(struct spi_device *spi, int is_on)
+{
+ switch (spi->chip_select)
+ {
+ case 0:
+ printk("setting pin %x to %d\n", GPO_02, !is_on);
+ pnx4008_gpio_write_pin(GPO_02, !is_on);
+ break;
+ case 1:
+ printk( "setting pin %x to %d\n", GPIO_03, !is_on);
+ pnx4008_gpio_write_pin(GPIO_03, !is_on);
+ break;
+ }
+}
+
+static inline int spipnx_request_dma(
+ int *dma_channel, char *name,
+ void (*handler)( int, int, void*, struct pt_regs*),
+ void *dma_context)
+{
+ int err;
+
+ if (*dma_channel != -1) {
+ err = *dma_channel;
+ goto out;
+ }
+ err = pnx4008_request_channel(name, -1, handler, dma_context);
+ if (err >= 0) {
+ *dma_channel = err;
+ }
+out:
+ return err < 0 ? err : 0;
+}
+
+static inline void spipnx_release_dma(int *dma_channel)
+{
+ if (*dma_channel >= 0) {
+ pnx4008_free_channel(*dma_channel);
+ }
+ *dma_channel = -1;
+}
+
+static inline void spipnx_start_dma(int dma_channel)
+{
+ pnx4008_dma_ch_enable(dma_channel);
+}
+
+struct spipnx_dma_transfer_t
+{
+ dma_addr_t dma_buffer;
+ void *saved_ll;
+ u32 saved_ll_dma;
+};
+
+static inline void spipnx_stop_dma(int dma_channel, void* dev_buf)
+{
+ struct spipnx_dma_transfer_t *buf = dev_buf;
+
+ pnx4008_dma_ch_disable(dma_channel);
+ if (buf->saved_ll) {
+ pnx4008_free_ll(buf->saved_ll_dma, buf->saved_ll);
+ buf->saved_ll = NULL;
+ }
+}
+
+static inline int spipnx_setup_dma(u32 iostart, int slave_nr, int dma_channel,
+ int mode, void* params, int len)
+{
+ int err = 0;
+ struct spipnx_dma_transfer_t *buff = params;
+
+ pnx4008_dma_config_t cfg;
+ pnx4008_dma_ch_config_t ch_cfg;
+ pnx4008_dma_ch_ctrl_t ch_ctrl;
+
+ memset(&cfg, 0, sizeof(cfg));
+
+ if (mode == DMA_MODE_READ) {
+ cfg.dest_addr = buff->dma_buffer; /* buff->dma_buffer; */
+ cfg.src_addr = (u32) SPIPNX_DATA_REG(iostart);
+ ch_cfg.flow_cntrl = FC_PER2MEM_DMA;
+ ch_cfg.src_per = slave_nr;
+ ch_cfg.dest_per = 0;
+ ch_ctrl.di = 1;
+ ch_ctrl.si = 0;
+ } else if (mode == DMA_MODE_WRITE) {
+ cfg.src_addr = buff->dma_buffer; /* buff->dma_buffer; */
+ cfg.dest_addr = (u32) SPIPNX_DATA_REG(iostart);
+ ch_cfg.flow_cntrl = FC_MEM2PER_DMA;
+ ch_cfg.dest_per = slave_nr;
+ ch_cfg.src_per = 0;
+ ch_ctrl.di = 0;
+ ch_ctrl.si = 1;
+ } else {
+ err = -EINVAL;
+ }
+
+ ch_cfg.halt = 0;
+ ch_cfg.active = 1;
+ ch_cfg.lock = 0;
+ ch_cfg.itc = 1;
+ ch_cfg.ie = 1;
+ ch_ctrl.tc_mask = 1;
+ ch_ctrl.cacheable = 0;
+ ch_ctrl.bufferable = 0;
+ ch_ctrl.priv_mode = 1;
+ ch_ctrl.dest_ahb1 = 0;
+ ch_ctrl.src_ahb1 = 0;
+ ch_ctrl.dwidth = WIDTH_BYTE;
+ ch_ctrl.swidth = WIDTH_BYTE;
+ ch_ctrl.dbsize = 1;
+ ch_ctrl.sbsize = 1;
+ ch_ctrl.tr_size = len;
+ if (0 > (err = pnx4008_dma_pack_config(&ch_cfg, &cfg.ch_cfg))) {
+ goto out;
+ }
+ if (0 > (err = pnx4008_dma_pack_control(&ch_ctrl, &cfg.ch_ctrl))) {
+ if ( err == -E2BIG ) {
+ printk( KERN_DEBUG"buffer is too large, splitting\n" );
+ pnx4008_dma_split_head_entry(&cfg, &ch_ctrl);
+ buff->saved_ll = cfg.ll;
+ buff->saved_ll_dma = cfg.ll_dma;
+ err = 0;
+ } else {
+ goto out;
+ }
+ }
+ err = pnx4008_config_channel(dma_channel, &cfg);
+out:
+ return err;
+}
+
+static inline void spipnx_start_event_init(int id)
+{
+ int se = id==0 ? SE_SPI1_DATAIN_INT : SE_SPI2_DATAIN_INT;
+
+ /*setup wakeup interrupt*/
+ start_int_set_rising_edge(se);
+ start_int_ack(se);
+ start_int_umask(se);
+}
+
+static inline void spipnx_start_event_deinit(int id)
+{
+ int se = id==0 ? SE_SPI1_DATAIN_INT : SE_SPI2_DATAIN_INT;
+
+ start_int_mask(se);
+}
+
+struct spipnx_wifi_params {
+ int gpio_cs_line;
+};
+
+#endif /* __ASM_ARCH_SPI_H___ */
+
Index: linux-2.6/drivers/spi/spi_pnx.h
===================================================================
--- /dev/null
+++ linux-2.6/drivers/spi/spi_pnx.h
@@ -0,0 +1,60 @@
+/*
+ * SPI support for Philips SPI bus on PNX's.
+ *
+ * Author: Dennis Kovalev <dkovalev@xxxxxxxxxxxxx>
+ *
+ * 2004 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef _SPI_PNX_BUS_DRIVER
+#define _SPI_PNX_BUS_DRIVER
+
+#include <linux/spi/spi.h>
+#include <asm/arch/platform.h>
+#include <asm/arch/dma.h>
+#include <asm/dma.h>
+#include <asm/arch/spi.h>
+
+/* structures */
+struct spi_pnx_data {
+ unsigned io_flags;
+
+ int irq;
+
+ int dma_mode;
+ int dma_channel;
+ int slave_nr;
+
+ u32 iostart, ioend;
+ vhblas_spiregs *spi_regs;
+
+ struct clk *clk;
+ int clk_id[4];
+
+ int state;
+ u32 saved_clock;
+
+ struct completion op_complete;
+ struct completion threshold;
+
+ int progress;
+ struct spi_master *master;
+
+ void (*control) (struct spi_device * dev, int code, u32 ctl);
+};
+
+#define SPIPNX_STATE_UNINITIALIZED 0
+#define SPIPNX_STATE_READY 1
+#define SPIPNX_STATE_SUSPENDED 2
+
+#define SPIPNX_IS_READY( bus ) ( (bus)->state == SPIPNX_STATE_READY )
+
+#define FIFO_CHUNK_SIZE 56
+
+#define SPI_ENDIAN_SWAP_NO 0
+#define SPI_ENDIAN_SWAP_YES 1
+
+#endif // __SPI_PNX_BUS_DRIVER
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/