[PATCH 04/13] [RFC] ipath LLD core, part 1
From: Roland Dreier
Date: Fri Dec 16 2005 - 18:50:20 EST
First part of core driver
---
drivers/infiniband/hw/ipath/ipath_driver.c | 2589 ++++++++++++++++++++++++++++
1 files changed, 2589 insertions(+), 0 deletions(-)
create mode 100644 drivers/infiniband/hw/ipath/ipath_driver.c
04a2c405bc3b7f074758c4329933e9499681ccf0
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
new file mode 100644
index 0000000..df650d6
--- /dev/null
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -0,0 +1,2589 @@
+/*
+ * Copyright (c) 2003, 2004, 2005. PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * Patent licenses, if any, provided herein do not apply to
+ * combinations of this program with other software, or any other
+ * product whatsoever.
+ *
+ * $Id: ipath_driver.c 4500 2005-12-16 01:34:22Z rjwalsh $
+ */
+
+#include <linux/version.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/swap.h>
+#include <linux/sysctl.h>
+#include <asm/mtrr.h>
+#include <linux/netdevice.h>
+
+#include <linux/crc32.h> /* we can generate our own crc's for testing */
+
+#include "ipath_kernel.h"
+#include "ips_common.h"
+#include "ipath_layer.h"
+
+/*
+ * Our LSB-assigned major number, so scripts can figure
+ * out how to make entry in /dev.
+ */
+
+static int ipath_major = 233;
+
+/*
+ * number of buffers reserved for driver (layered drivers and SMA send),
+ * settable via sysctl, although it may not take effect if user
+ * processes have the port open. Reserved at end of buffer list
+ */
+
+static uint infinipath_kpiobufs = 32;
+
+/*
+ * number of ports we are configured to use (to allow for more pio
+ * buffers per port, etc.) Zero means use chip value
+ */
+
+static uint infinipath_cfgports;
+
+/*
+ * number of units we are configured to use (to allow for bringup on
+ * multi-chip systems) Zero means use only one for now, but eventually
+ * will mean to use infinipath_max
+ */
+
+static uint infinipath_cfgunits;
+
+uint64_t ipath_dummy_val_for_testing;
+
+static __kernel_pid_t ipath_sma_alive; /* PID of SMA, if it's running */
+static spinlock_t ipath_sma_lock; /* SMA receive */
+
+/* max SM received packets we'll queue; we keep the most recent packets. */
+
+#define IPATH_NUM_SMAPKTS 16
+
+#define IPATH_SMA_HDRSZ (8+12+8) /* LRH+BTH+DETH */
+
+static struct _ipath_sma_rpkt {
+ /* length of received packet; non-zero if queued */
+ uint32_t len;
+ /* unit number of interface packet was received from */
+ uint32_t unit;
+ uint8_t *buf;
+} ipath_sma_data[IPATH_NUM_SMAPKTS];
+
+static unsigned ipath_sma_first; /* oldest sma packet index */
+static unsigned ipath_sma_next; /* next sma packet index to use */
+
+/*
+ * ipath_sma_data_bufs has one extra, pointed to by ipath_sma_data_spare,
+ * so we can exchange buffers to do copy_to_user, and not hold the lock
+ * across the copy_to_user().
+ */
+
+#define SMA_MAX_PKTSZ (IPATH_SMA_HDRSZ+256) /* max len of an SMA packet */
+
+static uint8_t ipath_sma_data_bufs[IPATH_NUM_SMAPKTS + 1][SMA_MAX_PKTSZ];
+static uint8_t *ipath_sma_data_spare;
+/* sma waits globally on all units */
+static wait_queue_head_t ipath_sma_wait;
+static wait_queue_head_t ipath_sma_state_wait;
+
+struct infinipath_stats ipath_stats;
+
+static __inline__ uint64_t ipath_kget_sreg(const ipath_type, ipath_sreg)
+ __attribute__ ((always_inline));
+
+/*
+ * this will only be used for diags, now that we have enabled the DMA
+ * of the sendpioavail regs to system memory.
+ */
+
+static __inline__ uint64_t ipath_kget_sreg(const ipath_type stype,
+ ipath_sreg regno)
+{
+ uint64_t val;
+ uint64_t *sbase;
+
+ sbase = (uint64_t *) (devdata[stype].ipath_sregbase
+ + (char *)devdata[stype].ipath_kregbase);
+ val = sbase ? sbase[regno] : 0ULL;
+ return val;
+}
+
+/*
+ * make infinipath_debug, etc. changeable on the fly via sysctl.
+ */
+
+static int ipath_sysctl(ctl_table *, int, struct file *, void __user *,
+ size_t *, loff_t *);
+
+static int ipath_do_user_init(ipath_portdata *, struct ipath_user_info *);
+static int ipath_get_baseinfo(ipath_portdata *, struct ipath_base_info *);
+static int ipath_get_units(void);
+static int ipath_wr_eeprom(ipath_portdata *, struct ipath_eeprom_req *);
+static int ipath_wait_intr(ipath_portdata *, uint32_t);
+static int ipath_tid_update(ipath_portdata *, struct _tidupd *);
+static int ipath_tid_free(ipath_portdata *, struct _tidupd *);
+static int ipath_get_counters(ipath_type, struct infinipath_counters *);
+static int ipath_get_unit_counters(struct infinipath_getunitcounters *a);
+static int ipath_get_stats(struct infinipath_stats *);
+static int ipath_set_partkey(ipath_portdata *, uint16_t);
+static int ipath_manage_rcvq(ipath_portdata *, uint16_t);
+static void ipath_clean_partkey(ipath_portdata *, ipath_devdata *);
+static void ipath_disarm_piobufs(const ipath_type, unsigned, unsigned);
+static int ipath_create_user_egr(ipath_portdata *);
+static int ipath_create_port0_egr(ipath_portdata *);
+static int ipath_create_rcvhdrq(ipath_portdata *);
+static void ipath_handle_errors(const ipath_type, uint64_t);
+static void ipath_update_pio_bufs(const ipath_type);
+static __inline__ void *ipath_get_egrbuf(const ipath_type, uint32_t, int);
+static int ipath_shutdown_link(const ipath_type);
+static int ipath_bringup_link(const ipath_type);
+int ipath_bringup_serdes(const ipath_type);
+static void ipath_get_faststats(unsigned long);
+static int ipath_setup_htconfig(struct pci_dev *, uint64_t *, const ipath_type);
+static struct page *ipath_nopage(struct vm_area_struct *, unsigned long, int *);
+static irqreturn_t ipath_intr(int irq, void *devid, struct pt_regs *regs);
+static void ipath_decode_err(char *, size_t, uint64_t);
+void ipath_free_pddata(ipath_devdata *, uint32_t, int);
+static void ipath_clear_tids(const ipath_type, unsigned);
+static void ipath_get_guid(const ipath_type);
+static int ipath_sma_ioctl(struct file *, unsigned int, unsigned long);
+static int ipath_rcvsma_pkt(struct ipath_sendpkt *);
+static int ipath_kset_lid(uint32_t);
+static int ipath_kset_mlid(uint32_t);
+static int ipath_get_mlid(uint32_t *);
+static int ipath_get_devstatus(uint64_t *);
+static int ipath_kset_guid(struct ipath_setguid *);
+static int ipath_get_portinfo(uint32_t *);
+static int ipath_get_nodeinfo(uint32_t *);
+#ifdef _IPATH_EXTRA_DEBUG
+static void ipath_dump_allregs(char *, ipath_type);
+#endif
+
+static const char ipath_sma_name[] = "infinipath_SMA";
+
+/*
+ * is diags mode enabled? if it is, then things like auto bringup of
+ * links is disabled
+ */
+
+int ipath_diags_enabled = 0;
+
+void ipath_chip_done(void)
+{
+}
+
+void ipath_chip_cleanup(ipath_devdata * dd)
+{
+}
+
+/*
+ * cache aligned location
+ *
+ * where port 0 rcvhdrtail register is written back; also want
+ * nothing else sharing the cache line, so make it a cache line in size
+ * used for all units
+ *
+ * This is volatile as it's the target of a DMA from the chip.
+ */
+
+static volatile uint64_t ipath_port0_rcvhdrtail[512]
+ __attribute__ ((aligned(4096)));
+
+#define MODNAME "ipath_core"
+#define DRIVER_LOAD_MSG "PathScale " MODNAME " loaded: "
+#define PFX MODNAME ": "
+
+/*
+ * min buffers we want to have per port, after driver
+ */
+
+#define IPATH_MIN_USER_PORT_BUFCNT 8
+
+/* The size has to be longer than this string, so we can
+ * append board/chip information to it in the init code.
+ */
+static char ipath_core_version[192] = _IPATH_IDSTR "\n";
+static char *chip_driver_version;
+static int chip_driver_size;
+
+/* mylid and lidbase are to deal with LIDs in "fabric", until SM is working */
+
+module_param(infinipath_debug, uint, 0644);
+module_param(infinipath_kpiobufs, uint, 0644);
+module_param(infinipath_cfgports, uint, 0644);
+module_param(infinipath_cfgunits, uint, 0644);
+
+MODULE_PARM_DESC(infinipath_debug, "mask for debug prints");
+MODULE_PARM_DESC(infinipath_cfgports, "Set max number of ports to use");
+MODULE_PARM_DESC(infinipath_cfgunits, "Set max number of devices to use");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("PathScale <infinipath-support@xxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Pathscale InfiniPath driver");
+
+#ifdef IPATH_DIAG
+static __kernel_pid_t ipath_diag_alive; /* PID of diags, if running */
+extern int ipath_diags_ioctl(struct file *, unsigned, unsigned long);
+static int ipath_opendiag(struct inode *, struct file *);
+#endif
+
+#if __IPATH_INFO || __IPATH_DBG
+static const char *ipath_ibcstatus_str[] = {
+ "Disabled",
+ "LinkUp",
+ "PollActive",
+ "PollQuiet",
+ "SleepDelay",
+ "SleepQuiet",
+ "LState6", /* unused */
+ "LState7", /* unused */
+ "CfgDebounce",
+ "CfgRcvfCfg",
+ "CfgWaitRmt",
+ "CfgIdle",
+ "RecovRetrain",
+ "LState0xD", /* unused */
+ "RecovWaitRmt",
+ "RecovIdle",
+};
+#endif
+
+static ssize_t show_version(struct device_driver *dev, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s", ipath_core_version);
+}
+
+static ssize_t show_status(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ ipath_devdata *dd = dev_get_drvdata(dev);
+
+ if(!dd)
+ return -EINVAL;
+
+ if(!dd->ipath_statusp)
+ return -EINVAL;
+
+ return snprintf(buf, PAGE_SIZE, "%llx\n", *(dd->ipath_statusp));
+}
+
+static const char *ipath_status_str[] = {
+ "Initted",
+ "Disabled",
+ "4", /* unused */
+ "OIB_SMA",
+ "SMA",
+ "Present",
+ "IB_link_up",
+ "IB_configured",
+ "NoIBcable",
+ "Fatal_Hardware_Error",
+ NULL,
+};
+
+static ssize_t show_status_str(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ ipath_devdata *dd = dev_get_drvdata(dev);
+ int i, any;
+ uint64_t s;
+
+ if(!dd)
+ return -EINVAL;
+
+ if(!dd->ipath_statusp)
+ return -EINVAL;
+
+ s = *(dd->ipath_statusp);
+ *buf = '\0';
+ for (any = i = 0; s && ipath_status_str[i]; i++) {
+ if (s & 1) {
+ if (any && strlcat(buf, " ", PAGE_SIZE) >= PAGE_SIZE)
+ /* overflow */
+ break;
+ if (strlcat(buf, ipath_status_str[i],
+ PAGE_SIZE) >= PAGE_SIZE)
+ break;
+ any = 1;
+ }
+ s >>= 1;
+ }
+ if(any)
+ strlcat(buf, "\n", PAGE_SIZE);
+
+ return strlen(buf);
+}
+
+static ssize_t show_lid(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ ipath_devdata *dd = dev_get_drvdata(dev);
+
+ if(!dd)
+ return -EINVAL;
+
+ return snprintf(buf, PAGE_SIZE, "%x\n", dd->ipath_lid);
+}
+
+static ssize_t show_mlid(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ ipath_devdata *dd = dev_get_drvdata(dev);
+
+ if(!dd)
+ return -EINVAL;
+
+ return snprintf(buf, PAGE_SIZE, "%x\n", dd->ipath_mlid);
+}
+
+static ssize_t show_guid(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ ipath_devdata *dd = dev_get_drvdata(dev);
+ uint8_t *guid;
+
+ if(!dd)
+ return -EINVAL;
+
+ guid = (uint8_t *)&(dd->ipath_guid);
+
+ return snprintf(buf, PAGE_SIZE, "%x:%x:%x:%x:%x:%x:%x:%x\n",
+ guid[0], guid[1], guid[2], guid[3], guid[4], guid[5],
+ guid[6], guid[7]);
+}
+
+static ssize_t show_nguid(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ ipath_devdata *dd = dev_get_drvdata(dev);
+
+ if(!dd)
+ return -EINVAL;
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", dd->ipath_nguid);
+}
+
+static ssize_t show_serial(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ ipath_devdata *dd = dev_get_drvdata(dev);
+
+ if(!dd)
+ return -EINVAL;
+
+ buf[sizeof dd->ipath_serial] = '\0';
+ memcpy(buf, dd->ipath_serial, sizeof dd->ipath_serial);
+ strcat(buf, "\n");
+ return strlen(buf);
+}
+
+static ssize_t show_unit(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ ipath_devdata *dd = dev_get_drvdata(dev);
+
+ if(!dd)
+ return -EINVAL;
+
+ snprintf(buf, PAGE_SIZE, "%u\n", dd->ipath_unit);
+ return strlen(buf);
+}
+
+static DRIVER_ATTR(version, S_IRUGO, show_version, NULL);
+static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
+static DEVICE_ATTR(status_str, S_IRUGO, show_status_str, NULL);
+static DEVICE_ATTR(lid, S_IRUGO, show_lid, NULL);
+static DEVICE_ATTR(mlid, S_IRUGO, show_mlid, NULL);
+static DEVICE_ATTR(guid, S_IRUGO, show_guid, NULL);
+static DEVICE_ATTR(nguid, S_IRUGO, show_nguid, NULL);
+static DEVICE_ATTR(serial, S_IRUGO, show_serial, NULL);
+static DEVICE_ATTR(unit, S_IRUGO, show_unit, NULL);
+
+/*
+ * Much like proc_dointvec_minmax, but only one int, and show as 0x on read
+ * Apparently between 2.6.3 and 2.6.10, convenience functions were added
+ * that I should probably convert to using. For now, do the minimum possible
+ * change, using the new ppos parameter, instead of f_pos
+ */
+
+static int ipath_sysctl(ctl_table * ct, int wr, struct file *f, void __user * b,
+ size_t * l, loff_t * ppos)
+{
+ char t[20];
+ int len, ret = 0;
+
+ if (*ppos && !wr)
+ *l = 0;
+ if (!*l)
+ goto done;
+ if (!access_ok(wr ? VERIFY_READ : VERIFY_WRITE, b, *l)) {
+ ret = -EFAULT;
+ goto done;
+ }
+ len = min_t(int, sizeof t, *l);
+
+ if (!wr) {
+ /* All of our changeable sysctl stuff is unsigned's for now */
+ *l = snprintf(t, len, "%x\n", *(unsigned *)ct->data);
+ if (*l < 0)
+ *l = 0;
+ else
+ copy_to_user(b, t, *l);
+ } else {
+ int i;
+ char *e;
+ if (copy_from_user(t, b, len)) {
+ ret = -EFAULT;
+ goto done;
+ }
+ t[len < (sizeof t - 1) ? len : (sizeof t - 1)] = '\0';
+ i = simple_strtoul(t, &e, 0);
+ if (e > t) {
+ /*
+ * All of our changeable sysctl stuff is
+ * unsigned's for now
+ */
+ if (ct->ctl_name == CTL_INFINIPATH_LAYERBUF) {
+ /* we don't need locking for this,
+ * because we still do the normal avail
+ * checks, it's just a question of what
+ * range we check within; at best
+ * during the update, we miss checking
+ * some buffers we could have used,
+ * for a short period
+ */
+
+ int d;
+
+ if (i < 1) {
+ _IPATH_ERROR
+ ("Must have at least one kernel PIO buffer\n");
+ ret = -EINVAL;
+ goto done;
+ }
+ for (d = 0; d < infinipath_max; d++) {
+ if (devdata[d].ipath_kregbase) {
+ if (i >
+ (devdata[d].ipath_piobcnt -
+ (devdata[d].
+ ipath_cfgports *
+ IPATH_MIN_USER_PORT_BUFCNT)))
+ {
+ _IPATH_UNIT_ERROR(d,
+ "Allocating %d PIO bufs for kernel leaves too few for %d user ports (%d each)\n",
+ i,
+ devdata
+ [d].
+ ipath_cfgports
+ - 1,
+ IPATH_MIN_USER_PORT_BUFCNT);
+ ret = -EINVAL;
+ goto done;
+ }
+ devdata[d].ipath_lastport_piobuf =
+ devdata[d].ipath_piobcnt - i;
+ devdata[d].ipath_lastpioindex =
+ devdata[d].ipath_lastport_piobuf;
+ }
+ }
+ }
+ *(unsigned *)ct->data = i;
+ } else {
+ ret = -EINVAL;
+ goto done;
+ }
+ *l = len;
+ }
+done:
+
+ *ppos += *l;
+ return ret;
+}
+
+/*
+ * make infinipath_debug changeable on the fly via sysctl.
+ */
+
+static struct ctl_table_header *ipath_ctl_header;
+
+static ctl_table ipath_ctl_debug[] = {
+ {
+ .ctl_name = CTL_INFINIPATH_DEBUG,
+ .procname = "debug",
+ .data = &infinipath_debug,
+ .maxlen = sizeof(infinipath_debug),
+ .mode = 0644,
+ .proc_handler = ipath_sysctl,
+ }
+ ,
+ {
+ .ctl_name = CTL_INFINIPATH_LAYERBUF,
+ .procname = "kern_piobufs",
+ .data = &infinipath_kpiobufs,
+ .maxlen = sizeof(infinipath_kpiobufs),
+ .mode = 0644,
+ .proc_handler = ipath_sysctl,
+ }
+ ,
+ {.ctl_name = 0}
+};
+
+static ctl_table ipath_ctl[] = {
+ {
+ .ctl_name = CTL_INFINIPATH,
+ .procname = "infinipath",
+ .mode = 0555,
+ .child = ipath_ctl_debug,
+ },
+ {.ctl_name = 0}
+};
+
+/*
+ * called from add_timer and user counter read calls, to deal with
+ * counters that wrap in "human time". The words sent and received, and
+ * the packets sent and received are all that we worry about. For now,
+ * at least, we don't worry about error counters, because if they wrap
+ * that quickly, we probably don't care. We may eventually just make this
+ * handle all the counters. word counters can wrap in about 20 seconds
+ * of full bandwidth traffic, packet counters in a few hours.
+ */
+
+uint64_t ipath_snap_cntr(const ipath_type t, ipath_creg creg)
+{
+ uint32_t val;
+ uint64_t val64, t0, t1;
+ ipath_devdata *dd = &devdata[t];
+ static uint64_t one_sec_in_cycles;
+ extern uint32_t _ipath_pico_per_cycle;
+
+ if (!one_sec_in_cycles && _ipath_pico_per_cycle)
+ one_sec_in_cycles = 1000000000000UL / _ipath_pico_per_cycle;
+
+ t0 = get_cycles();
+ val = ipath_kget_creg32(t, creg);
+ t1 = get_cycles();
+ if ((t1 - t0) > one_sec_in_cycles && val == ~0) {
+ /*
+ * This is just a way to detect things that are quite broken.
+ * Normally this should take just a few cycles (the check is
+ * for long enough that we don't care if we get pre-empted.)
+ * An Opteron HT O read timeout is 4 seconds with normal
+ * NB values
+ */
+
+ _IPATH_UNIT_ERROR(t, "Error! Reading counter 0x%x timed out\n",
+ creg);
+ return 0ULL;
+ }
+
+ if (creg == cr_wordsendcnt) {
+ if (val != dd->ipath_lastsword) {
+ dd->ipath_sword += val - dd->ipath_lastsword;
+ dd->ipath_lastsword = val;
+ }
+ val64 = dd->ipath_sword;
+ } else if (creg == cr_wordrcvcnt) {
+ if (val != dd->ipath_lastrword) {
+ dd->ipath_rword += val - dd->ipath_lastrword;
+ dd->ipath_lastrword = val;
+ }
+ val64 = dd->ipath_rword;
+ } else if (creg == cr_pktsendcnt) {
+ if (val != dd->ipath_lastspkts) {
+ dd->ipath_spkts += val - dd->ipath_lastspkts;
+ dd->ipath_lastspkts = val;
+ }
+ val64 = dd->ipath_spkts;
+ } else if (creg == cr_pktrcvcnt) {
+ if (val != dd->ipath_lastrpkts) {
+ dd->ipath_rpkts += val - dd->ipath_lastrpkts;
+ dd->ipath_lastrpkts = val;
+ }
+ val64 = dd->ipath_rpkts;
+ } else
+ val64 = (uint64_t) val;
+
+ return val64;
+}
+
+/*
+ * print the delta of egrfull/hdrqfull errors for kernel ports no more
+ * than every 5 seconds. User processes are printed at close, but kernel
+ * doesn't close, so... Separate routine so may call from other places
+ * someday, and so function name when printed by _IPATH_INFO is meaningfull
+ */
+
+static void ipath_qcheck(const ipath_type t)
+{
+ static uint64_t last_tot_hdrqfull;
+ size_t blen = 0;
+ ipath_devdata *dd = &devdata[t];
+ char buf[128];
+
+ *buf = 0;
+ if (dd->ipath_pd[0]->port_hdrqfull != dd->ipath_p0_hdrqfull) {
+ blen = snprintf(buf, sizeof buf, "port 0 hdrqfull %u",
+ dd->ipath_pd[0]->port_hdrqfull -
+ dd->ipath_p0_hdrqfull);
+ dd->ipath_p0_hdrqfull = dd->ipath_pd[0]->port_hdrqfull;
+ }
+ if (ipath_stats.sps_etidfull != dd->ipath_last_tidfull) {
+ blen +=
+ snprintf(buf + blen, sizeof buf - blen, "%srcvegrfull %llu",
+ blen ? ", " : "",
+ ipath_stats.sps_etidfull - dd->ipath_last_tidfull);
+ dd->ipath_last_tidfull = ipath_stats.sps_etidfull;
+ }
+
+ /*
+ * this is actually the number of hdrq full interrupts, not actual
+ * events, but at the moment that's mostly what I'm interested in.
+ * Actual count, etc. is in the counters, if needed. For production
+ * users this won't ordinarily be printed.
+ */
+
+ if ((infinipath_debug & (__IPATH_PKTDBG | __IPATH_DBG)) &&
+ ipath_stats.sps_hdrqfull != last_tot_hdrqfull) {
+ blen +=
+ snprintf(buf + blen, sizeof buf - blen,
+ "%shdrqfull %llu (all ports)", blen ? ", " : "",
+ ipath_stats.sps_hdrqfull - last_tot_hdrqfull);
+ last_tot_hdrqfull = ipath_stats.sps_hdrqfull;
+ }
+ if (blen)
+ _IPATH_DBG("%s\n", buf);
+
+ if(*dd->ipath_hdrqtailptr != dd->ipath_port0head) {
+ if(dd->ipath_lastport0rcv_cnt == ipath_stats.sps_port0pkts) {
+ _IPATH_PDBG("missing rcv interrupts? port0 hd=%llx tl=%x; port0pkts %llx\n",
+ *dd->ipath_hdrqtailptr, dd->ipath_port0head,ipath_stats.sps_port0pkts);
+ ipath_kreceive(t);
+ }
+ dd->ipath_lastport0rcv_cnt = ipath_stats.sps_port0pkts;
+ }
+}
+
+/*
+ * called from add_timer to get word counters from chip before they
+ * can overflow
+ */
+
+static void ipath_get_faststats(unsigned long t)
+{
+ uint32_t val;
+ ipath_devdata *dd = &devdata[t];
+ static unsigned cnt;
+
+ /*
+ * don't access the chip while running diags, or memory diags
+ * can fail
+ */
+ if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT) ||
+ ipath_diags_enabled) {
+ /* but re-arm the timer, for diags case; won't hurt other */
+ goto done;
+ }
+
+ ipath_snap_cntr((ipath_type) t, cr_wordsendcnt);
+ ipath_snap_cntr((ipath_type) t, cr_wordrcvcnt);
+ ipath_snap_cntr((ipath_type) t, cr_pktsendcnt);
+ ipath_snap_cntr((ipath_type) t, cr_pktrcvcnt);
+
+ ipath_qcheck(t);
+
+ /*
+ * deal with repeat error suppression. Doesn't really matter if
+ * last error was almost a full interval ago, or just a few usecs
+ * ago; still won't get more than 2 per interval. We may want
+ * longer intervals for this eventually, could do with mod, counter
+ * or separate timer. Also see code in ipath_handle_errors() and
+ * ipath_handle_hwerrors().
+ */
+
+ if (dd->ipath_lasterror)
+ dd->ipath_lasterror = 0;
+ if (dd->ipath_lasthwerror)
+ dd->ipath_lasthwerror = 0;
+ if ((devdata[t].ipath_maskederrs & ~devdata[t].ipath_ignorederrs)
+ && get_cycles() > devdata[t].ipath_unmasktime) {
+ char ebuf[256];
+ ipath_decode_err(ebuf, sizeof ebuf,
+ (devdata[t].ipath_maskederrs & ~devdata[t].
+ ipath_ignorederrs));
+ if ((devdata[t].ipath_maskederrs & ~devdata[t].
+ ipath_ignorederrs)
+ & ~(INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL)) {
+ _IPATH_UNIT_ERROR(t, "Re-enabling masked errors (%s)\n",
+ ebuf);
+ } else {
+ /*
+ * rcvegrfull and rcvhdrqfull are "normal",
+ * for some types of processes (mostly benchmarks)
+ * that send huge numbers of messages, while
+ * not processing them. So only complain about
+ * these at debug level.
+ */
+ _IPATH_DBG
+ ("Disabling frequent queue full errors (%s)\n",
+ ebuf);
+ }
+ devdata[t].ipath_maskederrs = devdata[t].ipath_ignorederrs;
+ ipath_kput_kreg(t, kr_errormask, ~devdata[t].ipath_maskederrs);
+ }
+
+ if (dd->ipath_flags & IPATH_LINK_SLEEPING) {
+ uint64_t ibc;
+ _IPATH_VDBG("linkinitcmd SLEEP, move to POLL\n");
+ dd->ipath_flags &= ~IPATH_LINK_SLEEPING;
+ ibc = dd->ipath_ibcctrl;
+ /*
+ * don't put linkinitcmd in ipath_ibcctrl, want that to
+ * stay a NOP
+ */
+ ibc |=
+ INFINIPATH_IBCC_LINKINITCMD_POLL <<
+ INFINIPATH_IBCC_LINKINITCMD_SHIFT;
+ ipath_kput_kreg(t, kr_ibcctrl, ibc);
+ }
+
+ /* limit qfull messages to ~one per minute per port */
+ if ((++cnt & 0x10)) {
+ for (val = devdata[t].ipath_cfgports - 1; ((int)val) >= 0;
+ val--) {
+ if (dd->ipath_lastegrheads[val] != ~0)
+ dd->ipath_lastegrheads[val] = ~0;
+ if (dd->ipath_lastrcvhdrqtails[val] != ~0)
+ dd->ipath_lastrcvhdrqtails[val] = ~0;
+ }
+ }
+
+ if(dd->ipath_nosma_bufs) {
+ dd->ipath_nosma_secs += 5;
+ if(dd->ipath_nosma_secs >= 30) {
+ _IPATH_SMADBG("No SMA bufs avail %u seconds; cancelling pending sends\n",
+ dd->ipath_nosma_secs);
+ ipath_disarm_piobufs(t, dd->ipath_lastport_piobuf,
+ dd->ipath_piobcnt - dd->ipath_lastport_piobuf);
+ dd->ipath_nosma_secs = 0; /* start again, if necessary */
+ }
+ else
+ _IPATH_SMADBG("No SMA bufs avail %u tries, after %u seconds\n",
+ dd->ipath_nosma_bufs, dd->ipath_nosma_secs);
+ }
+
+done:
+ mod_timer(&dd->ipath_stats_timer, jiffies + HZ * 5);
+}
+
+
+static void __devexit infinipath_remove_one(struct pci_dev *);
+static int infinipath_init_one(struct pci_dev *, const struct pci_device_id *);
+
+const struct pci_device_id infinipath_pci_tbl[] = {
+ {
+ PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_PATHSCALE_INFINIPATH2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {0,}
+};
+
+MODULE_DEVICE_TABLE(pci, infinipath_pci_tbl);
+
+static struct pci_driver infinipath_driver = {
+ .name = MODNAME,
+ .driver.owner = THIS_MODULE,
+ .probe = infinipath_init_one,
+ .remove = __devexit_p(infinipath_remove_one),
+ .id_table = infinipath_pci_tbl,
+};
+
+#if defined (pgprot_writecombine) && defined(_PAGE_MA_WC)
+int remap_area_pages(unsigned long address, unsigned long phys_addr,
+ unsigned long size, unsigned long flags);
+#endif
+
+static int infinipath_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int ret, len, j;
+ static int chip_idx = -1;
+ unsigned long addr;
+ uint64_t pioaddr, piolen, intconfig;
+ uint8_t rev;
+ ipath_type dev;
+
+ /*
+ * XXX: Right now, we have a hardcoded array of devices. We'll
+ * change this in a future release, but not just yet. For the
+ * moment, we're limited to 4 infinipath devices per system.
+ */
+
+ dev = ++chip_idx;
+
+ _IPATH_VDBG("initializing unit #%u\n", dev);
+ if ((!infinipath_cfgunits && (dev >= 1)) ||
+ (infinipath_cfgunits && (dev >= infinipath_cfgunits)) ||
+ (dev >= infinipath_max)) {
+ _IPATH_ERROR("Trying to initialize unit %u, max is %u\n",
+ dev, infinipath_max - 1);
+ return -EINVAL;
+ }
+
+ devdata[dev].pci_registered = 1;
+ devdata[dev].ipath_unit = dev;
+
+ if ((ret = pci_enable_device(pdev))) {
+ _IPATH_DBG("pci_enable unit %u failed: %x\n", dev, ret);
+ }
+
+ if ((ret = pci_request_regions(pdev, MODNAME)))
+ _IPATH_INFO("pci_request_regions unit %u fails: %d\n", dev,
+ ret);
+
+ if ((ret = pci_set_dma_mask(pdev, DMA_64BIT_MASK)) != 0)
+ _IPATH_INFO("pci_set_dma_mask unit %u fails: %d\n", dev, ret);
+
+ pci_set_master(pdev); /* probably not be needed for HT */
+
+ addr = pci_resource_start(pdev, 0);
+ len = pci_resource_len(pdev, 0);
+ _IPATH_VDBG
+ ("regbase (0) %lx len %d irq %x, vend %x/%x driver_data %lx\n",
+ addr, len, pdev->irq, ent->vendor, ent->device, ent->driver_data);
+ devdata[dev].ipath_deviceid = ent->device; /* save for later use */
+ devdata[dev].ipath_vendorid = ent->vendor;
+ for (j = 0; j < 6; j++) {
+ if (!pdev->resource[j].start)
+ continue;
+ _IPATH_VDBG("BAR %d start %lx, end %lx, len %lx\n",
+ j, pdev->resource[j].start,
+ pdev->resource[j].end, pci_resource_len(pdev, j));
+ }
+
+ if (!addr) {
+ _IPATH_UNIT_ERROR(dev, "No valid address in BAR 0!\n");
+ return -ENODEV;
+ }
+
+ if ((ret = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev))) {
+ _IPATH_UNIT_ERROR(dev,
+ "Failed to read PCI revision ID unit %u: %d\n",
+ dev, ret);
+ return ret; /* shouldn't ever happen */
+ } else
+ devdata[dev].ipath_pcirev = rev;
+
+ devdata[dev].ipath_kregbase = ioremap_nocache(addr, len);
+#if defined (pgprot_writecombine) && defined(_PAGE_MA_WC)
+ printk("Remapping pages WC\n");
+ remap_area_pages((u64) devdata[dev].ipath_kregbase + 1024 * 1024,
+ addr + 1024 * 1024, 1024 * 1024, _PAGE_MA_WC);
+ /* devdata[dev].ipath_kregbase = __ioremap(addr, len, _PAGE_MA_WC); */
+#endif
+
+ if (!devdata[dev].ipath_kregbase) {
+ _IPATH_DBG("Unable to map io addr %lx to kvirt, failing\n",
+ addr);
+ ret = -ENOMEM;
+ goto fail;
+ }
+ devdata[dev].ipath_kregend =
+ (uint64_t *) ((void *)devdata[dev].ipath_kregbase + len);
+ devdata[dev].ipath_physaddr = addr; /* used for io_remap, etc. */
+ /* for user mmap */
+ devdata[dev].ipath_kregvirt = phys_to_virt(addr);
+ _IPATH_VDBG("mapped io addr %lx to kregbase %p kregvirt %p\n", addr,
+ devdata[dev].ipath_kregbase, devdata[dev].ipath_kregvirt);
+
+ /*
+ * set these up before registering the interrupt handler, just
+ * in case
+ */
+ devdata[dev].pcidev = pdev;
+ pci_set_drvdata(pdev, &(devdata[dev]));
+
+ /*
+ * set up our interrupt handler; SA_SHIRQ probably not needed,
+ * but won't hurt for now.
+ */
+
+ if (!pdev->irq) {
+ _IPATH_UNIT_ERROR(dev, "irq is 0, failing init\n");
+ ret = -EINVAL;
+ goto fail;
+ }
+ if ((ret = request_irq(pdev->irq, ipath_intr,
+ SA_SHIRQ, MODNAME, &devdata[dev]))) {
+ _IPATH_UNIT_ERROR(dev,
+ "Couldn't setup interrupt handler, irq=%u: %d\n",
+ pdev->irq, ret);
+ goto fail;
+ }
+
+ /*
+ * clear ipath_flags here instead of in ipath_init_chip as it is set
+ * by ipath_setup_htconfig.
+ */
+ devdata[dev].ipath_flags = 0;
+ if (ipath_setup_htconfig(pdev, &intconfig, dev))
+ _IPATH_DBG
+ ("Failed to setup HT config, continuing anyway for now\n");
+
+ ret = ipath_init_chip(dev); /* do the chip-specific init */
+ if (!ret) {
+#ifdef CONFIG_MTRR
+ unsigned bits;
+ /*
+ * Set the PIO buffers to be WCCOMB, so we get HT bursts
+ * to the chip. Linux (possibly the hardware) requires
+ * it to be on a power of 2 address matching the length
+ * (which has to be a power of 2). For rev1, that means
+ * the base address, for rev2, it will be just the PIO
+ * buffers themselves.
+ */
+ pioaddr = addr + devdata[dev].ipath_piobufbase;
+ piolen = devdata[dev].ipath_piobcnt *
+ round_up(devdata[dev].ipath_piosize,
+ devdata[dev].ipath_palign);
+
+ for (bits = 0; !(piolen & (1ULL << bits)); bits++) ;
+ if (piolen != (1ULL << bits)) {
+ _IPATH_DBG("piolen 0x%llx not power of 2, bits=%u\n",
+ piolen, bits);
+ piolen >>= bits;
+ while (piolen >>= 1)
+ bits++;
+ piolen = 1ULL << (bits + 1);
+ _IPATH_DBG("Changed piolen to 0x%llx bits=%u\n", piolen,
+ bits);
+ }
+ if (pioaddr & (piolen - 1)) {
+ uint64_t atmp;
+ _IPATH_DBG
+ ("pioaddr %llx not on right boundary for size %llx, fixing\n",
+ pioaddr, piolen);
+ atmp = pioaddr & ~(piolen - 1);
+ if (atmp < addr || (atmp + piolen) > (addr + len)) {
+ _IPATH_UNIT_ERROR(dev,
+ "No way to align address/size (%llx/%llx), no WC mtrr\n",
+ atmp, piolen << 1);
+ ret = -ENODEV;
+ } else {
+ _IPATH_DBG
+ ("changing WC base from %llx to %llx, len from %llx to %llx\n",
+ pioaddr, atmp, piolen, piolen << 1);
+ pioaddr = atmp;
+ piolen <<= 1;
+ }
+ }
+
+ if (!ret) {
+ int cookie;
+ _IPATH_VDBG
+ ("Setting mtrr for chip to WC (addr %llx, len=0x%llx)\n",
+ pioaddr, piolen);
+ cookie = mtrr_add(pioaddr, piolen, MTRR_TYPE_WRCOMB, 0);
+ if (cookie < 0) {
+ _IPATH_INFO
+ ("mtrr_add(%llx,0x%llx,WC,0) failed (%d)\n",
+ pioaddr, piolen, cookie);
+ ret = -EINVAL;
+ } else {
+ _IPATH_VDBG
+ ("Set mtrr for chip to WC, cookie is %d\n",
+ cookie);
+ devdata[dev].ipath_mtrr = (uint32_t) cookie;
+ }
+ }
+#endif /* CONFIG_MTRR */
+ }
+
+ if (!ret && devdata[dev].ipath_kregbase && (devdata[dev].ipath_flags
+ & IPATH_PRESENT)) {
+ /*
+ * for the hardware, enable interrupts only after
+ * kr_interruptconfig is written, if we could set it up
+ */
+ if (intconfig) {
+ /* interrupt address */
+ ipath_kput_kreg(dev, kr_interruptconfig, intconfig);
+ /* enable all interrupts */
+ ipath_kput_kreg(dev, kr_intmask, ~0ULL);
+ /* force re-interrupt of any pending interrupts. */
+ ipath_kput_kreg(dev, kr_intclear, 0ULL);
+ /* OK, the chip is usable, marked it as initialized */
+ *devdata[dev].ipath_statusp |= IPATH_STATUS_INITTED;
+ } else
+ _IPATH_UNIT_ERROR(dev,
+ "No interrupts enabled, couldn't setup interrupt address\n");
+ } else if(ret != -EPERM)
+ _IPATH_INFO("Not configuring unit %u interrupts, init failed\n",
+ dev);
+
+ device_create_file(&(pdev->dev), &dev_attr_status);
+ device_create_file(&(pdev->dev), &dev_attr_status_str);
+ device_create_file(&(pdev->dev), &dev_attr_lid);
+ device_create_file(&(pdev->dev), &dev_attr_mlid);
+ device_create_file(&(pdev->dev), &dev_attr_guid);
+ device_create_file(&(pdev->dev), &dev_attr_nguid);
+ device_create_file(&(pdev->dev), &dev_attr_serial);
+ device_create_file(&(pdev->dev), &dev_attr_unit);
+
+ /*
+ * We used to cleanup here, with pci_release_regions, etc. but that
+ * can cause other problems if we want to run diags, etc., so instead
+ * defer that until driver unload.
+ */
+
+fail: /* after we've done at least some of the pci setup */
+ if(ret == -EPERM) /* disabled device, don't want module load error;
+ * just want to carry status through to this point */
+ ret = 0;
+
+ return ret;
+}
+
+
+
+#define HT_CAPABILITY_ID 0x08 /* HT capabilities not defined in kernel */
+#define HT_INTR_DISC_CONFIG 0x80 /* HT interrupt and discovery cap */
+#define HT_INTR_REG_INDEX 2 /* intconfig requires indirect accesses */
+
+/*
+ * setup the interruptconfig register from the HT config info.
+ * Also clear CRC errors in HT linkcontrol, if necessary.
+ * This is done only for the real hardware. It is done before
+ * chip address space is initted, so can't touch infinipath registers
+ */
+
+static int ipath_setup_htconfig(struct pci_dev *pdev, uint64_t * iaddr,
+ const ipath_type t)
+{
+ uint8_t cap_type;
+ uint32_t int_handler_addr_lower;
+ uint32_t int_handler_addr_upper;
+ uint64_t ihandler = 0;
+ int i, pos, ret = 0;
+
+ *iaddr = 0ULL; /* init to zero in case not able to configure */
+
+ /*
+ * Read the capability info to find the interrupt info, and also
+ * handle clearing CRC errors in linkctrl register if necessary.
+ * We do this early, before we ever enable errors or hardware errors,
+ * mostly to avoid causing the chip to enter freeze mode.
+ */
+ if(!(pos = pci_find_capability(pdev, HT_CAPABILITY_ID))) {
+ _IPATH_UNIT_ERROR(t,
+ "Couldn't find HyperTransport capability; no interrupts\n");
+ return -ENODEV;
+ }
+ do {
+ /* the HT capability type byte is 3 bytes after the
+ * capability byte.
+ */
+ if(pci_read_config_byte(pdev, pos+3, &cap_type)) {
+ _IPATH_INFO
+ ("Couldn't read config command @ %d\n", pos);
+ continue;
+ }
+ if(!(cap_type & 0xE0)) {
+ /* bits 13-15 of command==0 is slave/primary block.
+ * Clear any HT CRC errors. We only bother to
+ * do this at load time, because it's OK if it
+ * happened before we were loaded (first time
+ * after boot/reset), but any time after that,
+ * it's fatal anyway. Also need to not check for
+ * for upper byte errors if we are in 8 bit mode,
+ * so figure out our width. For now, at least,
+ * also complain if it's 8 bit.
+ */
+ uint8_t linkwidth = 0, linkerr, link_a_b_off, link_off;
+ uint16_t linkctrl = 0;
+
+ devdata[t].ipath_ht_slave_off = pos;
+ /* command word, master_host bit */
+ if((cap_type >> 2) & 1) /* master host || slave */
+ link_a_b_off = 4;
+ else
+ link_a_b_off = 0;
+ _IPATH_VDBG("HT%u (Link %c) connected to processor\n",
+ link_a_b_off ? 1 : 0,
+ link_a_b_off ? 'B' : 'A');
+
+ link_a_b_off += pos;
+
+ /*
+ * check both link control registers; clear both
+ * HT CRC sets if necessary.
+ */
+
+ for (i = 0; i < 2; i++) {
+ link_off = pos + i * 4 + 0x4;
+ if (pci_read_config_word
+ (pdev, link_off, &linkctrl))
+ _IPATH_UNIT_ERROR(t,
+ "Couldn't read HT link control%d register\n",
+ i);
+ else if (linkctrl & (0xf << 8)) {
+ _IPATH_VDBG
+ ("Clear linkctrl%d CRC Error bits %x\n",
+ i, linkctrl & (0xf << 8));
+ /*
+ * now write them back to clear
+ * the error.
+ */
+ pci_write_config_byte(pdev, link_off,
+ linkctrl & (0xf <<
+ 8));
+ }
+ }
+
+ /*
+ * As with HT CRC bits, same for protocol errors
+ * that might occur during boot.
+ */
+
+ for (i = 0; i < 2; i++) {
+ link_off = pos + i * 4 + 0xd;
+ if (pci_read_config_byte
+ (pdev, link_off, &linkerr))
+ _IPATH_INFO
+ ("Couldn't read linkerror%d of HT slave/primary block\n",
+ i);
+ else if (linkerr & 0xf0) {
+ _IPATH_VDBG
+ ("HT linkerr%d bits 0x%x set, clearing\n",
+ linkerr >> 4, i);
+ /*
+ * writing the linkerr bits that
+ * are set will clear them
+ */
+ if (pci_write_config_byte
+ (pdev, link_off, linkerr))
+ _IPATH_DBG
+ ("Failed write to clear HT linkerror%d\n",
+ i);
+ if (pci_read_config_byte
+ (pdev, link_off, &linkerr))
+ _IPATH_INFO
+ ("Couldn't reread linkerror%d of HT slave/primary block\n",
+ i);
+ else if (linkerr & 0xf0)
+ _IPATH_INFO
+ ("HT linkerror%d bits 0x%x couldn't be cleared\n",
+ i, linkerr >> 4);
+ }
+ }
+
+ /*
+ * this is just for our link to the host, not
+ * devices connected through tunnel.
+ */
+
+ if (pci_read_config_byte
+ (pdev, link_a_b_off + 7, &linkwidth))
+ _IPATH_UNIT_ERROR(t,
+ "Couldn't read HT link width config register\n");
+ else {
+ uint32_t width;
+ switch (linkwidth & 7) {
+ case 5:
+ width = 4;
+ break;
+ case 4:
+ width = 2;
+ break;
+ case 3:
+ width = 32;
+ break;
+ case 1:
+ width = 16;
+ break;
+ case 0:
+ default: /* if wrong, assume 8 bit */
+ width = 8;
+ break;
+ }
+ ((ipath_devdata *) pci_get_drvdata(pdev))->
+ ipath_htwidth = width;
+
+ if (linkwidth != 0x11) {
+ _IPATH_UNIT_ERROR(t,
+ "Not configured for 16 bit HT (%x)\n",
+ linkwidth);
+ if (!(linkwidth & 0xf)) {
+ _IPATH_DBG
+ ("Will ignore HT lane1 errors\n");
+ ((ipath_devdata *)
+ pci_get_drvdata(pdev))->
+ ipath_flags |= IPATH_8BIT_IN_HT0;
+ }
+ }
+ }
+
+ /*
+ * this is just for our link to the host, not
+ * devices connected through tunnel.
+ */
+
+ if (pci_read_config_byte
+ (pdev, link_a_b_off + 0xd, &linkwidth))
+ _IPATH_UNIT_ERROR(t,
+ "Couldn't read HT link frequency config register\n");
+ else {
+ uint32_t speed;
+ switch (linkwidth & 0xf) {
+ case 6:
+ speed = 1000;
+ break;
+ case 5:
+ speed = 800;
+ break;
+ case 4:
+ speed = 600;
+ break;
+ case 3:
+ speed = 500;
+ break;
+ case 2:
+ speed = 400;
+ break;
+ case 1:
+ speed = 300;
+ break;
+ default:
+ /*
+ * assume reserved and
+ * vendor-specific are 200...
+ */
+ case 0:
+ speed = 200;
+ break;
+ }
+ ((ipath_devdata *) pci_get_drvdata(pdev))->
+ ipath_htspeed = speed;
+ }
+ } else if (cap_type == HT_INTR_DISC_CONFIG) {
+ /* use indirection register to get the intr handler */
+ uint32_t intvec;
+ pci_write_config_byte(pdev, pos + HT_INTR_REG_INDEX,
+ 0x10);
+ pci_read_config_dword(pdev, pos + 4,
+ &int_handler_addr_lower);
+
+ pci_write_config_byte(pdev, pos + HT_INTR_REG_INDEX,
+ 0x11);
+ pci_read_config_dword(pdev, pos + 4,
+ &int_handler_addr_upper);
+
+ ihandler = (uint64_t) int_handler_addr_lower |
+ ((uint64_t) int_handler_addr_upper << 32);
+
+ /*
+ * I'm unable to find an exported API to get
+ * the the actual vector, either from the PCI
+ * infrastructure, or from the APIC
+ * infrastructure. This heuristic seems to be
+ * valid for Opteron on 2.6.x kernels, for irq's > 2.
+ * It may not be universally true... Bug 2338
+ *
+ * Oh well; the heuristic doesn't work for the
+ * AMI/Iwill BIOS... But the good news is,
+ * somewhere by 2.6.9, when CONFIG_PCI_MSI is
+ * enabled, the irq field actually turned into
+ * the vector number
+ * We therefore require that MSI be enabled...
+ */
+
+ intvec = pdev->irq;
+ /*
+ * clear any bits there; normally not set but
+ * we'll overload this for some debug purposes
+ * (setting the HTC debug register value from
+ * software, rather than GPIOs), so it might be
+ * set on a driver reload.
+ */
+
+ ihandler &= ~0xff0000;
+ /* x86 vector goes in intrinfo[23:16] */
+ ihandler |= intvec << 16;
+ _IPATH_VDBG
+ ("ihandler lower %x, upper %x, intvec %x, interruptconfig %llx\n",
+ int_handler_addr_lower, int_handler_addr_upper,
+ intvec, ihandler);
+
+ /* return to caller, can't program yet. */
+ *iaddr = ihandler;
+ /*
+ * no break, have to be sure we find link control
+ * stuff also
+ */
+ }
+
+ } while((pos=pci_find_next_capability(pdev, pos, HT_CAPABILITY_ID)));
+
+ if (!ihandler) {
+ _IPATH_UNIT_ERROR(t,
+ "Couldn't find interrupt handler in config space\n");
+ ret = -ENODEV;
+ }
+ return ret;
+}
+
+/*
+ * get the GUID from the i2c device
+ * When we add the multi-chip support, we will probably have to add
+ * the ability to use the number of guids field, and get the guid from
+ * the first chip's flash, to use for all of them.
+ */
+
+static void ipath_get_guid(const ipath_type t)
+{
+ void *buf;
+ struct ipath_flash *ifp;
+ uint64_t guid;
+ int len;
+ uint8_t csum, *bguid;
+
+ if (t && devdata[0].ipath_nguid > 1 && t <= devdata[0].ipath_nguid) {
+ uint8_t oguid;
+ devdata[t].ipath_guid = devdata[0].ipath_guid;
+ bguid = (uint8_t *) & devdata[t].ipath_guid;
+
+ oguid = bguid[7];
+ bguid[7] += t;
+ if (oguid > bguid[7]) {
+ if (bguid[6] == 0xff) {
+ if (bguid[5] == 0xff) {
+ _IPATH_UNIT_ERROR(t,
+ "Can't set %s GUID from base GUID, wraps to OUI!\n",
+ ipath_get_unit_name
+ (t));
+ devdata[t].ipath_guid = 0;
+ return;
+ }
+ bguid[5]++;
+ }
+ bguid[6]++;
+ }
+ devdata[t].ipath_nguid = 1;
+
+ _IPATH_DBG
+ ("nguid %u, so adding %u to device 0 guid, for %llx (big-endian)\n",
+ devdata[0].ipath_nguid, t, devdata[t].ipath_guid);
+ return;
+ }
+
+ len = offsetof(struct ipath_flash, if_future);
+ if (!(buf = vmalloc(len))) {
+ _IPATH_UNIT_ERROR(t,
+ "Couldn't allocate memory to read %u bytes from eeprom for GUID\n",
+ len);
+ return;
+ }
+
+ if (ipath_eeprom_read(t, 0, buf, len)) {
+ _IPATH_UNIT_ERROR(t, "Failed reading GUID from eeprom\n");
+ goto done;
+ }
+ ifp = (struct ipath_flash *)buf;
+
+ csum = ipath_flash_csum(ifp, 0);
+ if (csum != ifp->if_csum) {
+ _IPATH_INFO("Bad I2C flash checksum: 0x%x, not 0x%x\n",
+ csum, ifp->if_csum);
+ goto done;
+ }
+ if (*(uint64_t *) ifp->if_guid == 0ULL
+ || *(uint64_t *) ifp->if_guid == ~0ULL) {
+ _IPATH_UNIT_ERROR(t, "Invalid GUID %llx from flash; ignoring\n",
+ *(uint64_t *) ifp->if_guid);
+ goto done; /* don't allow GUID if all 0 or all 1's */
+ }
+
+ /* complain, but allow it */
+ if (*(uint64_t *) ifp->if_guid == 0x100007511000000)
+ _IPATH_INFO
+ ("Warning, GUID %llx is default, probabaly not correct!\n",
+ *(uint64_t *) ifp->if_guid);
+
+ bguid = ifp->if_guid;
+ if(!bguid[0] && !bguid[1] && !bguid[2]) {
+ /* original incorrect GUID format in flash; fix in core copy, by
+ * shifting up 2 octets; don't need to change top octet, since both
+ * it and shifted are 0.. */
+ bguid[1] = bguid[3];
+ bguid[2] = bguid[4];
+ bguid[3] = bguid[4] = 0;
+ guid = *(uint64_t *)ifp->if_guid;
+ _IPATH_VDBG("Old GUID format in flash, top 3 zero, shifting 2 octets\n");
+ }
+ else
+ guid = *(uint64_t *)ifp->if_guid;
+ devdata[t].ipath_guid = guid;
+ devdata[t].ipath_nguid = ifp->if_numguid;
+ memcpy(devdata[t].ipath_serial, ifp->if_serial, sizeof(ifp->if_serial));
+ _IPATH_VDBG("Initted GUID to %llx (big-endian) from i2c flash\n",
+ devdata[t].ipath_guid);
+
+done:
+ vfree(buf);
+}
+
+static void __devexit infinipath_remove_one(struct pci_dev *pdev)
+{
+ ipath_devdata *dd;
+
+ _IPATH_VDBG("pci_release, pdev=%p\n", pdev);
+ if (pdev) {
+ device_remove_file(&(pdev->dev), &dev_attr_status);
+ device_remove_file(&(pdev->dev), &dev_attr_status_str);
+ device_remove_file(&(pdev->dev), &dev_attr_lid);
+ device_remove_file(&(pdev->dev), &dev_attr_mlid);
+ device_remove_file(&(pdev->dev), &dev_attr_guid);
+ device_remove_file(&(pdev->dev), &dev_attr_nguid);
+ device_remove_file(&(pdev->dev), &dev_attr_serial);
+ device_remove_file(&(pdev->dev), &dev_attr_unit);
+ dd = pci_get_drvdata(pdev);
+ pci_set_drvdata(pdev, NULL);
+ _IPATH_VDBG
+ ("Releasing pci memory regions, devdata %p, unit %u\n", dd,
+ (uint32_t) (dd - devdata));
+ if (dd && dd->ipath_kregbase) {
+ _IPATH_VDBG("Unmapping kregbase %p\n",
+ dd->ipath_kregbase);
+ iounmap((void *)dd->ipath_kregbase);
+ dd->ipath_kregbase = NULL;
+ }
+ pci_release_regions(pdev);
+ _IPATH_VDBG("calling pci_disable_device\n");
+ pci_disable_device(pdev);
+ }
+}
+
+int ipath_open(struct inode *, struct file *);
+static int ipath_opensma(struct inode *, struct file *);
+int ipath_close(struct inode *, struct file *);
+static unsigned int ipath_poll(struct file *, struct poll_table_struct *);
+long ipath_ioctl(struct file *, unsigned int, unsigned long);
+static loff_t ipath_llseek(struct file *, loff_t, int);
+static int ipath_mmap(struct file *, struct vm_area_struct *);
+
+static struct file_operations ipath_fops = {
+ .owner = THIS_MODULE,
+ .open = ipath_open,
+ .release = ipath_close,
+ .poll = ipath_poll,
+ /*
+ * all of ours are completely compatible and don't require the
+ * kernel lock
+ */
+ .compat_ioctl = ipath_ioctl,
+ /* we don't need kernel lock for our ioctls */
+ .unlocked_ioctl = ipath_ioctl,
+ .llseek = ipath_llseek,
+ .mmap = ipath_mmap
+};
+
+static DECLARE_MUTEX(ipath_mutex); /* general driver use */
+spinlock_t ipath_pioavail_lock;
+
+/*
+ * For now, at least (and probably forever), we don't require root
+ * or equivalent permissions to use the device.
+ */
+
+int ipath_open(struct inode *in, struct file *fp)
+{
+ int ret = 0, minor, i, prefunit=-1, devmax;
+ int maxofallports, npresent = 0, notup = 0;
+ ipath_type ndev;
+
+ down(&ipath_mutex);
+
+ minor = iminor(in);
+ _IPATH_VDBG("open on dev %lx (minor %d)\n", (long)in->i_rdev, minor);
+
+ /* This code is present to allow a knowledgeable person to specify the
+ * layout of processes to processors before opening this driver, and
+ * then we'll assign the process to the "closest" HT-400 to
+ * that processor * (we assume reasonable connectivity, for now).
+ * This code assumes that if affinity has been set before this
+ * point, that at most one cpu is set; for now this is reasonable.
+ * I check for both cpus_empty() and cpus_full(), in case some
+ * kernel variant sets none of the bits when no affinity is set.
+ * 2.6.11 and 12 kernels have all present cpus set.
+ * Some day we'll have to fix it up further to handle a cpu subset.
+ * This algorithm fails for two HT-400's connected in tunnel fashion.
+ * Eventually this needs real topology information.
+ * There may be some issues with dual core numbering as well. This
+ * needs more work prior to release.
+ */
+ if(minor != IPATH_SMA
+#ifdef IPATH_DIAG
+ && minor != IPATH_DIAG
+#endif
+ && minor != IPATH_CTRL
+ && !cpus_empty(current->cpus_allowed)
+ && !cpus_full(current->cpus_allowed)) {
+ int ncpus = num_online_cpus(), curcpu = -1;
+ for(i=0; i<ncpus; i++)
+ if(cpu_isset(i, current->cpus_allowed)) {
+ _IPATH_PRDBG("%s[%u] affinity set for cpu %d\n",
+ current->comm, current->pid, i);
+ curcpu = i;
+ }
+ if(curcpu != -1) {
+ for(ndev = 0; ndev < infinipath_max; ndev++)
+ if((devdata[ndev].ipath_flags & IPATH_PRESENT)
+ && devdata[ndev].ipath_kregbase)
+ npresent++;
+ if(npresent) {
+ prefunit = curcpu/(ncpus/npresent);
+ _IPATH_DBG("%s[%u] %d chips, %d cpus, "
+ "%d cpus/chip, select unit %d\n",
+ current->comm, current->pid,
+ npresent, ncpus, ncpus/npresent,
+ prefunit);
+ }
+ }
+ }
+
+ if (minor == IPATH_SMA) {
+ ret = ipath_opensma(in, fp);
+ /* for ipath_ioctl */
+ fp->private_data = (void *)(unsigned long)minor;
+ goto done;
+ }
+#ifdef IPATH_DIAG
+ else if (minor == IPATH_DIAG) {
+ ret = ipath_opendiag(in, fp);
+ /* for ipath_ioctl */
+ fp->private_data = (void *)(unsigned long)minor;
+ goto done;
+ }
+#endif
+ else if (minor == IPATH_CTRL) {
+ /* for ipath_ioctl */
+ fp->private_data = (void *)(unsigned long)minor;
+ ret = 0;
+ goto done;
+ }
+ else if (minor) {
+ /*
+ * minor number 0 is used for all chips, we choose available
+ * chip ourselves, it isn't based on what they open.
+ */
+
+ _IPATH_DBG("open on invalid minor %u\n", minor);
+ ret = -ENXIO;
+ goto done;
+ }
+
+ /*
+ * for now, we use all ports on one, then all ports on the
+ * next, etc. Eventually we want to tweak this to be cpu/chip
+ * topology aware, and round-robin across chips that are
+ * configured and connected, placing processes on the closest
+ * available processor that isn't already over-allocated.
+ * multi-HT400 topology could be better handled
+ */
+
+ npresent = maxofallports = 0;
+ for (ndev = 0; ndev < infinipath_max; ndev++) {
+ if (!(devdata[ndev].ipath_flags & IPATH_PRESENT) ||
+ !devdata[ndev].ipath_kregbase)
+ continue;
+ npresent++;
+ if ((devdata[ndev].
+ ipath_flags & (IPATH_LINKDOWN | IPATH_LINKUNK))) {
+ _IPATH_VDBG("unit %u present, but link not ready\n",
+ ndev);
+ notup++;
+ continue;
+ } else if (!devdata[ndev].ipath_lid) {
+ _IPATH_VDBG
+ ("unit %u present, but LID not assigned, down\n",
+ ndev);
+ notup++;
+ continue;
+ }
+ if (devdata[ndev].ipath_cfgports > maxofallports)
+ maxofallports = devdata[ndev].ipath_cfgports;
+ }
+
+ /*
+ * user ports start at 1, kernel port is 0
+ * For now, we do round-robin access across all chips
+ */
+
+ devmax = prefunit!=-1 ? prefunit+1 : infinipath_max;
+recheck:
+ for (i = 1; i < maxofallports; i++) {
+ for (ndev = prefunit!=-1?prefunit:0; ndev < devmax; ndev++) {
+ if (!(devdata[ndev].ipath_flags & IPATH_PRESENT) ||
+ !devdata[ndev].ipath_kregbase
+ || !devdata[ndev].ipath_lid
+ || (devdata[ndev].
+ ipath_flags & (IPATH_LINKDOWN | IPATH_LINKUNK)))
+ break; /* can't use this chip */
+ if (i >= devdata[ndev].ipath_cfgports)
+ break; /* max'ed out on users of this chip */
+ if (!devdata[ndev].ipath_pd[i]) {
+ void *p, *ptmp;
+ p = kmalloc(sizeof(ipath_portdata), GFP_KERNEL);
+
+ /*
+ * allocate memory for use in
+ * ipath_tid_update() just once at open,
+ * not per call. Reduces cost of expected
+ * send setup
+ */
+
+ ptmp =
+ kmalloc(devdata[ndev].ipath_rcvtidcnt *
+ sizeof(uint16_t)
+ +
+ devdata[ndev].ipath_rcvtidcnt *
+ sizeof(struct page **), GFP_KERNEL);
+ if (!p || !ptmp) {
+ _IPATH_UNIT_ERROR(ndev,
+ "Unable to allocate portdata memory, failing open\n");
+ ret = -ENOMEM;
+ kfree(p);
+ kfree(ptmp);
+ goto done;
+ }
+ memset(p, 0, sizeof(ipath_portdata));
+ devdata[ndev].ipath_pd[i] = p;
+ devdata[ndev].ipath_pd[i]->port_port = i;
+ devdata[ndev].ipath_pd[i]->port_unit = ndev;
+ devdata[ndev].ipath_pd[i]->port_tid_pg_list =
+ ptmp;
+ init_waitqueue_head(&devdata[ndev].ipath_pd[i]->
+ port_wait);
+ }
+ if (!devdata[ndev].ipath_pd[i]->port_cnt) {
+ devdata[ndev].ipath_pd[i]->port_cnt = 1;
+ fp->private_data =
+ (void *)devdata[ndev].ipath_pd[i];
+ _IPATH_PRDBG("%s[%u] opened unit:port %u:%u\n",
+ current->comm, current->pid, ndev,
+ i);
+ devdata[ndev].ipath_pd[i]->port_pid =
+ current->pid;
+ strncpy(devdata[ndev].ipath_pd[i]->port_comm,
+ current->comm,
+ sizeof(devdata[ndev].ipath_pd[i]->
+ port_comm));
+ ipath_stats.sps_ports++;
+ goto done;
+ }
+ }
+ }
+
+ if (npresent) {
+ if (notup) {
+ ret = -ENETDOWN;
+ _IPATH_DBG
+ ("No ports available (none initialized and ready)\n");
+ } else {
+ if(prefunit > 0) { /* if we started above unit 0, retry from 0 */
+ _IPATH_PRDBG("%s[%u] no ports on prefunit %d, clear and re-check\n",
+ current->comm, current->pid, prefunit);
+ devmax = infinipath_max;
+ prefunit = -1;
+ goto recheck;
+ }
+ ret = -EBUSY;
+ _IPATH_DBG("No ports available\n");
+ }
+ } else {
+ ret = -ENXIO;
+ _IPATH_DBG("No boards found\n");
+ }
+
+done:
+ up(&ipath_mutex);
+ return ret;
+}
+
+static int ipath_opensma(struct inode *in, struct file *fp)
+{
+ ipath_type s;
+
+ if (ipath_sma_alive) {
+ _IPATH_DBG("SMA already running (pid %u), failing\n",
+ ipath_sma_alive);
+ return -EBUSY;
+ }
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM; /* all SMA functions are root-only */
+
+ for (s = 0; s < infinipath_max; s++) {
+ /* we need at least one infinipath device to be initialized. */
+ if (devdata[s].ipath_flags & IPATH_INITTED) {
+ ipath_sma_alive = current->pid;
+ *devdata[s].ipath_statusp |= IPATH_STATUS_SMA;
+ *devdata[s].ipath_statusp &= ~IPATH_STATUS_OIB_SMA;
+ }
+ }
+ if (ipath_sma_alive) {
+ _IPATH_SMADBG
+ ("SMA device now open, SMA active as PID %u\n",
+ ipath_sma_alive);
+ return 0;
+ }
+ _IPATH_DBG("No hardware yet found and initted, failing\n");
+ return -ENODEV;
+}
+
+
+#ifdef IPATH_DIAG
+static int ipath_opendiag(struct inode *in, struct file *fp)
+{
+ ipath_type s;
+
+ if (ipath_diag_alive) {
+ _IPATH_DBG("Diags already running (pid %u), failing\n",
+ ipath_diag_alive);
+ return -EBUSY;
+ }
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM; /* all diags functions are root-only */
+
+ for (s = 0; s < infinipath_max; s++)
+ /*
+ * we need at least one infinipath device to be present
+ * (don't use INITTED, because we want to be able to open
+ * even if device is in freeze mode, which cleared INITTED.
+ * There is s small amount of risk to this, which is
+ * why we also verify kregbase is set.
+ */
+
+ if ((devdata[s].ipath_flags & IPATH_PRESENT)
+ && devdata[s].ipath_kregbase) {
+ ipath_diag_alive = current->pid;
+ _IPATH_DBG("diag device now open, active as PID %u\n",
+ ipath_diag_alive);
+ return 0;
+ }
+ _IPATH_DBG("No hardware yet found and initted, failing diags\n");
+ return -ENODEV;
+}
+#endif
+
+/*
+ * clear all TID entries for a port, expected and eager.
+ * Used from ipath_close(), and at chip initialization.
+ */
+
+static void ipath_clear_tids(const ipath_type t, unsigned port)
+{
+ volatile uint64_t *tidbase;
+ int i;
+ ipath_devdata *dd;
+ uint64_t tidval;
+ dd = &devdata[t];
+
+ if (!dd->ipath_kregbase)
+ return;
+
+ /*
+ * chip errata bug 7358, try to work around it by marking invalid
+ * tids as having max length
+ */
+
+ tidval =
+ (~0ULL & INFINIPATH_RT_BUFSIZE_MASK) << INFINIPATH_RT_BUFSIZE_SHIFT;
+
+ /*
+ * need to invalidate all of the expected TID entries for this
+ * port, so we don't have valid entries that might somehow get
+ * used (early in next use of this port, or through some bug)
+ * We don't bother with the eager, because they are initialized
+ * each time before receives are enabled; expected aren't
+ */
+
+ tidbase = (volatile uint64_t *)((char *)(dd->ipath_kregbase) +
+ dd->ipath_rcvtidbase +
+ port * dd->ipath_rcvtidcnt *
+ sizeof(*tidbase));
+ _IPATH_VDBG("Invalidate expected TIDs for port %u, tidbase=%p\n", port,
+ tidbase);
+ for (i = 0; i < dd->ipath_rcvtidcnt; i++)
+ ipath_kput_memq(t, &tidbase[i], tidval);
+ yield(); /* don't hog the cpu */
+
+ /* zero the eager TID entries */
+ tidbase = (volatile uint64_t *)((char *)(dd->ipath_kregbase) +
+ dd->ipath_rcvegrbase +
+ port * dd->ipath_rcvegrcnt *
+ sizeof(*tidbase));
+
+ for (i = 0; i < dd->ipath_rcvegrcnt; i++)
+ ipath_kput_memq(t, &tidbase[i], tidval);
+ yield(); /* don't hog the cpu */
+}
+
+int ipath_close(struct inode *in, struct file *fp)
+{
+ int ret = 0;
+ ipath_portdata *pd;
+
+ _IPATH_VDBG("close on dev %lx, private data %p\n", (long)in->i_rdev,
+ fp->private_data);
+
+ down(&ipath_mutex);
+ if (iminor(in) == IPATH_SMA) {
+ ipath_type s;
+
+ ipath_sma_alive = 0;
+ _IPATH_SMADBG("Closing SMA device\n");
+ for (s = 0; s < infinipath_max; s++) {
+ if (!(devdata[s].ipath_flags & IPATH_INITTED))
+ continue;
+ *devdata[s].ipath_statusp &= ~IPATH_STATUS_SMA;
+ if (devdata[s].verbs_layer.l_flags &
+ IPATH_VERBS_KERNEL_SMA)
+ *devdata[s].ipath_statusp |=
+ IPATH_STATUS_OIB_SMA;
+ }
+ }
+#ifdef IPATH_DIAG
+ else if (iminor(in) == IPATH_DIAG) {
+ ipath_diag_alive = 0;
+ _IPATH_DBG("Closing DIAG device\n");
+ }
+#endif
+ else if (fp->private_data && 255UL < (unsigned long)fp->private_data) {
+ ipath_type t;
+ unsigned port;
+ ipath_devdata *dd;
+
+ pd = (ipath_portdata *) fp->private_data;
+ port = pd->port_port;
+ fp->private_data = NULL;
+ t = pd->port_unit;
+ if (t > infinipath_max) {
+ _IPATH_ERROR
+ ("closing, fp %p, pd %p, but unit %x not valid!\n",
+ fp, pd, t);
+ goto done;
+ }
+ dd = &devdata[t];
+
+ if (pd->port_hdrqfull) {
+ _IPATH_PRDBG
+ ("%s[%u] had %u rcvhdrqfull errors during run\n",
+ pd->port_comm, pd->port_pid, pd->port_hdrqfull);
+ pd->port_hdrqfull = 0;
+ }
+
+ if (pd->port_rcvwait_to || pd->port_piowait_to
+ || pd->port_rcvnowait || pd->port_pionowait) {
+ _IPATH_VDBG
+ ("port%u, %u rcv, %u pio wait timeo; %u rcv %u, pio already\n",
+ pd->port_port, pd->port_rcvwait_to,
+ pd->port_piowait_to, pd->port_rcvnowait,
+ pd->port_pionowait);
+ pd->port_rcvwait_to = pd->port_piowait_to =
+ pd->port_rcvnowait = pd->port_pionowait = 0;
+ }
+ if (pd->port_flag) {
+ _IPATH_DBG("port %u port_flag still set to 0x%x\n",
+ pd->port_port, pd->port_flag);
+ pd->port_flag = 0;
+ }
+
+ if (devdata[t].ipath_kregbase) {
+ if (pd->port_rcvhdrtail_uaddr) {
+ pd->port_rcvhdrtail_uaddr = 0;
+ pd->port_rcvhdrtail_kvaddr = NULL;
+ ipath_munlock(1, &pd->port_rcvhdrtail_pagep);
+ pd->port_rcvhdrtail_pagep = NULL;
+ ipath_stats.sps_pageunlocks++;
+ }
+ ipath_kput_kreg_port(t, kr_rcvhdrtailaddr, port, 0ULL);
+ ipath_kput_kreg_port(pd->port_unit, kr_rcvhdraddr,
+ pd->port_port, 0);
+
+ /* clean up the pkeys for this port user */
+ ipath_clean_partkey(pd, dd);
+
+ if (port < dd->ipath_cfgports) {
+ int i = dd->ipath_pbufsport * (port - 1);
+ ipath_disarm_piobufs(t, i, dd->ipath_pbufsport);
+
+ /* atomically clear receive enable port. */
+ atomic_clear_mask(1U <<
+ (INFINIPATH_R_PORTENABLE_SHIFT
+ + port),
+ &devdata[t].ipath_rcvctrl);
+ ipath_kput_kreg(t, kr_rcvctrl,
+ devdata[t].ipath_rcvctrl);
+
+ if (dd->ipath_pageshadow) {
+ /*
+ * unlock any expected TID
+ * entries port still had in use
+ */
+ int port_tidbase =
+ pd->port_port * dd->ipath_rcvtidcnt;
+ int i, cnt = 0, maxtid =
+ port_tidbase + dd->ipath_rcvtidcnt;
+
+ _IPATH_VDBG
+ ("Port %u unlocking any locked expTID pages\n",
+ pd->port_port);
+ for (i = port_tidbase; i < maxtid; i++) {
+ if (dd->ipath_pageshadow[i]) {
+ ipath_munlock(1,
+ &dd->
+ ipath_pageshadow
+ [i]);
+ dd->ipath_pageshadow[i]
+ = NULL;
+ cnt++;
+ ipath_stats.
+ sps_pageunlocks++;
+ }
+ }
+ if (cnt)
+ _IPATH_VDBG
+ ("Port %u had %u expTID entries locked\n",
+ pd->port_port, cnt);
+ if (ipath_stats.sps_pagelocks
+ || ipath_stats.sps_pageunlocks)
+ _IPATH_VDBG
+ ("%llu pages locked, %llu unlocked with"
+ " ipath_m{un}lock\n",
+ ipath_stats.sps_pagelocks,
+ ipath_stats.
+ sps_pageunlocks);
+ }
+ ipath_stats.sps_ports--;
+ _IPATH_PRDBG("%s[%u] closed port %u:%u\n",
+ pd->port_comm, pd->port_pid, t,
+ port);
+ }
+ }
+
+ pd->port_cnt = 0;
+ pd->port_pid = 0;
+
+ ipath_clear_tids(t, pd->port_port);
+
+ ipath_free_pddata(dd, pd->port_port, 0);
+ }
+
+done:
+ up(&ipath_mutex);
+
+ return ret;
+}
+
+/*
+ * cancel a range of PIO buffers, used when they might be armed, but
+ * not triggered. Used at init to ensure buffer state, and also user
+ * process close, in case it died while writing to a PIO buffer
+ */
+
+static void ipath_disarm_piobufs(const ipath_type t, unsigned first,
+ unsigned cnt)
+{
+ unsigned i, last = first + cnt;
+ uint64_t sendctrl;
+ for (i = first; i < last; i++) {
+ sendctrl = devdata[t].ipath_sendctrl | INFINIPATH_S_DISARM |
+ (i << INFINIPATH_S_DISARMPIOBUF_SHIFT);
+ ipath_kput_kreg(t, kr_sendctrl, sendctrl);
+ }
+}
+
+static void ipath_clean_partkey(ipath_portdata * pd, ipath_devdata * dd)
+{
+ int i, j, pchanged = 0;
+ uint64_t oldpkey;
+
+ /* for debugging only */
+ oldpkey =
+ (uint64_t) dd->ipath_pkeys[0] | ((uint64_t) dd->
+ ipath_pkeys[1] << 16)
+ | ((uint64_t) dd->ipath_pkeys[2] << 32)
+ | ((uint64_t) dd->ipath_pkeys[3] << 48);
+
+ for (i = 0; i < (sizeof(pd->port_pkeys) / sizeof(pd->port_pkeys[0]));
+ i++) {
+ if (!pd->port_pkeys[i])
+ continue;
+ _IPATH_VDBG("look for key[%d] %hx in pkeys\n", i,
+ pd->port_pkeys[i]);
+ for (j = 0;
+ j < (sizeof(dd->ipath_pkeys) / sizeof(dd->ipath_pkeys[0]));
+ j++) {
+ /* check for match independent of the global bit */
+ if ((dd->ipath_pkeys[j] & 0x7fff) ==
+ (pd->port_pkeys[i] & 0x7fff)) {
+ if (atomic_dec_and_test(&dd->ipath_pkeyrefs[j])) {
+ _IPATH_VDBG
+ ("p%u clear key %x matches #%d\n",
+ pd->port_port, pd->port_pkeys[i],
+ j);
+ ipath_stats.sps_pkeys[j] =
+ dd->ipath_pkeys[j] = 0;
+ pchanged++;
+ } else
+ _IPATH_VDBG
+ ("p%u key %x matches #%d, but ref still %d\n",
+ pd->port_port, pd->port_pkeys[i],
+ j,
+ atomic_read(&dd->
+ ipath_pkeyrefs[j]));
+ break;
+ }
+ }
+ pd->port_pkeys[i] = 0;
+ }
+ if (pchanged) {
+ uint64_t pkey;
+ pkey =
+ (uint64_t) dd->ipath_pkeys[0] | ((uint64_t) dd->
+ ipath_pkeys[1] << 16)
+ | ((uint64_t) dd->ipath_pkeys[2] << 32)
+ | ((uint64_t) dd->ipath_pkeys[3] << 48);
+ _IPATH_VDBG("p%u old pkey reg %llx, new pkey reg %llx\n",
+ pd->port_port, oldpkey, pkey);
+ ipath_kput_kreg(pd->port_unit, kr_partitionkey, pkey);
+ }
+}
+
+static unsigned int ipath_poll(struct file *fp, struct poll_table_struct *pt)
+{
+ int ret;
+ ipath_portdata *pd;
+
+ pd = port_fp(fp);
+ /* nothing for select/poll in this driver, at least for now */
+ ret = 0;
+
+ return ret;
+}
+
+/*
+ * wait up to msecs milliseconds for IB link state change to occur
+ * for now, take the easy polling route. Currently used only by
+ * the SMA ioctls. Returns 0 if state reached, otherwise -ETIMEDOUT
+ * state can have multiple states set, for any of several transitions.
+ */
+
+int ipath_wait_linkstate(const ipath_type t, uint32_t state, int msecs)
+{
+ devdata[t].ipath_sma_state_wanted = state;
+ wait_event_interruptible_timeout(ipath_sma_state_wait,
+ (devdata[t].ipath_flags & state),
+ msecs_to_jiffies(msecs));
+ devdata[t].ipath_sma_state_wanted = 0;
+
+ if (!(devdata[t].ipath_flags & state))
+ _IPATH_DBG
+ ("Didn't reach linkstate %s within %u ms (ibcc %llx %s)\n",
+ /* test INIT ahead of DOWN, both can be set */
+ (state & IPATH_LINKINIT) ? "INIT" :
+ ((state & IPATH_LINKDOWN) ? "DOWN" :
+ ((state & IPATH_LINKARMED) ? "ARM" : "ACTIVE")),
+ msecs, ipath_kget_kreg64(t, kr_ibcctrl),
+ ipath_ibcstatus_str[ipath_kget_kreg64(t, kr_ibcstatus) &
+ 0xf]);
+ return (devdata[t].ipath_flags & state) ? 0 : -ETIMEDOUT;
+}
+
+/* unit number is already validated in ipath_ioctl() */
+static int ipath_kset_lid(uint32_t arg)
+{
+ unsigned unit = (arg >> 16) & 0xffff;
+
+ if (unit >= infinipath_max
+ || !(devdata[unit].ipath_flags & IPATH_INITTED)) {
+ _IPATH_DBG("Invalid unit %u\n", unit);
+ return -ENODEV;
+ }
+
+ arg &= 0xffff;
+ _IPATH_SMADBG("Unit %u setting lid to 0x%x, was 0x%x\n", unit, arg,
+ devdata[unit].ipath_lid);
+ ipath_set_sps_lid(unit, arg);
+ return 0;
+}
+
+static int ipath_kset_mlid(uint32_t arg)
+{
+ unsigned unit = (arg >> 16) & 0xffff;
+
+ if (unit >= infinipath_max
+ || !(devdata[unit].ipath_flags & IPATH_INITTED)) {
+ _IPATH_DBG("Invalid unit %u\n", unit);
+ return -ENODEV;
+ }
+
+ arg &= 0xffff;
+ _IPATH_SMADBG("Unit %u setting mlid to 0x%x, was 0x%x\n", unit, arg,
+ devdata[unit].ipath_mlid);
+ ipath_stats.sps_mlid[unit] = devdata[unit].ipath_mlid = arg;
+ if (devdata[unit].ipath_layer.l_intr)
+ devdata[unit].ipath_layer.l_intr(unit, IPATH_LAYER_INT_BCAST);
+ return 0;
+}
+
+/* unit number is in incoming, overwritten on return with data */
+
+static int ipath_get_devstatus(uint64_t * a)
+{
+ int ret;
+ uint64_t unit64;
+ uint32_t unit;
+ uint64_t devstatus;
+
+ if ((ret = copy_from_user(&unit64, a, sizeof unit64))) {
+ _IPATH_DBG("Failed to copy in unit: %d\n", ret);
+ return ret;
+ }
+ unit = unit64;
+ if (unit >= infinipath_max
+ || !(devdata[unit].ipath_flags & IPATH_INITTED)) {
+ _IPATH_DBG("Invalid unit %u\n", unit);
+ return -ENODEV;
+ }
+
+ devstatus = *devdata[unit].ipath_statusp;
+
+ if ((ret = copy_to_user(a, &devstatus, sizeof devstatus)))
+ _IPATH_DBG("Failed to copy out device status: %d\n", ret);
+ return ret;
+}
+
+/* unit number is in incoming, overwritten on return with data */
+
+static int ipath_get_mlid(uint32_t * a)
+{
+ int ret;
+ uint32_t unit;
+ uint32_t mlid;
+
+ if ((ret = copy_from_user(&unit, a, sizeof unit))) {
+ _IPATH_DBG("Failed to copy in mlid: %d\n", ret);
+ return ret;
+ }
+ if (unit >= infinipath_max
+ || !(devdata[unit].ipath_flags & IPATH_INITTED)) {
+ _IPATH_DBG("Invalid unit %u\n", unit);
+ return -ENODEV;
+ }
+
+ mlid = devdata[unit].ipath_mlid;
+
+ if ((ret = copy_to_user(a, &mlid, sizeof mlid)))
+ _IPATH_DBG("Failed to copy out MLID: %d\n", ret);
+ return ret;
+}
+
+static int ipath_kset_guid(struct ipath_setguid *a)
+{
+ struct ipath_setguid setguid;
+ int ret;
+
+ if ((ret = copy_from_user(&setguid, a, sizeof setguid))) {
+ _IPATH_DBG("Failed to copy in guid info: %d\n", ret);
+ return ret;
+ }
+ if (setguid.sunit >= infinipath_max ||
+ !(devdata[setguid.sunit].ipath_flags & IPATH_INITTED)) {
+ _IPATH_DBG("Invalid unit %llu\n", setguid.sunit);
+ return -ENODEV;
+ }
+ if (setguid.sguid == 0ULL || setguid.sguid == ~0ULL) {
+ /*
+ * use INFO, not DBG, because ipath_mux doesn't yet
+ * complain about errors on this
+ */
+
+ _IPATH_INFO("Ignoring attempt to set invalid GUID %llx\n",
+ setguid.sguid);
+ return -EINVAL;
+ }
+ devdata[setguid.sunit].ipath_guid = setguid.sguid;
+ devdata[setguid.sunit].ipath_nguid = 1;
+ _IPATH_DBG("SMA set hardware GUID unit %llu to %llx (network order)\n",
+ setguid.sunit, devdata[setguid.sunit].ipath_guid);
+ return 0;
+}
+
+/*
+ * receive an IB packet with QP 0 or 1. For now, we have no timeout implemented
+ * We put the actual received count into the iov on return, and the unit we
+ * received from goes into the lower 16 bits of sps_flags.
+ * This receives from all/any of the active chips, and we currently do not
+ * allow specifying just one (we could, by filling in unit in the library
+ * before the syscall, and checking here).
+ */
+
+static int ipath_rcvsma_pkt(struct ipath_sendpkt * p)
+{
+ struct ipath_sendpkt rpkt;
+ int i, any, ret;
+ unsigned long flags;
+
+ if ((ret = copy_from_user(&rpkt, p, sizeof rpkt))) {
+ _IPATH_DBG("Failed to copy in pkt struct (%d)\n", ret);
+ return ret;
+ }
+ if (!ipath_sma_data_spare) {
+ _IPATH_DBG("can't do receive, sma not initialized\n");
+ return -ENETDOWN;
+ }
+
+ for (any = i = 0; i < infinipath_max; i++)
+ if (devdata[i].ipath_flags & IPATH_INITTED)
+ any++;
+ if (!any) { /* no hardware, freeze, etc. */
+ _IPATH_SMADBG("Didn't find any initialized and usable chips\n");
+ return -ENODEV;
+ }
+
+ wait_event_interruptible(ipath_sma_wait,
+ ipath_sma_data[ipath_sma_first].len);
+
+ spin_lock_irqsave(&ipath_sma_lock, flags);
+ if (ipath_sma_data[ipath_sma_first].len) {
+ int len;
+ uint32_t slen;
+ uint8_t *sdata;
+ struct _ipath_sma_rpkt *smpkt =
+ &ipath_sma_data[ipath_sma_first];
+
+ /*
+ * we swap out the buffer we are going to use with the
+ * spare buffer and set spare to that buffer. This code
+ * is the only code that ever manipulates spare, other
+ * than the initialization code. This code should never
+ * be entered by more than one process at a time, and
+ * if it is, the user code doing so deserves what it gets;
+ * it won't break anything in the driver by doing so.
+ * We do it this way to avoid holding a lock across the
+ * copy_to_user, which could fault, or delay a long time
+ * while paging occurs; ditto for printks
+ */
+
+ slen = smpkt->len;
+ sdata = smpkt->buf;
+ rpkt.sps_flags = smpkt->unit;
+ smpkt->buf = ipath_sma_data_spare;
+ ipath_sma_data_spare = sdata;
+ smpkt->len = 0; /* it's available again */
+ if (++ipath_sma_first >= IPATH_NUM_SMAPKTS)
+ ipath_sma_first = 0;
+ spin_unlock_irqrestore(&ipath_sma_lock, flags);
+
+ len = min((uint32_t) rpkt.sps_iov[0].iov_len, slen);
+ ret =
+ copy_to_user((void *)rpkt.sps_iov[0].iov_base, sdata, len);
+ _IPATH_VDBG
+ ("SMA packet (index=%d), len %d (actual %d) buf %p, ubuf %llx\n",
+ ipath_sma_first, slen, len, sdata,
+ rpkt.sps_iov[0].iov_base);
+ if (!ret) {
+ /* actual length read. */
+ rpkt.sps_iov[0].iov_len = len;
+ rpkt.sps_cnt = 1; /* received one packet */
+ if ((ret = copy_to_user(p, &rpkt, sizeof rpkt)))
+ _IPATH_DBG
+ ("Failed to copy out pkt struct (%d)\n",
+ ret);
+ } else
+ _IPATH_DBG("copyout failed: %d\n", ret);
+ } else {
+ /* usually means SMA process received a signal */
+ spin_unlock_irqrestore(&ipath_sma_lock, flags);
+ return -EAGAIN;
+ }
+
+ return ret;
+}
+
+/* unit number is in first word incoming, overwritten on return with data */
+static int ipath_get_portinfo(uint32_t * a)
+{
+ int ret;
+ uint32_t unit, tmp, tmp2;
+ ipath_devdata *dd;
+ uint32_t portinfo[13]; /* just the data for Portinfo, in host horder */
+
+ if ((ret = copy_from_user(&unit, a, sizeof unit))) {
+ _IPATH_DBG("Failed to copy in portinfo: %d\n", ret);
+ return ret;
+ }
+ if (unit >= infinipath_max
+ || !(devdata[unit].ipath_flags & IPATH_INITTED)) {
+ _IPATH_DBG("Invalid unit %u\n", unit);
+ return -ENODEV;
+ }
+ dd = &devdata[unit];
+ /* so we only initialize non-zero fields. */
+ memset(portinfo, 0, sizeof portinfo);
+
+ /*
+ * Notimpl yet M_Key (64)
+ * Notimpl yet GID (64)
+ */
+
+ portinfo[4] = (dd->ipath_lid << 16);
+
+ /*
+ * Notimpl yet SMLID (should we store this in the driver, in
+ * case SMA dies?)
+ * CapabilityMask is 0, we don't support any of these
+ * DiagCode is 0; we don't store any diag info for now
+ * Notimpl yet M_KeyLeasePeriod (we don't support M_Key)
+ */
+
+ /* LocalPortNum is whichever port number they ask for */
+ portinfo[7] = (unit << 24)
+ /* LinkWidthEnabled */
+ |(2 << 16)
+ /* LinkWidthSupported (really 2, but that's not IB valid...) */
+ |(3 << 8)
+ /* LinkWidthActive */
+ |(2 << 0);
+ tmp = dd->ipath_lastibcstat & 0xff;
+ tmp2 = 5;
+ if (tmp == 0x11)
+ tmp = 2;
+ else if (tmp == 0x21)
+ tmp = 3;
+ else if (tmp == 0x31)
+ tmp = 4;
+ else {
+ tmp = 0; /* down */
+ tmp2 = tmp & 0xf;
+ }
+ portinfo[8] = (1 << 28) /* LinkSpeedSupported */
+ |(tmp << 24) /* PortState */
+ |(tmp2 << 20) /* PortPhysicalState */
+ |(2 << 16)
+
+ /* LinkDownDefaultState */
+ /* M_KeyProtectBits == 0 */
+ /* NotImpl yet LMC == 0 (we can support all values) */
+ |(1 << 4) /* LinkSpeedActive */
+ |(1 << 0); /* LinkSpeedEnabled */
+ switch (dd->ipath_ibmtu) {
+ case 4096:
+ tmp = 5;
+ break;
+ case 2048:
+ tmp = 4;
+ break;
+ case 1024:
+ tmp = 3;
+ break;
+ case 512:
+ tmp = 2;
+ break;
+ case 256:
+ tmp = 1;
+ break;
+ default: /* oops, something is wrong */
+ _IPATH_DBG
+ ("Problem, ipath_ibmtu 0x%x not a valid IB MTU, treat as 2048\n",
+ dd->ipath_ibmtu);
+ tmp = 4;
+ break;
+ }
+ portinfo[9] = (tmp << 28)
+ /* NeighborMTU */
+ /* Notimpl MasterSMSL */
+ |(1 << 20)
+
+ /* VLCap */
+ /* Notimpl InitType (actually, an SMA decision) */
+ /* VLHighLimit is 0 (only one VL) */
+ ; /* VLArbitrationHighCap is 0 (only one VL) */
+ portinfo[10] = /* VLArbitrationLowCap is 0 (only one VL) */
+ /* InitTypeReply is SMA decision */
+ (5 << 16) /* MTUCap 4096 */
+ |(7 << 13) /* VLStallCount */
+ |(0x1f << 8) /* HOQLife */
+ |(1 << 4) /* OperationalVLs 0 */
+ |(1 << 3)
+
+ /* PartitionEnforcementInbound */
+ /* PartitionEnforcementOutbound not enforced */
+ /* FilterRawinbound not enforced */
+ ; /* FilterRawOutbound not enforced */
+ /* M_KeyViolations are not counted by hardware, SMA can count */
+ tmp = ipath_kget_creg32(unit, cr_errpkey);
+ /* P_KeyViolations are counted by hardware. */
+ portinfo[11] = ((tmp & 0xffff) << 0);
+ portinfo[12] =
+ /* Q_KeyViolations are not counted by hardware */
+ (1 << 8)
+
+ /* GUIDCap */
+ /* SubnetTimeOut handled by SMA */
+ /* RespTimeValue handled by SMA */
+ ;
+ /* LocalPhyErrors are programmed to max */
+ portinfo[12] |= (0xf << 20)
+ |(0xf << 16) /* OverRunErrors are programmed to max */
+ ;
+
+ if ((ret = copy_to_user(a, portinfo, sizeof portinfo)))
+ _IPATH_DBG("Failed to copy out portinfo: %d\n", ret);
+ return ret;
+}
+
+/* unit number is in first word incoming, overwritten on return with data */
+static int ipath_get_nodeinfo(uint32_t * a)
+{
+ int ret;
+ uint32_t unit; /*, tmp, tmp2; */
+ ipath_devdata *dd;
+ uint32_t nodeinfo[10]; /* just the data for Nodeinfo, in host horder */
+
+ if ((ret = copy_from_user(&unit, a, sizeof unit))) {
+ _IPATH_DBG("Failed to copy in nodeinfo: %d\n", ret);
+ return ret;
+ }
+ if (unit >= infinipath_max
+ || !(devdata[unit].ipath_flags & IPATH_INITTED)) {
+ /* VDBG because sma normally probes for all possible units */
+ _IPATH_VDBG("Invalid unit %u\n", unit);
+ return -ENODEV;
+ }
+ dd = &devdata[unit];
+
+ /* so we only initialize non-zero fields. */
+ memset(nodeinfo, 0, sizeof nodeinfo);
+
+ nodeinfo[0] = /* BaseVersion is SMA */
+ /* ClassVersion is SMA */
+ (1 << 8) /* NodeType */
+ |(1 << 0); /* NumPorts */
+ nodeinfo[1] = (uint32_t) (dd->ipath_guid >> 32);
+ nodeinfo[2] = (uint32_t) (dd->ipath_guid & 0xffffffff);
+ nodeinfo[3] = nodeinfo[1]; /* PortGUID == SystemImageGUID for us */
+ nodeinfo[4] = nodeinfo[2]; /* PortGUID == SystemImageGUID for us */
+ nodeinfo[5] = nodeinfo[3]; /* PortGUID == NodeGUID for us */
+ nodeinfo[6] = nodeinfo[4]; /* PortGUID == NodeGUID for us */
+ nodeinfo[7] = (4 << 16) /* we support 4 pkeys */
+ |(dd->ipath_deviceid << 0);
+ /* our chip version as 16 bits major, 16 bits minor */
+ nodeinfo[8] = dd->ipath_minrev | (dd->ipath_majrev << 16);
+ nodeinfo[9] = (unit << 24) | (dd->ipath_vendorid << 0);
+
+ if ((ret = copy_to_user(a, nodeinfo, sizeof nodeinfo)))
+ _IPATH_DBG("Failed to copy out nodeinfo: %d\n", ret);
+ return ret;
+}
+
+static int ipath_sma_ioctl(struct file *fp, unsigned int cmd, unsigned long a)
+{
+ int ret = 0;
+ switch (cmd) {
+ case IPATH_SEND_SMA_PKT: /* send SMA packet */
+ if (!(ret = ipath_send_smapkt((struct ipath_sendpkt *) a)))
+ /* another SMA packet sent */
+ ipath_stats.sps_sma_spkts++;
+ break;
+ case IPATH_RCV_SMA_PKT: /* recieve an SMA or MAD packet */
+ ret = ipath_rcvsma_pkt((struct ipath_sendpkt *) a);
+ break;
+ case IPATH_SET_LID: /* set our lid, (SMA) */
+ ret = ipath_kset_lid((uint32_t) a);
+ break;
+ case IPATH_SET_MTU: /* set the IB mtu (not maxpktlen) (SMA) */
+ ret = ipath_kset_mtu((uint32_t) a);
+ break;
+ case IPATH_SET_LINKSTATE:
+ /* walk through the linkstate states (SMA) */
+ ret = ipath_kset_linkstate((uint32_t) a);
+ break;
+ case IPATH_GET_PORTINFO: /* get the SMA portinfo */
+ ret = ipath_get_portinfo((uint32_t *) a);
+ break;
+ case IPATH_GET_NODEINFO: /* get the SMA nodeinfo */
+ ret = ipath_get_nodeinfo((uint32_t *) a);
+ break;
+ case IPATH_SET_GUID:
+ /*
+ * set our guid, (SMA). This is not normally
+ * used, but provides a way to set the GUID when the i2c flash
+ * has a problem, or for special testing.
+ */
+ ret = ipath_kset_guid((struct ipath_setguid *)a);
+ break;
+ case IPATH_SET_MLID: /* set multicast LID for ipath broadcast */
+ ret = ipath_kset_mlid((uint32_t) a);
+ break;
+ case IPATH_GET_MLID: /* get multicast LID for ipath broadcast */
+ ret = ipath_get_mlid((uint32_t *) a);
+ break;
+ case IPATH_GET_DEVSTATUS: /* get device status */
+ ret = ipath_get_devstatus((uint64_t *) a);
+ break;
+ default:
+ _IPATH_DBG("%x not a valid SMA ioctl for infinipath\n", cmd);
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int ipath_get_unit_counters(struct infinipath_getunitcounters *a)
+{
+ struct infinipath_getunitcounters c;
+
+ if(copy_from_user(&c, (void *)a, sizeof c))
+ return -EFAULT;
+ return ipath_get_counters(c.unit, (struct infinipath_counters *)c.data);
+}
--
0.99.9n
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/