[-mm PATCH] EDAC: make Kconfig defaults match recommendations in help text
From: Jesper Juhl
Date: Sun Dec 11 2005 - 08:14:47 EST
"config EDAC" and "config EDAC_MM_EDAC" both state clearly that if the user
is unsure she should select "Y", yet the default for those options is "N".
This patch brings the default for the options into line with the
recommendation stated in the help text.
Please consider for inclusion.
Signed-off-by: Jesper Juhl <jesper.juhl@xxxxxxxxx>
---
drivers/edac/Kconfig | 2 ++
1 files changed, 2 insertions(+)
diff -U 7 linux-2.6.15-rc5-mm2-orig/drivers/edac/Kconfig linux-2.6.15-rc5-mm2/drivers/edac/Kconfig
--- linux-2.6.15-rc5-mm2-orig/drivers/edac/Kconfig 2005-12-11 13:53:26.000000000 +0100
+++ linux-2.6.15-rc5-mm2/drivers/edac/Kconfig 2005-12-11 14:04:06.000000000 +0100
@@ -7,14 +7,15 @@
#
menu 'EDAC - error detection and reporting (RAS)'
config EDAC
tristate "EDAC core system error reporting"
depends on X86
+ default y
help
EDAC is designed to report errors in the core system.
These are low-level errors that are reported in the CPU or
supporting chipset: memory errors, cache errors, PCI errors,
thermal throttling, etc.. If unsure, select 'Y'.
@@ -29,14 +30,15 @@
sub-system. You can insert module with "debug_level=x", current
there're four debug levels (x=0,1,2,3 from low to high).
Usually you should select 'N'.
config EDAC_MM_EDAC
tristate "Main Memory EDAC (Error Detection And Correction) reporting"
depends on EDAC
+ default y
help
Some systems are able to detect and correct errors in main
memory. EDAC can report statistics on memory error
detection and correction (EDAC - or commonly referred to ECC
errors). EDAC will also try to decode where these errors
occurred so that a particular failing memory module can be
replaced. If unsure, select 'Y'.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/