2.6.15-rc2-mm1 problems

From: Chris Boot
Date: Wed Nov 23 2005 - 18:45:46 EST


Hi all,

I just installed 2.6.15-rc2-mm1 to give it a shot and my machine is unable to bring up its firewall. I enabled CONFIG_PREEMPT from my previous test version (2.6.14-mm1) and found I couldn't login anymore over SSH. dmesg shows the following:

[4294742.531000] ip_tables: (C) 2000-2002 Netfilter core team
[4294742.579000] Netfilter messages via NETLINK v0.30.
[4294742.594000] ip_conntrack version 2.4 (8191 buckets, 65528 max) - 232 bytes per conntrack
[4294742.879000] scheduling while atomic: iptables/0x00000001/11671
[4294742.905000] [<c032eb01>] schedule+0x591/0x690
[4294742.905000] [<c0114495>] activate_task+0x65/0x80
[4294742.905000] [<c01145ab>] try_to_wake_up+0xbb/0xc0
[4294742.905000] [<c032ed58>] wait_for_completion+0x78/0xf0
[4294742.905000] [<c0114ee0>] default_wake_function+0x0/0x10
[4294742.905000] [<c0114ee0>] default_wake_function+0x0/0x10
[4294742.905000] [<c01285d5>] call_usermodehelper_keys+0xa5/0xb0
[4294742.905000] [<c01284e0>] __call_usermodehelper+0x0/0x50
[4294742.905000] [<c0128356>] request_module+0x96/0xe0
[4294742.905000] [<c021da7e>] as_update_arq+0x1e/0x70
[4294742.905000] [<fa3af14f>] translate_table+0x92f/0xc30 [ip_tables]
[4294742.905000] [<c014e8bc>] map_vm_area+0x6c/0xa0
[4294742.905000] [<fa3afa06>] do_replace+0x106/0x770 [ip_tables]
[4294742.906000] [<fa3b04b4>] do_ipt_get_ctl+0x174/0x510 [ip_tables]
[4294742.906000] [<c02a77e7>] ata_scsi_translate+0x87/0x110
[4294742.906000] [<c0296b10>] scsi_done+0x0/0x20
[4294742.906000] [<fa3b0321>] do_ipt_set_ctl+0x41/0x60 [ip_tables]
[4294742.906000] [<c02ee272>] nf_sockopt+0xb2/0x110
[4294742.906000] [<c02ee2f0>] nf_setsockopt+0x20/0x30
[4294742.906000] [<c02fa4ac>] ip_setsockopt+0xcc/0xae0
[4294742.906000] [<c02ee23f>] nf_sockopt+0x7f/0x110
[4294742.906000] [<c02faf65>] ip_getsockopt+0xa5/0x5f0
[4294742.906000] [<c013b2b1>] do_generic_mapping_read+0x431/0x530
[4294742.906000] [<c01de602>] xfs_ip2xflags+0x12/0x30
[4294742.906000] [<c01fa8ff>] xfs_getattr+0x25f/0x2d0
[4294742.906000] [<c02086dc>] xfs_ichgtime+0x11c/0x130
[4294742.906000] [<c013f20a>] buffered_rmqueue+0xfa/0x210
[4294742.906000] [<c02289a8>] fast_clear_page+0x8/0x60
[4294742.906000] [<c013f2b2>] buffered_rmqueue+0x1a2/0x210
[4294742.906000] [<c013aaf4>] find_get_page+0x14/0x50
[4294742.906000] [<c013bda3>] filemap_nopage+0x2f3/0x370
[4294742.906000] [<c014926e>] do_no_page+0x1ee/0x280
[4294742.906000] [<c02d6263>] sock_common_setsockopt+0x23/0x30
[4294742.906000] [<c02d3b0b>] sys_setsockopt+0x5b/0xa0
[4294742.906000] [<c02d427f>] sys_socketcall+0x23f/0x290
[4294742.906000] [<c01599fc>] filp_close+0x3c/0x80
[4294742.906000] [<c0102c8b>] sysenter_past_esp+0x54/0x75

I use Shorewall as my firewall script, and the system runs Gentoo. .config attached.

On another note, I can't get the binary nVidia drivers to work, they complain about the following unresolved symbols:

[4294682.396000] nvidia: module license 'NVIDIA' taints kernel.
[4294682.396000] nvidia: Unknown symbol pci_enable_device
[4294682.396000] nvidia: Unknown symbol pci_dev_put
[4294682.396000] nvidia: Unknown symbol pci_get_device
[4294682.396000] nvidia: Unknown symbol __pci_register_driver
[4294682.396000] nvidia: Unknown symbol pci_bus_write_config_byte
[4294682.396000] nvidia: Unknown symbol pci_unregister_driver
[4294682.396000] nvidia: Unknown symbol pci_bus_read_config_dword
[4294682.396000] nvidia: Unknown symbol pci_bus_read_config_word
[4294682.396000] nvidia: Unknown symbol pci_bus_write_config_dword
[4294682.397000] nvidia: Unknown symbol pci_set_master
[4294682.397000] nvidia: Unknown symbol pci_bus_write_config_word
[4294682.397000] nvidia: Unknown symbol pci_get_class
[4294682.397000] nvidia: Unknown symbol pci_disable_device
[4294682.397000] nvidia: Unknown symbol pci_bus_read_config_byte

Thanks,
Chris

--
Chris Boot
bootc@xxxxxxxxx
http://www.bootc.net/

Attachment: config
Description: Binary data


Attachment: smime.p7s
Description: S/MIME cryptographic signature