[patch 04/22] USB: wacom tablet driver update

From: Greg Kroah-Hartman
Date: Thu Nov 17 2005 - 13:08:16 EST


From: Ping Cheng <pingc@xxxxxxxxx>


This patch adds support for Graphire4, Cintiq 710, Intuos3 6x11, etc. and
report Device IDs.

Signed-off-by: Ping Cheng <pingc@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>

---
drivers/usb/input/wacom.c | 133 ++++++++++++++++++++++++++++++++++++++--------
1 file changed, 110 insertions(+), 23 deletions(-)

--- usb-2.6.orig/drivers/usb/input/wacom.c
+++ usb-2.6/drivers/usb/input/wacom.c
@@ -52,8 +52,10 @@
* v1.30.1 (pi) - Added Graphire3 support
* v1.40 (pc) - Add support for several new devices, fix eraser reporting, ...
* v1.43 (pc) - Added support for Cintiq 21UX
- - Fixed a Graphire bug
- - Merged wacom_intuos3_irq into wacom_intuos_irq
+ * - Fixed a Graphire bug
+ * - Merged wacom_intuos3_irq into wacom_intuos_irq
+ * v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc.
+ * - Report Device IDs
*/

/*
@@ -76,7 +78,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.43"
+#define DRIVER_VERSION "v1.44"
#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@xxxxxx>"
#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
#define DRIVER_LICENSE "GPL"
@@ -86,10 +88,14 @@ MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE(DRIVER_LICENSE);

#define USB_VENDOR_ID_WACOM 0x056a
+#define STYLUS_DEVICE_ID 0x02
+#define CURSOR_DEVICE_ID 0x06
+#define ERASER_DEVICE_ID 0x0A

enum {
PENPARTNER = 0,
GRAPHIRE,
+ G4,
PL,
INTUOS,
INTUOS3,
@@ -116,6 +122,7 @@ struct wacom {
struct urb *irq;
struct wacom_features *features;
int tool[2];
+ int id[2];
__u32 serial[2];
char phys[32];
};
@@ -136,7 +143,7 @@ static void wacom_pl_irq(struct urb *urb
struct wacom *wacom = urb->context;
unsigned char *data = wacom->data;
struct input_dev *dev = wacom->dev;
- int prox, pressure;
+ int prox, pressure, id;
int retval;

switch (urb->status) {
@@ -163,6 +170,7 @@ static void wacom_pl_irq(struct urb *urb

input_regs(dev, regs);

+ id = ERASER_DEVICE_ID;
if (prox) {

pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
@@ -177,11 +185,15 @@ static void wacom_pl_irq(struct urb *urb
* an out of proximity for previous tool then a in for new tool.
*/
if (!wacom->tool[0]) {
- /* Going into proximity select tool */
- wacom->tool[1] = (data[4] & 0x20)? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+ /* Eraser bit set for DTF */
+ if (data[1] & 0x10)
+ wacom->tool[1] = BTN_TOOL_RUBBER;
+ else
+ /* Going into proximity select tool */
+ wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
} else {
/* was entered with stylus2 pressed */
- if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20) ) {
+ if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) {
/* report out proximity for previous tool */
input_report_key(dev, wacom->tool[1], 0);
input_sync(dev);
@@ -192,8 +204,9 @@ static void wacom_pl_irq(struct urb *urb
if (wacom->tool[1] != BTN_TOOL_RUBBER) {
/* Unknown tool selected default to pen tool */
wacom->tool[1] = BTN_TOOL_PEN;
+ id = STYLUS_DEVICE_ID;
}
- input_report_key(dev, wacom->tool[1], prox); /* report in proximity for tool */
+ input_report_key(dev, wacom->tool[1], id); /* report in proximity for tool */
input_report_abs(dev, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
input_report_abs(dev, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
input_report_abs(dev, ABS_PRESSURE, pressure);
@@ -250,10 +263,10 @@ static void wacom_ptu_irq(struct urb *ur

input_regs(dev, regs);
if (data[1] & 0x04) {
- input_report_key(dev, BTN_TOOL_RUBBER, data[1] & 0x20);
+ input_report_key(dev, BTN_TOOL_RUBBER, (data[1] & 0x20) ? ERASER_DEVICE_ID : 0);
input_report_key(dev, BTN_TOUCH, data[1] & 0x08);
} else {
- input_report_key(dev, BTN_TOOL_PEN, data[1] & 0x20);
+ input_report_key(dev, BTN_TOOL_PEN, (data[1] & 0x20) ? STYLUS_DEVICE_ID : 0);
input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
}
input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[2]));
@@ -299,7 +312,7 @@ static void wacom_penpartner_irq(struct
}

input_regs(dev, regs);
- input_report_key(dev, BTN_TOOL_PEN, 1);
+ input_report_key(dev, BTN_TOOL_PEN, STYLUS_DEVICE_ID);
input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[1]));
input_report_abs(dev, ABS_Y, le16_to_cpu(*(__le16 *) &data[3]));
input_report_abs(dev, ABS_PRESSURE, (signed char)data[6] + 127);
@@ -319,7 +332,7 @@ static void wacom_graphire_irq(struct ur
struct wacom *wacom = urb->context;
unsigned char *data = wacom->data;
struct input_dev *dev = wacom->dev;
- int x, y;
+ int x, y, id, rw;
int retval;

switch (urb->status) {
@@ -344,6 +357,7 @@ static void wacom_graphire_irq(struct ur

input_regs(dev, regs);

+ id = STYLUS_DEVICE_ID;
if (data[1] & 0x10) { /* in prox */

switch ((data[1] >> 5) & 3) {
@@ -354,18 +368,27 @@ static void wacom_graphire_irq(struct ur

case 1: /* Rubber */
wacom->tool[0] = BTN_TOOL_RUBBER;
+ id = ERASER_DEVICE_ID;
break;

case 2: /* Mouse with wheel */
input_report_key(dev, BTN_MIDDLE, data[1] & 0x04);
- input_report_rel(dev, REL_WHEEL, (signed char) data[6]);
+ if (wacom->features->type == G4) {
+ rw = data[7] & 0x04 ? -(data[7] & 0x03) : (data[7] & 0x03);
+ input_report_rel(dev, REL_WHEEL, rw);
+ } else
+ input_report_rel(dev, REL_WHEEL, (signed char) data[6]);
/* fall through */

case 3: /* Mouse without wheel */
wacom->tool[0] = BTN_TOOL_MOUSE;
+ id = CURSOR_DEVICE_ID;
input_report_key(dev, BTN_LEFT, data[1] & 0x01);
input_report_key(dev, BTN_RIGHT, data[1] & 0x02);
- input_report_abs(dev, ABS_DISTANCE, data[7]);
+ if (wacom->features->type == G4)
+ input_report_abs(dev, ABS_DISTANCE, data[6]);
+ else
+ input_report_abs(dev, ABS_DISTANCE, data[7]);
break;
}
}
@@ -376,16 +399,50 @@ static void wacom_graphire_irq(struct ur
input_report_abs(dev, ABS_X, x);
input_report_abs(dev, ABS_Y, y);
if (wacom->tool[0] != BTN_TOOL_MOUSE) {
- input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
+ input_report_abs(dev, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8));
input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
input_report_key(dev, BTN_STYLUS2, data[1] & 0x04);
}
}

- input_report_key(dev, wacom->tool[0], data[1] & 0x10);
+ input_report_key(dev, wacom->tool[0], (data[1] & 0x10) ? id : 0);
input_sync(dev);

+ /* send pad data */
+ if (wacom->features->type == G4) {
+ /* fist time sending pad data */
+ if (wacom->tool[1] != BTN_TOOL_FINGER) {
+ wacom->id[1] = 0;
+ wacom->serial[1] = (data[7] & 0x38) >> 2;
+ }
+ if (data[7] & 0xf8) {
+ input_report_key(dev, BTN_0, (data[7] & 0x40));
+ input_report_key(dev, BTN_4, (data[7] & 0x80));
+ if (((data[7] & 0x38) >> 2) == (wacom->serial[1] & 0x0e))
+ /* alter REL_WHEEL value so X apps can get it */
+ wacom->serial[1] += (wacom->serial[1] & 0x01) ? -1 : 1;
+ else
+ wacom->serial[1] = (data[7] & 0x38 ) >> 2;
+
+ /* don't alter the value when there is no wheel event */
+ if (wacom->serial[1] == 1)
+ wacom->serial[1] = 0;
+ rw = wacom->serial[1];
+ rw = (rw & 0x08) ? -(rw & 0x07) : (rw & 0x07);
+ input_report_rel(dev, REL_WHEEL, rw);
+ wacom->tool[1] = BTN_TOOL_FINGER;
+ wacom->id[1] = data[7] & 0xf8;
+ input_report_key(dev, wacom->tool[1], 0xf0);
+ input_event(dev, EV_MSC, MSC_SERIAL, 0xf0);
+ } else if (wacom->id[1]) {
+ wacom->id[1] = 0;
+ wacom->serial[1] = 0;
+ input_report_key(dev, wacom->tool[1], 0);
+ input_event(dev, EV_MSC, MSC_SERIAL, 0xf0);
+ }
+ input_sync(dev);
+ }
exit:
retval = usb_submit_urb (urb, GFP_ATOMIC);
if (retval)
@@ -410,7 +467,8 @@ static int wacom_intuos_inout(struct urb
(data[4] << 20) + (data[5] << 12) +
(data[6] << 4) + (data[7] >> 4);

- switch ((data[2] << 4) | (data[3] >> 4)) {
+ wacom->id[idx] = (data[2] << 4) | (data[3] >> 4);
+ switch (wacom->id[idx]) {
case 0x812: /* Inking pen */
case 0x801: /* Intuos3 Inking pen */
case 0x012:
@@ -458,7 +516,7 @@ static int wacom_intuos_inout(struct urb
default: /* Unknown tool */
wacom->tool[idx] = BTN_TOOL_PEN;
}
- input_report_key(dev, wacom->tool[idx], 1);
+ input_report_key(dev, wacom->tool[idx], wacom->id[idx]);
input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
input_sync(dev);
return 1;
@@ -637,7 +695,7 @@ static void wacom_intuos_irq(struct urb
}
}

- input_report_key(dev, wacom->tool[idx], 1);
+ input_report_key(dev, wacom->tool[idx], wacom->id[idx]);
input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
input_sync(dev);

@@ -655,6 +713,13 @@ static struct wacom_features wacom_featu
{ "Wacom Graphire2 5x7", 8, 13918, 10206, 511, 32, GRAPHIRE, wacom_graphire_irq },
{ "Wacom Graphire3", 8, 10208, 7424, 511, 32, GRAPHIRE, wacom_graphire_irq },
{ "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 32, GRAPHIRE, wacom_graphire_irq },
+ { "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 32, G4, wacom_graphire_irq },
+ { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 32, G4, wacom_graphire_irq },
+ { "Wacom Volito", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq },
+ { "Wacom PenStation2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_graphire_irq },
+ { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq },
+ { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 32, GRAPHIRE, wacom_graphire_irq },
+ { "Wacom PenPartner2", 8, 3250, 2320, 255, 32, GRAPHIRE, wacom_graphire_irq },
{ "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_intuos_irq },
{ "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq },
{ "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_intuos_irq },
@@ -666,16 +731,20 @@ static struct wacom_features wacom_featu
{ "Wacom PL600SX", 8, 6260, 5016, 255, 32, PL, wacom_pl_irq },
{ "Wacom PL550", 8, 6144, 4608, 511, 32, PL, wacom_pl_irq },
{ "Wacom PL800", 8, 7220, 5780, 511, 32, PL, wacom_pl_irq },
+ { "Wacom PL700", 8, 6758, 5406, 511, 32, PL, wacom_pl_irq },
+ { "Wacom PL510", 8, 6282, 4762, 511, 32, PL, wacom_pl_irq },
+ { "Wacom PL710", 8, 34080, 27660, 511, 32, PL, wacom_pl_irq },
+ { "Wacom DTF720", 8, 6858, 5506, 511, 32, PL, wacom_pl_irq },
+ { "Wacom Cintiq Partner",8, 20480, 15360, 511, 32, PL, wacom_ptu_irq },
{ "Wacom Intuos2 4x5", 10, 12700, 10600, 1023, 15, INTUOS, wacom_intuos_irq },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq },
{ "Wacom Intuos2 9x12", 10, 30480, 24060, 1023, 15, INTUOS, wacom_intuos_irq },
{ "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 15, INTUOS, wacom_intuos_irq },
{ "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 15, INTUOS, wacom_intuos_irq },
- { "Wacom Volito", 8, 5104, 3712, 511, 32, GRAPHIRE, wacom_graphire_irq },
- { "Wacom Cintiq Partner",8, 20480, 15360, 511, 32, PL, wacom_ptu_irq },
{ "Wacom Intuos3 4x5", 10, 25400, 20320, 1023, 15, INTUOS3, wacom_intuos_irq },
{ "Wacom Intuos3 6x8", 10, 40640, 30480, 1023, 15, INTUOS3, wacom_intuos_irq },
{ "Wacom Intuos3 9x12", 10, 60960, 45720, 1023, 15, INTUOS3, wacom_intuos_irq },
+ { "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 15, INTUOS3, wacom_intuos_irq },
{ "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 15, CINTIQ, wacom_intuos_irq },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 15, INTUOS, wacom_intuos_irq },
{ }
@@ -688,6 +757,13 @@ static struct usb_device_id wacom_ids[]
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x12) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x13) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x15) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) },
@@ -699,16 +775,20 @@ static struct usb_device_id wacom_ids[]
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x33) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x34) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x35) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x43) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x44) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x45) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
- { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
{ }
@@ -779,6 +859,13 @@ static int wacom_probe(struct usb_interf
input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom->features->pressure_max, 0, 0);

switch (wacom->features->type) {
+ case G4:
+ input_dev->evbit[0] |= BIT(EV_MSC);
+ input_dev->mscbit[0] |= BIT(MSC_SERIAL);
+ input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
+ input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
+ /* fall through */
+
case GRAPHIRE:
input_dev->evbit[0] |= BIT(EV_REL);
input_dev->relbit[0] |= BIT(REL_WHEEL);

--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/