Re: Update on Timer Frequencies

[Steven Rostedt]

On Mon, 2005-11-07 at 22:26 -0500, AndyLiebman@xxxxxxx wrote:
> >Your system looks pretty much interrupt driven, and I would assume  that
> >all these are of same importance.  So I would actually  recommend the
> >vanilla kernel, with HZ=100 and preemption turned  off.
> 
> Hi Steve, 
> 
> I thought I would update you (and those on the  list who care) about my real 
> world experience comparing the 2.6.14 kernel  compiled with the timer 
> frequency set to 100 versus 1000. 
>  
> If you recall, I'm running a video server that is taking in and sending out  
> a large number of streams of video and audio clips that range in data rates 
> from  3.8 to 28 MB/sec. 
>  
> We have a benchmark test that we developed that simulates multiple  
> non-linear video editing workstations playing back sequences of video each from  their 
> own timeline. We developed this test mostly to tune our storage subsystem,  so 
> it's not a perfect test to evaluate timer frequencies (because it doesn't  
> involve any network traffic). 

So the server would just be handling data for other machines on a
network?  There may be clashes between the scripts and the services.
Could you run scripts on another machine that communicates to the server
and do your benchmarks that way?

>  
> Each test is really a sequence of scripts that a) run dd on a  trio of one 
> video and two audio files and b) move on to the next script  until all scripts 
> have been executed, each time reading data from the RAIDS and  writing the data 
> to /dev/null until 21 clips worth of data have been read. We do  this in 
> parallel 5, 6, 10, 15 times to simulate that same number of workstations  calling 
> for data simultaneously. 

I wonder what the over head is of these.  Could you post numbers running
these scripts under the time command?  So something like "time dd
if=audio_whatever of=/dev/null"


>  
> The test is an approximate simulation of video  editing workstations playing 
> back unique sequences of 21 clips that each  range in length from 3 to 5 
> seconds and that run at a rate of 18 MB/sec video  (which is roughly 8-bit 
> uncompressed standard definition). 
>  
> The test puts extreme stress on our RAID subsystem -- forcing drives to  seek 
> all over the place to play back these random clips (think of each sequence  
> as a little 90 second story with 21 separate shots). 
>  
> After conducting many tests over the weekend, we concluded that the tests  
> consistently took 6 percent longer to complete when running under a kernel  
> compiled with the 100 hz timer versus an identical kernel compiled with a 1000  hz 
> timer. 
>  
> Again, I realize this isn't a perfect simulation of what our server does in  
> real life; we weren't moving data over a network -- thus there were no  NIC 
> card interrupts involved, no samba or netatalk work taking place, and  instead 
> all of our scripts and dd commands are running on the server. 

I still wouldn't trust those tests.  Try something like netcat (nc) from
another machine and see how it compares.  Although that would still be a
crude test.

>  
> Still, the results are interesting. That plus the fact that our "user  
> management applications" open and run excruciatingly slowly when the timer  
> frequency is 100 versus 1000 (3 x longer to open the application) is making us  stick 
> with a timer frequency of 1000 for now. 

Are there other services running when you open these applications?  If
not, then this would not make sense.  But if other services where not
active when these applications are being opened, I'd be surprised at
these numbers.

The time slice algorithm in the scheduler is pretty complex. Not the
implementation, but the assigning of time slices and the dynamic nature
of them.  I wonder if a lower HZ would cause more schedules?  I'll have
to test this out tomorrow and see what I get in scheduling frequencies
between the two.

>  
> Thanks again for your help. I'm sorry if I offended anyone on this list by  
> writing from an AOL address. 

I'm sure they'll get over it ;-)

-- Steve


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/