[patch 4/4] pci: call pci_read_irq for bridges

[Kristen Accardi]

Call pci_read_irq() for bridges too, this ensures that the pin
value is stored for later use for bridges that require interrupts.

 drivers/pci/probe.c |    1 +
 1 files changed, 1 insertion(+)

Index: linux-2.6.13/drivers/pci/probe.c
===================================================================
--- linux-2.6.13.orig/drivers/pci/probe.c
+++ linux-2.6.13/drivers/pci/probe.c
@@ -624,6 +624,7 @@ static int pci_setup_device(struct pci_d
 		/* The PCI-to-PCI bridge spec requires that subtractive
 		   decoding (i.e. transparent) bridge must have programming
 		   interface code of 0x01. */ 
+		pci_read_irq(dev);
 		dev->transparent = ((dev->class & 0xff) == 1);
 		pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
 		break;

--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/