Re: Status of Marvell SATA driver (was Re: Trying latest sata_mv - and getting freeze)

[Jens Axboe]

On Wed, Oct 26 2005, Eugene Crosser wrote:
> Brett, thanks for quick response.
> 
> >> My hardware is SMP Supermicro with 6 disks on
> >> Marvell MV88SX6081 8-port SATA II PCI-X Controller (rev 03)
> >> and the sata_mv.c is version 0.25 dated 22 Oct 2005
> >>
> >> The thing works with "old" mvsata340 driver, but the "new" kernel with
> >> your driver freezes when it starts to probe disks.  Even Magic SysRq
> >> does not work.  The last lines I see on screen are like this:
> >>
> >> sata_mv version 0.25
> >> ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 56 (level, low) -> IRQ 185
> >> sata_mv(0000:02:03.0) 32 slots 8 ports unknown mode IRQ via MSI
> >> ata1: SATA max UDMA/133 cmd 0x0 ctl 0xF8C22120 bmdma 0x0 irq 185
> >> ata2: .... <same things>            0xF8C24120 ...
> >> ...
> >> ata8: .... <same thing>             0xF8C38120 ...
> >> ATA: abnormal status 0x80 on port 0xF8C2211C
> >> ... <five more lines identical to the above>
> >> ata1: dev 0 ATA-7, max UDMA/133, 781422768 sectors: LBA48
> >>
> >> - and at this point it freezes hard.
> >> Any suggestions for me?  Any information I can collect to help
> >> troubleshooting?
> [...]
> > In the meantime, try turning off SMP and seeing if that makes a
> > difference.  There still might be a problem with the spinlocks and if so
> > it should go away in uniprocessor mode.
> 
> 'nosmp' makes no difference.

Booting with nosmp isn't enough, you need to compile the kernel with
CONFIG_SMP turned off. Otherwise the spinlocks will still be used and
could cause a hard hang.

-- 
Jens Axboe

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/