Continuing PCI and Yenta troubles in 2.6.13.1 and 2.6.14-rc1
From: Andreas Koch
Date: Tue Sep 20 2005 - 05:03:36 EST
Ivan,
I backported your Yenta fix into 2.6.13.1 (that's what I am currently using on
my production machine). However, the reliability of this setup is
significantly decreased over my previous 2.6.12-rc6+your PCI patches
configuration.
Specifically, the machine (Acer TM8104 notebook+ezDock docking station) now
often hangs (without an oops), sometimes during startup, sometimes a bit
later during use.
I have attached a console log of a successful start (ok26131.log), where the
machine lost access to the USB ports on the docking station (behind the PCI
Express/PCI bridge) later during normal use. I note that there are quite a
few more errors concerning the bridge initialization (compared to
2.6.12-rc6).
I attach a second log (stop26131.log) where the machine hangs during booting
in Yenta initialization.
I have also made an attempt to use 2.6.14-rc1 with your fix. However, two
things occur here: First, the machine is extremely unresponsive right after
booting (console input echoed with the speed of a 75 baud terminal [at
best ...]). Second, after some time, the USB ports in the docking station
disappear (with a message indicating PCI problems).
Thus, I believe there is still something rotten in the PCI code since the
2.6.12-rc6 days. Again, if you'd like me to run specific tests, please let me
know.
Andreas
Linux version 2.6.13.1 (root@meneldor) (gcc version 3.3.6 (Gentoo 3.3.6, ssp-3.3.6-1.0, pie-8.7.8)) #2 Sat Sep 17 00:09:25 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe80000 (usable)
BIOS-e820: 000000007fe80000 - 000000007fe89000 (ACPI data)
BIOS-e820: 000000007fe89000 - 000000007ff00000 (ACPI NVS)
BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
DMI present.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec20000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode: Flat. Using 2 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0x0
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
Built 1 zonelists
Kernel command line: root=/dev/ram0 lvm2root=/dev/vg0/root console=ttyS0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1995.189 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2069032k/2095616k available (3582k kernel code, 25336k reserved, 1602k data, 216k init, 1178112k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3997.36 BogoMIPS (lpj=7994736)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 2107k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd6ce, last bus=8
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050408
ACPI-0362: *** Error: Looking up [Z00G] in namespace, AE_NOT_FOUND
search_node dfdc7140 start_node dfdc7140 return_node 00000000
ACPI-0362: *** Error: Looking up [Z00G] in namespace, AE_NOT_FOUND
search_node dfdc7d80 start_node dfdc7d80 return_node 00000000
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Embedded Controller [EC0] (gpe 29)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 7 of bridge 0000:02:00.0
PCI: Cannot allocate resource region 8 of bridge 0000:02:00.0
PCI: Cannot allocate resource region 4 of device 0000:03:02.0
PCI: Cannot allocate resource region 4 of device 0000:03:02.1
PCI: Cannot allocate resource region 0 of device 0000:03:02.2
PCI: Cannot allocate resource region 4 of device 0000:03:03.0
PCI: Cannot allocate resource region 4 of device 0000:03:03.1
PCI: Cannot allocate resource region 0 of device 0000:03:03.2
PCI: Cannot allocate resource region 0 of device 0000:03:04.0
PCI: Cannot allocate resource region 1 of device 0000:03:04.0
PCI: Cannot allocate resource region 0 of device 0000:03:05.0
PCI: Cannot allocate resource region 0 of device 0000:03:06.0
PCI: Device 0000:02:00.0 not found by BIOS
PCI: BIOS reporting unknown device 03:10
PCI: Device 0000:03:02.1 not found by BIOS
PCI: Device 0000:03:02.2 not found by BIOS
PCI: BIOS reporting unknown device 03:10
PCI: Device 0000:03:03.1 not found by BIOS
PCI: Device 0000:03:03.2 not found by BIOS
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: c8100000-c81fffff
PREFETCH window: d0000000-d7ffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Error while updating region 0000:03:04.0/1 (86000000 != ffffffff)
PCI: Error while updating region 0000:03:05.0/0 (86004000 != 86000000)
PCI: Error while updating region 0000:03:04.0/0 (86005000 != 86004000)
PCI: Error while updating region 0000:03:02.2/0 (86005800 != 86005000)
PCI: Error while updating region 0000:03:03.2/0 (86005900 != 86005800)
PCI: Error while updating region 0000:03:06.0/0 (00005001 != 86005900)
PCI: Error while updating region 0000:03:02.0/4 (00005041 != 00005001)
PCI: Error while updating region 0000:03:02.1/4 (00005061 != 00005041)
PCI: Error while updating region 0000:03:03.0/4 (00005081 != 00005061)
PCI: Error while updating region 0000:03:03.1/4 (000050a1 != 00005081)
PCI: Bus 4, cardbus bridge: 0000:03:05.0
IO window: 00003000-00003fff
IO window: 00004000-00004fff
PREFETCH window: 80000000-81ffffff
MEM window: 84000000-85ffffff
PCI: Bridge: 0000:02:00.0
IO window: 3000-5fff
MEM window: 84000000-86ffffff
PREFETCH window: 80000000-81ffffff
PCI: Bridge: 0000:00:1c.2
IO window: 3000-5fff
MEM window: 84000000-86ffffff
PREFETCH window: 80000000-81ffffff
PCI: Bus 7, cardbus bridge: 0000:06:09.0
IO window: 00006000-00006fff
IO window: 00007000-00007fff
PREFETCH window: 82000000-83ffffff
MEM window: 88000000-89ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 6000-7fff
MEM window: c8400000-c84fffff
PREFETCH window: 82000000-83ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Device 0000:00:1c.0 not available because of resource collisions
PCI: Device 0000:00:1c.1 not available because of resource collisions
PCI: Enabling device 0000:00:1c.2 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17
PCI: Enabling device 0000:02:00.0 (0044 -> 0047)
ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 18 (level, low) -> IRQ 17
Simple Boot Flag at 0x36 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1126918658.388:1): initialized
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
NTFS driver 2.1.23 [Flags: R/O].
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pciehp: add_host_bridge: status 5
pciehp: Fails to gain control of native hot-plug
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
assign_interrupt_mode Found MSI capability
PCI: Device 0000:00:1c.0 not available because of resource collisions
PCI: Device 0000:00:1c.1 not available because of resource collisions
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17
assign_interrupt_mode Found MSI capability
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Battery Slot [BAT2] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (57 C)
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@xxxxxxx) and petero2@xxxxxxxxx
tg3.c:v3.37 (August 25, 2005)
ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 16 (level, low) -> IRQ 16
eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:75:57:33
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[763f0000]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6M: IDE controller at PCI slot 0000:00:1f.2
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
ICH6M: chipset revision 4
ICH6M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x18a0-0x18a7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x18a8-0x18af, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK1032GAX, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: HL-DT-ST DVDRAM GMA-4080N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 195371568 sectors (100030 MB), CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ohci1394: $Rev: 1299 $ Ben Collins <bcollins@xxxxxxxxxx>
PCI: Enabling device 0000:03:04.0 (0044 -> 0046)
ohci1394: Failed to allocate shared interrupt 255
ohci1394: probe of 0000:03:04.0 failed with error -12
ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 19 (level, low) -> IRQ 18
ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[c8415000-c84157ff] Max Packet=[2048]
ieee1394: raw1394: /dev/raw1394 device initialized
sbp2: $Rev: 1306 $ Ben Collins <bcollins@xxxxxxxxxx>
PCI: Enabling device 0000:03:05.0 (00a0 -> 00a3)
Yenta: CardBus bridge found at 0000:03:05.0 [104c:ac50]
Yenta: adjusting diagnostic: 03 -> 63
Yenta: Enabling burst memory read transactions
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to ISA
Yenta TI: socket 0000:03:05.0, mfunc 0x636602c0, devctl 0x52
Yenta: request_irq() in yenta_probe_cb_irq() failed!
Yenta TI: socket 0000:03:05.0 no PCI interrupts. Fish. Please report.
Yenta: no PCI IRQ, CardBus support disabled for this socket.
Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.
Yenta: ISA IRQ mask 0x0000, PCI irq 0
Socket status: ffffffff
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x5fff
pcmcia: parent PCI bridge Memory window: 0x84000000 - 0x86ffffff
pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x81ffffff
ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 18 (level, low) -> IRQ 17
Yenta: CardBus bridge found at 0000:06:09.0 [1025:0070]
Yenta O2: res at 0x94/0xD4: ff/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0438, PCI irq 17
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x6000 - 0x7fff
pcmcia: parent PCI bridge Memory window: 0xc8400000 - 0xc84fffff
pcmcia: parent PCI bridge Memory window: 0x82000000 - 0x83ffffff
Yenta: no bus associated with 0000:06:09.1!
Yenta: no bus associated with 0000:06:09.3!
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xc8004000
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
PCI: Enabling device 0000:03:02.2 (0080 -> 0082)
PCI: Via IRQ fixup for 0000:03:02.2, from 255 to 15
ehci_hcd 0000:03:02.2: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:03:02.2: illegal capability!
ehci_hcd 0000:03:02.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:03:02.2: request interrupt 255 failed
ehci_hcd 0000:03:02.2: USB bus 2 deregistered
ehci_hcd 0000:03:02.2: init 0000:03:02.2 fail, -22
ehci_hcd: probe of 0000:03:02.2 failed with error -22
PCI: Via IRQ fixup for 0000:03:03.2, from 255 to 15
ehci_hcd 0000:03:03.2: VIA Technologies, Inc. USB 2.0 (#2)
ehci_hcd 0000:03:03.2: illegal capability!
ehci_hcd 0000:03:03.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:03:03.2: request interrupt 255 failed
ehci_hcd 0000:03:03.2: USB bus 2 deregistered
ehci_hcd 0000:03:03.2: init 0000:03:03.2 fail, -22
ehci_hcd: probe of 0000:03:03.2 failed with error -22
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001820
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 17, io base 0x00001840
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PCI: Via IRQ fixup for 0000:03:02.0, from 255 to 15
uhci_hcd 0000:03:02.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:03:02.0: HCRESET not completed yet!
uhci_hcd 0000:03:02.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:03:02.0: request interrupt 255 failed
uhci_hcd 0000:03:02.0: USB bus 6 deregistered
uhci_hcd 0000:03:02.0: init 0000:03:02.0 fail, -22
uhci_hcd: probe of 0000:03:02.0 failed with error -22
PCI: Via IRQ fixup for 0000:03:02.1, from 255 to 15
uhci_hcd 0000:03:02.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:03:02.1: HCRESET not completed yet!
uhci_hcd 0000:03:02.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:03:02.1: request interrupt 255 failed
uhci_hcd 0000:03:02.1: USB bus 6 deregistered
uhci_hcd 0000:03:02.1: init 0000:03:02.1 fail, -22
uhci_hcd: probe of 0000:03:02.1 failed with error -22
PCI: Via IRQ fixup for 0000:03:03.0, from 255 to 15
uhci_hcd 0000:03:03.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
uhci_hcd 0000:03:03.0: HCRESET not completed yet!
uhci_hcd 0000:03:03.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:03:03.0: request interrupt 255 failed
uhci_hcd 0000:03:03.0: USB bus 6 deregistered
uhci_hcd 0000:03:03.0: init 0000:03:03.0 fail, -22
uhci_hcd: probe of 0000:03:03.0 failed with error -22
PCI: Via IRQ fixup for 0000:03:03.1, from 255 to 15
uhci_hcd 0000:03:03.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
uhci_hcd 0000:03:03.1: HCRESET not completed yet!
uhci_hcd 0000:03:03.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:03:03.1: request interrupt 255 failed
uhci_hcd 0000:03:03.1: USB bus 6 deregistered
uhci_hcd 0000:03:03.1: init 0000:03:03.1 fail, -22
uhci_hcd: probe of 0000:03:03.1 failed with error -22
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
usbcore: registered new driver auerswald
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 212 bytes per conntrack
input: AT Translated Set 2 keyboard on isa0060/serio0
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@xxxxxxxxxxx>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
AZAL RP01 RP02 RP04 USB1 USB2 USB3 USB4 USB7 LANC
ACPI: (supports S0 S3 S4 S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 216k freed
initrd: Remounting / read/write
mount: /etc/mtab: No such file Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
or directory
ininput: SynPS/2 Synaptics TouchPad on isa0060/serio4
itrd: Mounting /proc
initrd: Finding device mapper major and minor numbers (10,62)
initrd: Activating LVM2 volumes
4 logical volume(s) in volume group "vg0" now active
initrd: Checking root filesystem /dev/vg0/root
WARNING: couldn't open /etc/fstab: No such file or directory
Reiserfs super block in block 16 on 0xfd00 of format 3.6 with standard journal
Blocks (total/free): 5367808/1513945 by 4096 bytes
Filesystem is NOT clean
Replaying journal..
Trans replayed: mountid 299, transid 265186, desc 610, len 28, commit 639, next trans offset 622
Trans replayed: mountid 299, transid 265187, desc 640, len 28, commit 669, next trans offset 652
Trans replayed: mountid 299, transid 265188, desc 670, len 30, commit 701, next trans offset 684
Reiserfs journal '/dev/vg0/root' in blocks [18..8211]: 3 transactions replayed
Checking internal tree..finished
ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
initrd: MountingReiserFS: dm-0: using ordered data mode
root filesystemReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
/dev/vg0/root rReiserFS: dm-0: checking transaction log (dm-0)
w
ReiserFS: dm-0: Using r5 hash to sort names
initrd: Copying node for device mapper (/dev/mapper/control)
initrd: Moving /proc to /rootvol/proc
initrd: Changing roots
initrd: Making device nodes in lvm root fs
initrd: Unmounting /proc
initrd: Remounting lvm root fs readonly
initrd: Proceeding with boot...
INIT: version 2.86 booting
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2005 Gentoo Foundation; Distributed under the GPLv2
Linux version 2.6.13.1 (root@meneldor) (gcc version 3.3.6 (Gentoo 3.3.6, ssp-3.3.6-1.0, pie-8.7.8)) #2 Sat Sep 17 00:09:25 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe80000 (usable)
BIOS-e820: 000000007fe80000 - 000000007fe89000 (ACPI data)
BIOS-e820: 000000007fe89000 - 000000007ff00000 (ACPI NVS)
BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
DMI present.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec20000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode: Flat. Using 2 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0x0
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
Built 1 zonelists
Kernel command line: root=/dev/ram0 lvm2root=/dev/vg0/root console=ttyS0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1995.367 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2069032k/2095616k available (3582k kernel code, 25336k reserved, 1602k data, 216k init, 1178112k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3997.42 BogoMIPS (lpj=7994840)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 2107k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd6ce, last bus=8
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050408
ACPI-0362: *** Error: Looking up [Z00G] in namespace, AE_NOT_FOUND
search_node dfdc7140 start_node dfdc7140 return_node 00000000
ACPI-0362: *** Error: Looking up [Z00G] in namespace, AE_NOT_FOUND
search_node dfdc7d80 start_node dfdc7d80 return_node 00000000
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Embedded Controller [EC0] (gpe 29)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 7 of bridge 0000:02:00.0
PCI: Cannot allocate resource region 8 of bridge 0000:02:00.0
PCI: Cannot allocate resource region 4 of device 0000:03:02.0
PCI: Cannot allocate resource region 4 of device 0000:03:02.1
PCI: Cannot allocate resource region 0 of device 0000:03:02.2
PCI: Cannot allocate resource region 4 of device 0000:03:03.0
PCI: Cannot allocate resource region 4 of device 0000:03:03.1
PCI: Cannot allocate resource region 0 of device 0000:03:03.2
PCI: Cannot allocate resource region 0 of device 0000:03:04.0
PCI: Cannot allocate resource region 1 of device 0000:03:04.0
PCI: Cannot allocate resource region 0 of device 0000:03:05.0
PCI: Cannot allocate resource region 0 of device 0000:03:06.0
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: c8100000-c81fffff
PREFETCH window: d0000000-d7ffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bus 4, cardbus bridge: 0000:03:05.0
IO window: 00003000-00003fff
IO window: 00004000-00004fff
PREFETCH window: 80000000-81ffffff
MEM window: 84000000-85ffffff
PCI: Bridge: 0000:02:00.0
IO window: 3000-5fff
MEM window: 84000000-86ffffff
PREFETCH window: 80000000-81ffffff
PCI: Bridge: 0000:00:1c.2
IO window: 3000-5fff
MEM window: 84000000-86ffffff
PREFETCH window: 80000000-81ffffff
PCI: Bus 7, cardbus bridge: 0000:06:09.0
IO window: 00006000-00006fff
IO window: 00007000-00007fff
PREFETCH window: 82000000-83ffffff
MEM window: 88000000-89ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 6000-7fff
MEM window: c8400000-c84fffff
PREFETCH window: 82000000-83ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Device 0000:00:1c.0 not available because of resource collisions
PCI: Device 0000:00:1c.1 not available because of resource collisions
PCI: Enabling device 0000:00:1c.2 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 31 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 18 (level, low) -> IRQ 17
Simple Boot Flag at 0x36 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1126916686.848:1): initialized
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
NTFS driver 2.1.23 [Flags: R/O].
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pciehp: add_host_bridge: status 5
pciehp: Fails to gain control of native hot-plug
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
assign_interrupt_mode Found MSI capability
PCI: Device 0000:00:1c.0 not available because of resource collisions
PCI: Device 0000:00:1c.1 not available because of resource collisions
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17
assign_interrupt_mode Found MSI capability
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Battery Slot [BAT2] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (57 C)
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 32 (level, low) -> IRQ 19
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@xxxxxxx) and petero2@xxxxxxxxx
tg3.c:v3.37 (August 25, 2005)
ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 16 (level, low) -> IRQ 16
eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:75:57:33
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[763f0000]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6M: IDE controller at PCI slot 0000:00:1f.2
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
ICH6M: chipset revision 4
ICH6M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x18a0-0x18a7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x18a8-0x18af, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK1032GAX, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: HL-DT-ST DVDRAM GMA-4080N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 195371568 sectors (100030 MB), CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ohci1394: $Rev: 1299 $ Ben Collins <bcollins@xxxxxxxxxx>
ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 30 (level, low) -> IRQ 21
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[86005000-860057ff] Max Packet=[2048]
ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 19 (level, low) -> IRQ 20
ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[c8415000-c84157ff] Max Packet=[2048]
ieee1394: raw1394: /dev/raw1394 device initialized
sbp2: $Rev: 1306 $ Ben Collins <bcollins@xxxxxxxxxx>
ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 31 (level, low) -> IRQ 18
Yenta: CardBus bridge found at 0000:03:05.0 [104c:ac50]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:03:05.0, mfunc 0x00521d22, devctl 0x66
Yenta: ISA IRQ mask 0x0000, PCI irq 18
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x5fff
pcmcia: parent PCI bridge Memory window: 0x84000000 - 0x86ffffff
pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x81ffffff
ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 18 (level, low) -> IRQ 17
Yenta: CardBus bridge found at 0000:06:09.0 [1025:0070]
Yenta O2: res at 0x94/0xD4: ff/00
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0438, PCI irq 17
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x6000 - 0x7fff
pcmcia: parent PCI bridge Memory window: 0xc8400000 - 0xc84fffff
pcmcia: parent PCI bridge Memory window: 0x82000000 - 0x83ffffff
Linux version 2.6.14-rc1 (root@meneldor) (gcc version 3.3.6 (Gentoo 3.3.6, ssp-3.3.6-1.0, pie-8.7.8)) #1 Sat Sep 17 01:30:03 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe80000 (usable)
BIOS-e820: 000000007fe80000 - 000000007fe89000 (ACPI data)
BIOS-e820: 000000007fe89000 - 000000007ff00000 (ACPI NVS)
BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
DMI present.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec20000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec20000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode: Flat. Using 2 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0x0
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Built 1 zonelists
Kernel command line: root=/dev/ram0 lvm2root=/dev/vg0/root console=ttyS0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1995.366 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2069292k/2095616k available (3608k kernel code, 25076k reserved, 1382k data, 220k init, 1178112k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3997.43 BogoMIPS (lpj=7994861)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking if image is initramfs...softlockup thread 0 started up.
it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 2107k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd6ce, last bus=8
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050902
ACPI-0339: *** Error: Looking up [Z00G] in namespace, AE_NOT_FOUND
search_node dfdcaa80 start_node dfdcaa80 return_node 00000000
ACPI-0339: *** Error: Looking up [Z00G] in namespace, AE_NOT_FOUND
search_node dfdcb7e0 start_node dfdcb7e0 return_node 00000000
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Embedded Controller [EC0] (gpe 29)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 7 of bridge 0000:02:00.0
PCI: Cannot allocate resource region 8 of bridge 0000:02:00.0
PCI: Cannot allocate resource region 4 of device 0000:03:02.0
PCI: Cannot allocate resource region 4 of device 0000:03:02.1
PCI: Cannot allocate resource region 0 of device 0000:03:02.2
PCI: Cannot allocate resource region 4 of device 0000:03:03.0
PCI: Cannot allocate resource region 4 of device 0000:03:03.1
PCI: Cannot allocate resource region 0 of device 0000:03:03.2
PCI: Cannot allocate resource region 0 of device 0000:03:04.0
PCI: Cannot allocate resource region 1 of device 0000:03:04.0
PCI: Cannot allocate resource region 0 of device 0000:03:05.0
PCI: Cannot allocate resource region 0 of device 0000:03:06.0
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: c8100000-c81fffff
PREFETCH window: d0000000-d7ffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bus 4, cardbus bridge: 0000:03:05.0
IO window: 00003000-00003fff
IO window: 00004000-00004fff
PREFETCH window: 88000000-89ffffff
MEM window: 8c000000-8dffffff
PCI: Bridge: 0000:02:00.0
IO window: 3000-5fff
MEM window: 8c000000-8effffff
PREFETCH window: 88000000-89ffffff
PCI: Bridge: 0000:00:1c.2
IO window: 3000-5fff
MEM window: 8c000000-8effffff
PREFETCH window: 88000000-89ffffff
PCI: Bus 7, cardbus bridge: 0000:06:09.0
IO window: 00006000-00006fff
IO window: 00007000-00007fff
PREFETCH window: 8a000000-8bffffff
MEM window: 90000000-91ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 6000-7fff
MEM window: c8400000-c84fffff
PREFETCH window: 8a000000-8bffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Device 0000:00:1c.0 not available because of resource collisions
PCI: Device 0000:00:1c.1 not available because of resource collisions
PCI: Enabling device 0000:00:1c.2 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 31 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 18 (level, low) -> IRQ 17
Simple Boot Flag at 0x36 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1126920717.448:1): initialized
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
NTFS driver 2.1.24 [Flags: R/O].
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pciehp: add_host_bridge: status 5
pciehp: Fails to gain control of native hot-plug
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
assign_interrupt_mode Found MSI capability
PCI: Device 0000:00:1c.0 not available because of resource collisions
PCI: Device 0000:00:1c.1 not available because of resource collisions
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17
assign_interrupt_mode Found MSI capability
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Battery Slot [BAT2] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (60 C)
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 32 (level, low) -> IRQ 19
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@xxxxxxx) and petero2@xxxxxxxxx
tg3.c:v3.39 (September 5, 2005)
ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 16 (level, low) -> IRQ 16
eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:75:57:33
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[763f0000]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6M: IDE controller at PCI slot 0000:00:1f.2
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
ICH6M: chipset revision 4
ICH6M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x18a0-0x18a7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x18a8-0x18af, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK1032GAX, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: HL-DT-ST DVDRAM GMA-4080N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 195371568 sectors (100030 MB), CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ohci1394: $Rev: 1299 $ Ben Collins <bcollins@xxxxxxxxxx>
ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 30 (level, low) -> IRQ 21
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[8e005000-8e0057ff] Max Packet=[2048]
ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 19 (level, low) -> IRQ 20
ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[c8415000-c84157ff] Max Packet=[2048]
ieee1394: raw1394: /dev/raw1394 device initialized
sbp2: $Rev: 1306 $ Ben Collins <bcollins@xxxxxxxxxx>
ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 31 (level, low) -> IRQ 18
Yenta: CardBus bridge found at 0000:03:05.0 [104c:ac50]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:03:05.0, mfunc 0x00521d22, devctl 0x66
Yenta: ISA IRQ mask 0x0000, PCI irq 18
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x5fff
pcmcia: parent PCI bridge Memory window: 0x8c000000 - 0x8effffff
pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x89ffffff
ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 18 (level, low) -> IRQ 17
Yenta: CardBus bridge found at 0000:06:09.0 [1025:0070]
Yenta O2: res at 0x94/0xD4: ea/00
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0c38, PCI irq 17
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x6000 - 0x7fff
pcmcia: parent PCI bridge Memory window: 0xc8400000 - 0xc84fffff
pcmcia: parent PCI bridge Memory window: 0x8a000000 - 0x8bffffff
Yenta: no bus associated with 0000:06:09.1!
Yenta: no bus associated with 0000:06:09.3!
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 22
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 22, io mem 0xc8004000
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ACPI: PCI Interrupt 0000:03:02.2[C] -> GSI 26 (level, low) -> IRQ 23
PCI: Via IRQ fixup for 0000:03:02.2, from 255 to 7
ehci_hcd 0000:03:02.2: EHCI Host Controller
ehci_hcd 0000:03:02.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:03:02.2: irq 23, io mem 0x8e005800
ehci_hcd 0000:03:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:03:03.2[C] -> GSI 29 (level, low) -> IRQ 24
PCI: Via IRQ fixup for 0000:03:03.2, from 255 to 8
ehci_hcd 0000:03:03.2: EHCI Host Controller
ehci_hcd 0000:03:03.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:03:03.2: irq 24, io mem 0x8e005900
ehci_hcd 0000:03:03.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 22, io base 0x00001800
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 17, io base 0x00001840
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 24 (level, low) -> IRQ 25
PCI: Via IRQ fixup for 0000:03:02.0, from 255 to 9
uhci_hcd 0000:03:02.0: UHCI Host Controller
uhci_hcd 0000:03:02.0: new USB bus registered, assigned bus number 8
uhci_hcd 0000:03:02.0: irq 25, io base 0x00005040
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:03:02.1[B] -> GSI 25 (level, low) -> IRQ 26
PCI: Via IRQ fixup for 0000:03:02.1, from 255 to 10
uhci_hcd 0000:03:02.1: UHCI Host Controller
uhci_hcd 0000:03:02.1: new USB bus registered, assigned bus number 9
uhci_hcd 0000:03:02.1: irq 26, io base 0x00005060
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 27 (level, low) -> IRQ 27
PCI: Via IRQ fixup for 0000:03:03.0, from 255 to 11
uhci_hcd 0000:03:03.0: UHCI Host Controller
uhci_hcd 0000:03:03.0: new USB bus registered, assigned bus number 10
uhci_hcd 0000:03:03.0: irq 27, io base 0x00005080
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:03:03.1[B] -> GSI 28 (level, low) -> IRQ 28
PCI: Via IRQ fixup for 0000:03:03.1, from 255 to 12
uhci_hcd 0000:03:03.1: UHCI Host Controller
uhci_hcd 0000:03:03.1: new USB bus registered, assigned bus number 11
usb 9-2: new low speed USB device using uhci_hcd and address 2
uhci_hcd 0000:03:03.1: irq 28, io base 0x000050a0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb 10-2: new full speed USB device using uhci_hcd and address 2
input: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:03:02.1-2
input: USB HID v1.00 Device [USB Audio] on usb-0000:03:03.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new driver auerswald
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
ip_conntrack version 2.3 (8192 buckets, 65536 max) - 216 bytes per conntrack
input: AT Translated Set 2 keyboard on isa0060/serio0
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@xxxxxxxxxxx>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
AZAL RP01 RP02 RP04 USB1 USB2 USB3 USB4 USB7 LANC
ACPI: (supports S0 S3 S4 S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 220k freed
initrd: Remounting / read/write
mount: /etc/mtab: No such file Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
or directory
ininput: SynPS/2 Synaptics TouchPad on isa0060/serio4
itrd: Mounting /proc
initrd: Finding device mapper major and minor numbers (10,62)
initrd: Activating LVM2 volumes
4 logical volume(s) in volume group "vg0" now active
initrd: Checking root filesystem /dev/vg0/root
WARNING: couldn't open /etc/fstab: No such file or directory
Reiserfs super block in block 16 on 0xfd00 of format 3.6 with standard journal
Blocks (total/free): 5367808/1425884 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/vg0/root' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished
ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
initrd: MountingReiserFS: dm-0: using ordered data mode
root filesystemReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
/dev/vg0/root rReiserFS: dm-0: checking transaction log (dm-0)
w
ReiserFS: dm-0: Using r5 hash to sort names
initrd: Copying node for device mapper (/dev/mapper/control)
initrd: Moving /proc to /rootvol/proc
initrd: Changing roots
initrd: Making device nodes in lvm root fs
initrd: Unmounting /proc
initrd: Remounting lvm root fs readonly
initrd: Proceeding with boot...
INIT: version 2.86 booting
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2005 Gentoo Foundation; Distributed under the GPLv2