[patch 2.6.13 3/5] e100: correct rx_dropped and add rx_missed_errors

From: John W. Linville
Date: Mon Sep 12 2005 - 10:07:55 EST


Do not count non-error frames dropped by the hardware as
part of rx_dropped. Instead, count those frames dropped as
rx_missed_errors. Also, do not count other error frames as part of
rx_dropped. Finally, do not count oversized frames in rx_dropped
(since they are counted as part of rx_length_errors).

Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx>
---

drivers/net/e100.c | 4 +---
1 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/e100.c b/drivers/net/e100.c
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1387,13 +1387,13 @@ static void e100_update_stats(struct nic
ns->collisions += nic->tx_collisions;
ns->tx_errors += le32_to_cpu(s->tx_max_collisions) +
le32_to_cpu(s->tx_lost_crs);
- ns->rx_dropped += le32_to_cpu(s->rx_resource_errors);
ns->rx_length_errors += le32_to_cpu(s->rx_short_frame_errors) +
nic->rx_over_length_errors;
ns->rx_crc_errors += le32_to_cpu(s->rx_crc_errors);
ns->rx_frame_errors += le32_to_cpu(s->rx_alignment_errors);
ns->rx_over_errors += le32_to_cpu(s->rx_overrun_errors);
ns->rx_fifo_errors += le32_to_cpu(s->rx_overrun_errors);
+ ns->rx_missed_errors += le32_to_cpu(s->rx_resource_errors);
ns->rx_errors += le32_to_cpu(s->rx_crc_errors) +
le32_to_cpu(s->rx_alignment_errors) +
le32_to_cpu(s->rx_short_frame_errors) +
@@ -1727,12 +1727,10 @@ static inline int e100_rx_indicate(struc

if(unlikely(!(rfd_status & cb_ok))) {
/* Don't indicate if hardware indicates errors */
- nic->net_stats.rx_dropped++;
dev_kfree_skb_any(skb);
} else if(actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) {
/* Don't indicate oversized frames */
nic->rx_over_length_errors++;
- nic->net_stats.rx_dropped++;
dev_kfree_skb_any(skb);
} else {
nic->net_stats.rx_packets++;
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/