Re: make modules Segfault

From: Randy.Dunlap
Date: Thu Aug 04 2005 - 23:20:32 EST

Next message: Dan Kegel: "re: make modules Segfault"
Previous message: Con Kolivas: "[PATCH] Timer Top tweaks"
In reply to: George Van Tuyl: "make modules Segfault"
Next in thread: Adrian Bunk: "Re: make modules Segfault"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Thu, 04 Aug 2005 21:20:22 -0600 George Van Tuyl wrote:

>
> To: linux-kernel@xxxxxxxxxxxxxxx
>
>
>
> [1.] One line summary of the problem:
>
> make modules failed Segfault (program cpp0)
>
> [2.] Full description of the problem/report:
>
> gcc: Internal error: Segmentation fault (program cpp0)
> Please submit a full bug report.

That (above) is requesting a full bug report on gcc, not Linux kernel.

See URL below:

> See <URL:http://bugzilla.redhat.com/bugzilla/> for instructions.
> make[3]: *** [cycx_drv.o] Error 1
> make[3]: Leaving directory `/usr/src/linux-2.4.31/drivers/net/wan'
> make[2]: *** [_modsubdir_wan] Error 2
> make[2]: Leaving directory `/usr/src/linux-2.4.31/drivers/net'
> make[1]: *** [_modsubdir_net] Error 2
> make[1]: Leaving directory `/usr/src/linux-2.4.31/drivers'
> make: *** [_mod_drivers] Error 2
> [root@wulff linux-2.4.31]# In file included from
> /usr/src/linux-2.4.31/include/linux/vmalloc.h:5,
> from /usr/src/linux-2.4.31/include/asm/io.h:47,
> from cycx_drv.c:60:
> /usr/src/linux-2.4.31/include/linux/mm.h:155: parse error at end of input
> /usr/src/linux-2.4.31/include/linux/mm.h:155: warning: no semicolon at
> end of struct or union
>
>
> [3.] Keywords (i.e., modules, networking, kernel):
> Modules
>
> [4.] Kernel version (from /proc/version):
>
> [gvtlinux@wulff linux-2.4.31]$ cat /proc/version
> Linux version 2.4.20-28.7 (bhcompile@xxxxxxxxxxxxxxxxxxxxxx) (gcc
> version 2.96 20000731 (Red Hat Linux 7.3 2.96-126)) #1 Thu Dec 18
> 11:18:28 EST 2003
>
> [5.] Output of Oops.. message (if applicable) with symbolic information
> resolved (see Documentation/oops-tracing.txt)
>
> [6.] A small shell script or example program which triggers the
> problem (if possible)
> Presently running RedHat 7.3 with kernel-athlon-2.4.20-28.7 from rpm
>
> cd /usr/src/linux-2.4.31 downloaded today at 6:45 PM MST 8/4/05
> make mrproper
> cp /boot/config-2.4.20-28.7 /usr/src/linux-2.4.31/.config
> make oldconfig (Took all of the defaults no changes)
> make xconfig
> make dep
> make bzImage
> make modules
>
>
> [7.] Environment
> ASUS A7M-266, Athlon 1.4GHz, 512M, Nvidia Riva TNT/2, Link-Sys 10/100,
> D-Link 1000 Marvell, Promise tx/100 IDE controller. RedHat 7.3 with as
> updates as currently available from RedHat, Grrr!
>
> [7.1.] Software (add the output of the ver_linux script here)
>
> [gvtlinux@wulff linux-2.4.31]$ sh scripts/ver_linux
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux wulff 2.4.20-28.7 #1 Thu Dec 18 11:18:28 EST 2003 i686 unknown
>
> Gnu C 2.96
> Gnu make 3.79.1
> util-linux 2.11n
> mount 2.11n
> modutils 2.4.18
> e2fsprogs 1.27
> reiserfsprogs 3.x.0j
> quota-tools 3.06.
> PPP 2.4.1
> isdn4k-utils 3.1pre1
> Linux C Library 2.2.5
> Dynamic linker (ldd) 2.2.5
> Procps 2.0.7
> Net-tools 1.60
> Console-tools 0.3.3
> Sh-utils 2.0.11
> Modules Loaded sr_mod cmpci soundcore binfmt_misc autofs tulip
> ipchains ide-scsi scsi_mod ide-cd cdrom usb-uhci usbcore ext3 jbd
>
>
> [7.2.] Processor information (from /proc/cpuinfo):
>
> [gvtlinux@wulff linux-2.4.31]$ cat /proc/cpuinfo
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 6
> model : 4
> model name : AMD Athlon(tm) Processor
> stepping : 4
> cpu MHz : 1400.110
> cache size : 256 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
> pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
> bogomips : 2791.83
>
> [7.3.] Module information (from /proc/modules):
>
> [gvtlinux@wulff linux-2.4.31]$ cat /proc/modules
> sr_mod 16216 2 (autoclean)
> cmpci 32468 0 (autoclean)
> soundcore 6436 4 (autoclean) [cmpci]
> binfmt_misc 7204 1
> autofs 11780 0 (autoclean) (unused)
> tulip 42272 1
> ipchains 49484 10
> ide-scsi 10816 1
> scsi_mod 107212 2 [sr_mod ide-scsi]
> ide-cd 32064 0
> cdrom 31936 0 [sr_mod ide-cd]
> usb-uhci 24356 0 (unused)
> usbcore 73504 1 [usb-uhci]
> ext3 65280 2
> jbd 47468 2 [ext3]
>
> [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
>
> [gvtlinux@wulff linux-2.4.31]$ cat /proc/ioports
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0070-007f : rtc
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : ide1
> 01f0-01f7 : ide0
> 02f8-02ff : serial(auto)
> 0330-0331 : cmpci Midi
> 0376-0376 : ide1
> 0388-038b : cmpci FM
> 03c0-03df : vga+
> 03f6-03f6 : ide0
> 03f8-03ff : serial(auto)
> 0cf8-0cff : PCI conf1
> 8000-80ff : Linksys Network Everywhere Fast Ethernet 10/100 model NC100
> 8000-80ff : tulip
> 8400-84ff : PCI device 1186:4c00 (D-Link System Inc)
> 8800-880f : Promise Technology, Inc. 20268
> 8800-8807 : ide2
> 8808-880f : ide3
> 9000-9003 : Promise Technology, Inc. 20268
> 9400-9407 : Promise Technology, Inc. 20268
> 9800-9803 : Promise Technology, Inc. 20268
> a000-a007 : Promise Technology, Inc. 20268
> a400-a4ff : C-Media Electronics Inc CM8738
> a400-a4ff : cmpci
> d000-d01f : VIA Technologies, Inc. USB (#2)
> d000-d01f : usb-uhci
> d400-d41f : VIA Technologies, Inc. USB
> d400-d41f : usb-uhci
> d800-d80f : VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
> d800-d807 : ide0
> d808-d80f : ide1
> e000-e003 : Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] System Controller
> e300-e37f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
> e800-e80f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
>
>
> [gvtlinux@wulff linux-2.4.31]$ cat /proc/ioports
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0070-007f : rtc
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : ide1
> 01f0-01f7 : ide0
> 02f8-02ff : serial(auto)
> 0330-0331 : cmpci Midi
> 0376-0376 : ide1
> 0388-038b : cmpci FM
> 03c0-03df : vga+
> 03f6-03f6 : ide0
> 03f8-03ff : serial(auto)
> 0cf8-0cff : PCI conf1
> 8000-80ff : Linksys Network Everywhere Fast Ethernet 10/100 model NC100
> 8000-80ff : tulip
> 8400-84ff : PCI device 1186:4c00 (D-Link System Inc)
> 8800-880f : Promise Technology, Inc. 20268
> 8800-8807 : ide2
> 8808-880f : ide3
> 9000-9003 : Promise Technology, Inc. 20268
> 9400-9407 : Promise Technology, Inc. 20268
> 9800-9803 : Promise Technology, Inc. 20268
> a000-a007 : Promise Technology, Inc. 20268
> a400-a4ff : C-Media Electronics Inc CM8738
> a400-a4ff : cmpci
> d000-d01f : VIA Technologies, Inc. USB (#2)
> d000-d01f : usb-uhci
> d400-d41f : VIA Technologies, Inc. USB
> d400-d41f : usb-uhci
> d800-d80f : VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
> d800-d807 : ide0
> d808-d80f : ide1
> e000-e003 : Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] System Controller
> e300-e37f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
> e800-e80f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
> [gvtlinux@wulff linux-2.4.31]$ cat /proc/iomem
> 00000000-0009fbff : System RAM
> 0009fc00-0009ffff : reserved
> 000a0000-000bffff : Video RAM area
> 000c0000-000c7fff : Video ROM
> 000f0000-000fffff : System ROM
> 00100000-1ffebfff : System RAM
> 00100000-0022250a : Kernel code
> 0022250b-0031845f : Kernel data
> 1ffec000-1ffeefff : ACPI Tables
> 1ffef000-1fffefff : reserved
> 1ffff000-1fffffff : ACPI Non-volatile Storage
> f0800000-f08003ff : Linksys Network Everywhere Fast Ethernet 10/100
> model NC100
> f0800000-f08003ff : tulip
> f1000000-f1003fff : PCI device 1186:4c00 (D-Link System Inc)
> f1800000-f1803fff : Promise Technology, Inc. 20268
> f2000000-f3dfffff : PCI Bus #01
> f2000000-f2ffffff : nVidia Corporation RIVA TNT2 Model 64
> f3f00000-f77fffff : PCI Bus #01
> f4000000-f5ffffff : nVidia Corporation RIVA TNT2 Model 64
> f7800000-f7800fff : Advanced Micro Devices [AMD] AMD-760 [IGD4-1P]
> System Controller
> f8000000-fbffffff : Advanced Micro Devices [AMD] AMD-760 [IGD4-1P]
> System Controller
> ffff0000-ffffffff : reserved
>
>
> [7.5.] PCI information ('lspci -vvv' as root)
>
> [root@wulff linux-2.4.31]# /sbin/lspci -vvv
> 00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P]
> System Controller (rev 13)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 32
> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
> Region 1: Memory at f7800000 (32-bit, prefetchable) [size=4K]
> Region 2: I/O ports at e000 [disabled] [size=4]
> Capabilities: [a0] AGP version 2.0
> Status: RQ=15 SBA+ 64bit- FW+ Rate=x1,x2
> Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
>
> 00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] AGP
> Bridge (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 0000e000-0000dfff
> Memory behind bridge: f2000000-f3dfffff
> Prefetchable memory behind bridge: f3f00000-f77fffff
> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
>
> 00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
> (rev 40)
> Subsystem: Asustek Computer, Inc.: Unknown device 8040
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping+ SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:04.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master
> IDE (rev 06) (prog-if 8a [Master SecP PriP])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32
> Region 4: I/O ports at d800 [size=16]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:04.2 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00
> [UHCI])
> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32, cache line size 08
> Interrupt: pin D routed to IRQ 9
> Region 4: I/O ports at d400 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:04.3 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00
> [UHCI])
> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32, cache line size 08
> Interrupt: pin D routed to IRQ 9
> Region 4: I/O ports at d000 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:04.4 Non-VGA unclassified device: VIA Technologies, Inc. VT82C686
> [Apollo Super ACPI] (rev 40)
> Subsystem: Asustek Computer, Inc.: Unknown device 8040
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin ? routed to IRQ 9
> Capabilities: [68] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
> Subsystem: Asustek Computer, Inc. CMI8738 6ch-MX
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping+ SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (500ns min, 6000ns max)
> Interrupt: pin A routed to IRQ 10
> Region 0: I/O ports at a400 [size=256]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:0a.0 Unknown mass storage controller: Promise Technology, Inc. 20268
> (rev 02) (prog-if 85)
> Subsystem: Promise Technology, Inc. Ultra100TX2
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (1000ns min, 4500ns max), cache line size 08
> Interrupt: pin A routed to IRQ 5
> Region 0: I/O ports at a000 [size=8]
> Region 1: I/O ports at 9800 [size=4]
> Region 2: I/O ports at 9400 [size=8]
> Region 3: I/O ports at 9000 [size=4]
> Region 4: I/O ports at 8800 [size=16]
> Region 5: Memory at f1800000 (32-bit, non-prefetchable) [size=16K]
> Expansion ROM at <unassigned> [disabled] [size=16K]
> Capabilities: [60] Power Management version 1
> Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:0b.0 Ethernet controller: D-Link System Inc: Unknown device 4c00 (rev 11)
> Subsystem: D-Link System Inc: Unknown device 4c00
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (5750ns min, 7750ns max), cache line size 08
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at f1000000 (32-bit, non-prefetchable) [size=16K]
> Region 1: I/O ports at 8400 [size=256]
> Expansion ROM at <unassigned> [disabled] [size=128K]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=7 DScale=1 PME-
> Capabilities: [50] Vital Product Data
>
> 00:0d.0 Ethernet controller: Linksys Network Everywhere Fast Ethernet
> 10/100 model NC100 (rev 11)
> Subsystem: Linksys: Unknown device 0574
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (63750ns min, 63750ns max), cache line size 08
> Interrupt: pin A routed to IRQ 9
> Region 0: I/O ports at 8000 [size=256]
> Region 1: Memory at f0800000 (32-bit, non-prefetchable) [size=1K]
> Expansion ROM at <unassigned> [disabled] [size=128K]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 01:05.0 VGA compatible controller: nVidia Corporation RIVA TNT2 Model 64
> (rev 15) (prog-if 00 [VGA])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (1250ns min, 250ns max)
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at f2000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at f4000000 (32-bit, prefetchable) [size=32M]
> Expansion ROM at f3ff0000 [disabled] [size=64K]
> Capabilities: [60] Power Management version 1
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [44] AGP version 2.0
> Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2
> Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
>
>
> [7.6.] SCSI information (from /proc/scsi/scsi)
>
> [gvtlinux@wulff linux-2.4.31]$ cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: Memorex Model: 52MAXX 2452AJ Rev: 6WS2
> Type: CD-ROM ANSI SCSI revision: 02
>
> [7.7.] Other information that might be relevant to the problem
> (please look in /proc and include all information that you
> think to be relevant):
>
> kernel configuration file supplied upon request to gvtlinux@xxxxxxxxxxxx
>
> [X.] Other notes, patches, fixes, workarounds:
>
>
> I expect you to tell me to upgrade everything. Thanks for taking this
> bug report.
>
> Thanks
>
> George Van Tuyl
> gvtlinux@xxxxxxxxxxxx
> -

---
~Randy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Dan Kegel: "re: make modules Segfault"
Previous message: Con Kolivas: "[PATCH] Timer Top tweaks"
In reply to: George Van Tuyl: "make modules Segfault"
Next in thread: Adrian Bunk: "Re: make modules Segfault"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]