Re: 2 errors in 2.6.12

From: Michal Semler
Date: Sun Jul 31 2005 - 06:54:04 EST


I tested both - problem with SB Live! is fixed, but tuning problem in PV951
still exist :(

This is what I gets into dmesg:

Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNKH] -> GSI 9 (level, low) ->
bttv0: Bt878 (rev 17) at 0000:01:0b.0, irq: 9, latency: 32, mmio: 0xb69fe000
bttv0: using: ProVideo PV951 [card=42,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: using tuner=1
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tvaudio: found pic16c54 (PV951) @ 0x96
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner: Unknown parameter `type'
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [LNKB] -> GSI 10 (level, low) ->
IRQ 10


Dne pá 29. července 2005 6:48 jste napsal(a):
> Michal Semler <cijoml@xxxxxxxx> wrote:
> > Hi,
> >
> > I compiled 2.6.12 and my PV951 TV card doesn't work (tvtime says no
> > signal) and my SBLive! plays only on 2 repros Front left and right.
> >
> > When I booted back to 2.6.11, everything worked like a charm
> Are these fixed in 2.6.13-rc4?
> If not, please cc linux-kernel when replying, thanks.

S pozdravem

Michal Semler
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at
Please read the FAQ at