[PATCH][1/3] ppc32: add 440ep support

From: Matt Porter
Date: Wed Jul 27 2005 - 12:40:53 EST



Add PPC440EP core support. PPC440EP is a PPC440-based SoC with
a classic PPC FPU and another set of peripherals.

Signed-off-by: Wade Farnsworth <wfarnsworth@xxxxxxxxxx>
Signed-off-by: Matt Porter <mporter@xxxxxxxxxxxxxxxxxxx>

diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile
--- a/arch/ppc/boot/simple/Makefile
+++ b/arch/ppc/boot/simple/Makefile
@@ -61,6 +61,12 @@ zimageinitrd-$(CONFIG_IBM_OPENBIOS) := z
end-$(CONFIG_EMBEDDEDBOOT) := embedded
misc-$(CONFIG_EMBEDDEDBOOT) := misc-embedded.o

+ zimage-$(CONFIG_BAMBOO) := zImage-TREE
+zimageinitrd-$(CONFIG_BAMBOO) := zImage.initrd-TREE
+ end-$(CONFIG_BAMBOO) := bamboo
+ entrypoint-$(CONFIG_BAMBOO) := 0x01000000
+ extra.o-$(CONFIG_BAMBOO) := pibs.o
+
zimage-$(CONFIG_EBONY) := zImage-TREE
zimageinitrd-$(CONFIG_EBONY) := zImage.initrd-TREE
end-$(CONFIG_EBONY) := ebony
diff --git a/arch/ppc/boot/simple/pibs.c b/arch/ppc/boot/simple/pibs.c
--- a/arch/ppc/boot/simple/pibs.c
+++ b/arch/ppc/boot/simple/pibs.c
@@ -91,9 +91,11 @@ load_kernel(unsigned long load_addr, int

mac64 = simple_strtoull((char *)PIBS_MAC_BASE, 0, 16);
memcpy(hold_residual->bi_enetaddr, (char *)&mac64+2, 6);
-#ifdef CONFIG_440GX
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP)
mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET), 0, 16);
memcpy(hold_residual->bi_enet1addr, (char *)&mac64+2, 6);
+#endif
+#ifdef CONFIG_440GX
mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*2), 0, 16);
memcpy(hold_residual->bi_enet2addr, (char *)&mac64+2, 6);
mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*3), 0, 16);
diff --git a/arch/ppc/kernel/cputable.c b/arch/ppc/kernel/cputable.c
--- a/arch/ppc/kernel/cputable.c
+++ b/arch/ppc/kernel/cputable.c
@@ -852,6 +852,26 @@ struct cpu_spec cpu_specs[] = {

#endif /* CONFIG_40x */
#ifdef CONFIG_44x
+ {
+ .pvr_mask = 0xf0000fff,
+ .pvr_value = 0x40000850,
+ .cpu_name = "440EP Rev. A",
+ .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
+ CPU_FTR_USE_TB,
+ .cpu_user_features = COMMON_PPC, /* 440EP has an FPU */
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ },
+ {
+ .pvr_mask = 0xf0000fff,
+ .pvr_value = 0x400008d3,
+ .cpu_name = "440EP Rev. B",
+ .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
+ CPU_FTR_USE_TB,
+ .cpu_user_features = COMMON_PPC, /* 440EP has an FPU */
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ },
{ /* 440GP Rev. B */
.pvr_mask = 0xf0000fff,
.pvr_value = 0x40000440,
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
--- a/arch/ppc/kernel/entry.S
+++ b/arch/ppc/kernel/entry.S
@@ -215,6 +215,7 @@ syscall_dotrace_cont:
lwzx r10,r10,r0 /* Fetch system call handler [ptr] */
mtlr r10
addi r9,r1,STACK_FRAME_OVERHEAD
+ PPC440EP_ERR42
blrl /* Call handler */
.globl ret_from_syscall
ret_from_syscall:
diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S
--- a/arch/ppc/kernel/head_44x.S
+++ b/arch/ppc/kernel/head_44x.S
@@ -190,7 +190,9 @@ skpinv: addi r4,r4,1 /* Increment */

/* xlat fields */
lis r4,UART0_PHYS_IO_BASE@h /* RPN depends on SoC */
+#ifndef CONFIG_440EP
ori r4,r4,0x0001 /* ERPN is 1 for second 4GB page */
+#endif

/* attrib fields */
li r5,0
@@ -228,6 +230,16 @@ skpinv: addi r4,r4,1 /* Increment */
lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
mtspr SPRN_IVPR,r4

+#ifdef CONFIG_440EP
+ /* Clear DAPUIB flag in CCR0 (enable APU between CPU and FPU) */
+ mfspr r2,SPRN_CCR0
+ lis r3,0xffef
+ ori r3,r3,0xffff
+ and r2,r2,r3
+ mtspr SPRN_CCR0,r2
+ isync
+#endif
+
/*
* This is where the main kernel code starts.
*/
diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S
--- a/arch/ppc/kernel/misc.S
+++ b/arch/ppc/kernel/misc.S
@@ -1145,6 +1145,7 @@ _GLOBAL(kernel_thread)
stwu r0,-16(r1)
mtlr r30 /* fn addr in lr */
mr r3,r31 /* load arg and call fn */
+ PPC440EP_ERR42
blrl
li r0,__NR_exit /* exit if function returns */
li r3,0
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -68,6 +68,11 @@ choice
depends on 44x
default EBONY

+config BAMBOO
+ bool "Bamboo"
+ help
+ This option enables support for the IBM PPC440EP evaluation board.
+
config EBONY
bool "Ebony"
help
@@ -98,6 +103,12 @@ config NP405H
depends on ASH
default y

+config 440EP
+ bool
+ depends on BAMBOO
+ select PPC_FPU
+ default y
+
config 440GP
bool
depends on EBONY
@@ -115,7 +126,7 @@ config 440SP

config 440
bool
- depends on 440GP || 440SP
+ depends on 440GP || 440SP || 440EP
default y

config 440A
@@ -123,6 +134,11 @@ config 440A
depends on 440GX
default y

+config IBM440EP_ERR42
+ bool
+ depends on 440EP
+ default y
+
# All 405-based cores up until the 405GPR and 405EP have this errata.
config IBM405_ERR77
bool
@@ -142,7 +158,7 @@ config BOOKE

config IBM_OCP
bool
- depends on ASH || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+ depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
default y

config XILINX_OCP
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
--- a/arch/ppc/platforms/4xx/Makefile
+++ b/arch/ppc/platforms/4xx/Makefile
@@ -2,6 +2,7 @@
# Makefile for the PowerPC 4xx linux kernel.

obj-$(CONFIG_ASH) += ash.o
+obj-$(CONFIG_BAMBOO) += bamboo.o
obj-$(CONFIG_CPCI405) += cpci405.o
obj-$(CONFIG_EBONY) += ebony.o
obj-$(CONFIG_EP405) += ep405.o
@@ -19,6 +20,7 @@ obj-$(CONFIG_405GP) += ibm405gp.o
obj-$(CONFIG_REDWOOD_5) += ibmstb4.o
obj-$(CONFIG_NP405H) += ibmnp405h.o
obj-$(CONFIG_REDWOOD_6) += ibmstbx25.o
+obj-$(CONFIG_440EP) += ibm440ep.o
obj-$(CONFIG_440GP) += ibm440gp.o
obj-$(CONFIG_440GX) += ibm440gx.o
obj-$(CONFIG_440SP) += ibm440sp.o
diff --git a/arch/ppc/platforms/4xx/ibm440ep.c b/arch/ppc/platforms/4xx/ibm440ep.c
new file mode 100644
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibm440ep.c
@@ -0,0 +1,220 @@
+/*
+ * arch/ppc/platforms/4xx/ibm440ep.c
+ *
+ * PPC440EP I/O descriptions
+ *
+ * Wade Farnsworth <wfarnsworth@xxxxxxxxxx>
+ * Copyright 2004 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <platforms/4xx/ibm440ep.h>
+#include <asm/ocp.h>
+#include <asm/ppc4xx_pic.h>
+
+static struct ocp_func_emac_data ibm440ep_emac0_def = {
+ .rgmii_idx = -1, /* No RGMII */
+ .rgmii_mux = -1, /* No RGMII */
+ .zmii_idx = 0, /* ZMII device index */
+ .zmii_mux = 0, /* ZMII input of this EMAC */
+ .mal_idx = 0, /* MAL device index */
+ .mal_rx_chan = 0, /* MAL rx channel number */
+ .mal_tx_chan = 0, /* MAL tx channel number */
+ .wol_irq = 61, /* WOL interrupt number */
+ .mdio_idx = -1, /* No shared MDIO */
+ .tah_idx = -1, /* No TAH */
+};
+
+static struct ocp_func_emac_data ibm440ep_emac1_def = {
+ .rgmii_idx = -1, /* No RGMII */
+ .rgmii_mux = -1, /* No RGMII */
+ .zmii_idx = 0, /* ZMII device index */
+ .zmii_mux = 1, /* ZMII input of this EMAC */
+ .mal_idx = 0, /* MAL device index */
+ .mal_rx_chan = 1, /* MAL rx channel number */
+ .mal_tx_chan = 2, /* MAL tx channel number */
+ .wol_irq = 63, /* WOL interrupt number */
+ .mdio_idx = -1, /* No shared MDIO */
+ .tah_idx = -1, /* No TAH */
+};
+OCP_SYSFS_EMAC_DATA()
+
+static struct ocp_func_mal_data ibm440ep_mal0_def = {
+ .num_tx_chans = 4, /* Number of TX channels */
+ .num_rx_chans = 2, /* Number of RX channels */
+ .txeob_irq = 10, /* TX End Of Buffer IRQ */
+ .rxeob_irq = 11, /* RX End Of Buffer IRQ */
+ .txde_irq = 33, /* TX Descriptor Error IRQ */
+ .rxde_irq = 34, /* RX Descriptor Error IRQ */
+ .serr_irq = 32, /* MAL System Error IRQ */
+};
+OCP_SYSFS_MAL_DATA()
+
+static struct ocp_func_iic_data ibm440ep_iic0_def = {
+ .fast_mode = 0, /* Use standad mode (100Khz) */
+};
+
+static struct ocp_func_iic_data ibm440ep_iic1_def = {
+ .fast_mode = 0, /* Use standad mode (100Khz) */
+};
+OCP_SYSFS_IIC_DATA()
+
+struct ocp_def core_ocp[] = {
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_OPB,
+ .index = 0,
+ .paddr = 0x0EF600000ULL,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 0,
+ .paddr = PPC440EP_UART0_ADDR,
+ .irq = UART0_INT,
+ .pm = IBM_CPM_UART0,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 1,
+ .paddr = PPC440EP_UART1_ADDR,
+ .irq = UART1_INT,
+ .pm = IBM_CPM_UART1,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 2,
+ .paddr = PPC440EP_UART2_ADDR,
+ .irq = UART2_INT,
+ .pm = IBM_CPM_UART2,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_16550,
+ .index = 3,
+ .paddr = PPC440EP_UART3_ADDR,
+ .irq = UART3_INT,
+ .pm = IBM_CPM_UART3,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_IIC,
+ .index = 0,
+ .paddr = 0x0EF600700ULL,
+ .irq = 2,
+ .pm = IBM_CPM_IIC0,
+ .additions = &ibm440ep_iic0_def,
+ .show = &ocp_show_iic_data
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_IIC,
+ .index = 1,
+ .paddr = 0x0EF600800ULL,
+ .irq = 7,
+ .pm = IBM_CPM_IIC1,
+ .additions = &ibm440ep_iic1_def,
+ .show = &ocp_show_iic_data
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_GPIO,
+ .index = 0,
+ .paddr = 0x0EF600B00ULL,
+ .irq = OCP_IRQ_NA,
+ .pm = IBM_CPM_GPIO0,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_GPIO,
+ .index = 1,
+ .paddr = 0x0EF600C00ULL,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_MAL,
+ .paddr = OCP_PADDR_NA,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ .additions = &ibm440ep_mal0_def,
+ .show = &ocp_show_mal_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_EMAC,
+ .index = 0,
+ .paddr = 0x0EF600E00ULL,
+ .irq = 60,
+ .pm = OCP_CPM_NA,
+ .additions = &ibm440ep_emac0_def,
+ .show = &ocp_show_emac_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_EMAC,
+ .index = 1,
+ .paddr = 0x0EF600F00ULL,
+ .irq = 62,
+ .pm = OCP_CPM_NA,
+ .additions = &ibm440ep_emac1_def,
+ .show = &ocp_show_emac_data,
+ },
+ { .vendor = OCP_VENDOR_IBM,
+ .function = OCP_FUNC_ZMII,
+ .paddr = 0x0EF600D00ULL,
+ .irq = OCP_IRQ_NA,
+ .pm = OCP_CPM_NA,
+ },
+ { .vendor = OCP_VENDOR_INVALID
+ }
+};
+
+/* Polarity and triggering settings for internal interrupt sources */
+struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
+ { .polarity = 0xffbffe03,
+ .triggering = 0xfffffe00,
+ .ext_irq_mask = 0x000001fc, /* IRQ0 - IRQ6 */
+ },
+ { .polarity = 0xffffc6ef,
+ .triggering = 0xffffc7ff,
+ .ext_irq_mask = 0x00003800, /* IRQ7 - IRQ9 */
+ },
+};
+
+static struct resource usb_gadget_resources[] = {
+ [0] = {
+ .start = 0x050000100ULL,
+ .end = 0x05000017FULL,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 55,
+ .end = 55,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 dma_mask = 0xffffffffULL;
+
+static struct platform_device usb_gadget_device = {
+ .name = "musbhsfc",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(usb_gadget_resources),
+ .resource = usb_gadget_resources,
+ .dev = {
+ .dma_mask = &dma_mask,
+ .coherent_dma_mask = 0xffffffffULL,
+ }
+};
+
+static struct platform_device *ibm440ep_devs[] __initdata = {
+ &usb_gadget_device,
+};
+
+static int __init
+ibm440ep_platform_add_devices(void)
+{
+ return platform_add_devices(ibm440ep_devs, ARRAY_SIZE(ibm440ep_devs));
+}
+arch_initcall(ibm440ep_platform_add_devices);
+
diff --git a/arch/ppc/platforms/4xx/ibm440ep.h b/arch/ppc/platforms/4xx/ibm440ep.h
new file mode 100644
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ibm440ep.h
@@ -0,0 +1,76 @@
+/*
+ * arch/ppc/platforms/4xx/ibm440ep.h
+ *
+ * PPC440EP definitions
+ *
+ * Wade Farnsworth <wfarnsworth@xxxxxxxxxx>
+ *
+ * Copyright 2002 Roland Dreier
+ * Copyright 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __PPC_PLATFORMS_IBM440EP_H
+#define __PPC_PLATFORMS_IBM440EP_H
+
+#include <linux/config.h>
+#include <asm/ibm44x.h>
+
+/* UART */
+#define PPC440EP_UART0_ADDR 0x0EF600300
+#define PPC440EP_UART1_ADDR 0x0EF600400
+#define PPC440EP_UART2_ADDR 0x0EF600500
+#define PPC440EP_UART3_ADDR 0x0EF600600
+#define UART0_INT 0
+#define UART1_INT 1
+#define UART2_INT 3
+#define UART3_INT 4
+
+/* Clock and Power Management */
+#define IBM_CPM_IIC0 0x80000000 /* IIC interface */
+#define IBM_CPM_IIC1 0x40000000 /* IIC interface */
+#define IBM_CPM_PCI 0x20000000 /* PCI bridge */
+#define IBM_CPM_USB1H 0x08000000 /* USB 1.1 Host */
+#define IBM_CPM_FPU 0x04000000 /* floating point unit */
+#define IBM_CPM_CPU 0x02000000 /* processor core */
+#define IBM_CPM_DMA 0x01000000 /* DMA controller */
+#define IBM_CPM_BGO 0x00800000 /* PLB to OPB bus arbiter */
+#define IBM_CPM_BGI 0x00400000 /* OPB to PLB bridge */
+#define IBM_CPM_EBC 0x00200000 /* External Bus Controller */
+#define IBM_CPM_EBM 0x00100000 /* Ext Bus Master Interface */
+#define IBM_CPM_DMC 0x00080000 /* SDRAM peripheral controller */
+#define IBM_CPM_PLB4 0x00040000 /* PLB4 bus arbiter */
+#define IBM_CPM_PLB4x3 0x00020000 /* PLB4 to PLB3 bridge controller */
+#define IBM_CPM_PLB3x4 0x00010000 /* PLB3 to PLB4 bridge controller */
+#define IBM_CPM_PLB3 0x00008000 /* PLB3 bus arbiter */
+#define IBM_CPM_PPM 0x00002000 /* PLB Performance Monitor */
+#define IBM_CPM_UIC1 0x00001000 /* Universal Interrupt Controller */
+#define IBM_CPM_GPIO0 0x00000800 /* General Purpose IO (??) */
+#define IBM_CPM_GPT 0x00000400 /* General Purpose Timers */
+#define IBM_CPM_UART0 0x00000200 /* serial port 0 */
+#define IBM_CPM_UART1 0x00000100 /* serial port 1 */
+#define IBM_CPM_UIC0 0x00000080 /* Universal Interrupt Controller */
+#define IBM_CPM_TMRCLK 0x00000040 /* CPU timers */
+#define IBM_CPM_EMAC0 0x00000020 /* ethernet port 0 */
+#define IBM_CPM_EMAC1 0x00000010 /* ethernet port 1 */
+#define IBM_CPM_UART2 0x00000008 /* serial port 2 */
+#define IBM_CPM_UART3 0x00000004 /* serial port 3 */
+#define IBM_CPM_USB2D 0x00000002 /* USB 2.0 Device */
+#define IBM_CPM_USB2H 0x00000001 /* USB 2.0 Host */
+
+#define DFLT_IBM4xx_PM ~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU \
+ | IBM_CPM_EBC | IBM_CPM_BGO | IBM_CPM_FPU \
+ | IBM_CPM_EBM | IBM_CPM_PLB4 | IBM_CPM_3x4 \
+ | IBM_CPM_PLB3 | IBM_CPM_PLB4x3 \
+ | IBM_CPM_EMAC0 | IBM_CPM_TMRCLK \
+ | IBM_CPM_DMA | IBM_CPM_PCI | IBM_CPM_EMAC1)
+
+
+#endif /* __PPC_PLATFORMS_IBM440EP_H */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_PPCBUG_NVRAM) += prep_nvram
obj-$(CONFIG_PPC_OCP) += ocp.o
obj-$(CONFIG_IBM_OCP) += ibm_ocp.o
obj-$(CONFIG_44x) += ibm44x_common.o
+obj-$(CONFIG_440EP) += ibm440gx_common.o
obj-$(CONFIG_440GP) += ibm440gp_common.o
obj-$(CONFIG_440GX) += ibm440gx_common.o
obj-$(CONFIG_440SP) += ibm440gx_common.o ibm440sp_common.o
@@ -44,6 +45,7 @@ obj-$(CONFIG_PPC_CHRP) += open_pic.o in
obj-$(CONFIG_PPC_PREP) += open_pic.o indirect_pci.o i8259.o todc_time.o
obj-$(CONFIG_ADIR) += i8259.o indirect_pci.o pci_auto.o \
todc_time.o
+obj-$(CONFIG_BAMBOO) += indirect_pci.o pci_auto.o todc_time.o
obj-$(CONFIG_CPCI690) += todc_time.o pci_auto.o
obj-$(CONFIG_EBONY) += indirect_pci.o pci_auto.o todc_time.o
obj-$(CONFIG_EV64260) += todc_time.o pci_auto.o
diff --git a/arch/ppc/syslib/ibm440gx_common.c b/arch/ppc/syslib/ibm440gx_common.c
--- a/arch/ppc/syslib/ibm440gx_common.c
+++ b/arch/ppc/syslib/ibm440gx_common.c
@@ -34,6 +34,10 @@ void __init ibm440gx_get_clocks(struct i
u32 plld = CPR_READ(DCRN_CPR_PLLD);
u32 uart0 = SDR_READ(DCRN_SDR_UART0);
u32 uart1 = SDR_READ(DCRN_SDR_UART1);
+#ifdef CONFIG_440EP
+ u32 uart2 = SDR_READ(DCRN_SDR_UART2);
+ u32 uart3 = SDR_READ(DCRN_SDR_UART3);
+#endif

/* Dividers */
u32 fbdv = __fix_zero((plld >> 24) & 0x1f, 32);
@@ -96,6 +100,17 @@ bypass:
p->uart1 = ser_clk;
else
p->uart1 = p->plb / __fix_zero(uart1 & 0xff, 256);
+#ifdef CONFIG_440EP
+ if (uart2 & 0x00800000)
+ p->uart2 = ser_clk;
+ else
+ p->uart2 = p->plb / __fix_zero(uart2 & 0xff, 256);
+
+ if (uart3 & 0x00800000)
+ p->uart3 = ser_clk;
+ else
+ p->uart3 = p->plb / __fix_zero(uart3 & 0xff, 256);
+#endif
}

/* Issue L2C diagnostic command */
diff --git a/arch/ppc/syslib/ibm44x_common.h b/arch/ppc/syslib/ibm44x_common.h
--- a/arch/ppc/syslib/ibm44x_common.h
+++ b/arch/ppc/syslib/ibm44x_common.h
@@ -29,6 +29,10 @@ struct ibm44x_clocks {
unsigned int ebc; /* PerClk */
unsigned int uart0;
unsigned int uart1;
+#ifdef CONFIG_440EP
+ unsigned int uart2;
+ unsigned int uart3;
+#endif
};

/* common 44x platform init */
diff --git a/include/asm-ppc/ibm44x.h b/include/asm-ppc/ibm44x.h
--- a/include/asm-ppc/ibm44x.h
+++ b/include/asm-ppc/ibm44x.h
@@ -35,8 +35,10 @@
#define PPC44x_LOW_SLOT 63

/* LS 32-bits of UART0 physical address location for early serial text debug */
-#ifdef CONFIG_440SP
+#if defined(CONFIG_440SP)
#define UART0_PHYS_IO_BASE 0xf0000200
+#elif defined(CONFIG_440EP)
+#define UART0_PHYS_IO_BASE 0xe0000000
#else
#define UART0_PHYS_IO_BASE 0x40000200
#endif
@@ -49,11 +51,16 @@
/*
* Standard 4GB "page" definitions
*/
-#ifdef CONFIG_440SP
+#if defined(CONFIG_440SP)
#define PPC44x_IO_PAGE 0x0000000100000000ULL
#define PPC44x_PCICFG_PAGE 0x0000000900000000ULL
#define PPC44x_PCIIO_PAGE PPC44x_PCICFG_PAGE
#define PPC44x_PCIMEM_PAGE 0x0000000a00000000ULL
+#elif defined(CONFIG_440EP)
+#define PPC44x_IO_PAGE 0x0000000000000000ULL
+#define PPC44x_PCICFG_PAGE 0x0000000000000000ULL
+#define PPC44x_PCIIO_PAGE PPC44x_PCICFG_PAGE
+#define PPC44x_PCIMEM_PAGE 0x0000000000000000ULL
#else
#define PPC44x_IO_PAGE 0x0000000100000000ULL
#define PPC44x_PCICFG_PAGE 0x0000000200000000ULL
@@ -64,7 +71,7 @@
/*
* 36-bit trap ranges
*/
-#ifdef CONFIG_440SP
+#if defined(CONFIG_440SP)
#define PPC44x_IO_LO 0xf0000000UL
#define PPC44x_IO_HI 0xf0000fffUL
#define PPC44x_PCI0CFG_LO 0x0ec00000UL
@@ -75,6 +82,13 @@
#define PPC44x_PCI2CFG_HI 0x2ec00007UL
#define PPC44x_PCIMEM_LO 0x80000000UL
#define PPC44x_PCIMEM_HI 0xdfffffffUL
+#elif defined(CONFIG_440EP)
+#define PPC44x_IO_LO 0xef500000UL
+#define PPC44x_IO_HI 0xefffffffUL
+#define PPC44x_PCI0CFG_LO 0xeec00000UL
+#define PPC44x_PCI0CFG_HI 0xeecfffffUL
+#define PPC44x_PCIMEM_LO 0xa0000000UL
+#define PPC44x_PCIMEM_HI 0xdfffffffUL
#else
#define PPC44x_IO_LO 0x40000000UL
#define PPC44x_IO_HI 0x40000fffUL
@@ -152,6 +166,12 @@
#define DCRN_SDR_UART0 0x0120
#define DCRN_SDR_UART1 0x0121

+#ifdef CONFIG_440EP
+#define DCRN_SDR_UART2 0x0122
+#define DCRN_SDR_UART3 0x0123
+#define DCRN_SDR_CUST0 0x4000
+#endif
+
/* SDR read/write helper macros */
#define SDR_READ(offset) ({\
mtdcr(DCRN_SDR_CONFIG_ADDR, offset); \
@@ -169,6 +189,14 @@
#define DCRNCAP_DMA_SG 1 /* have DMA scatter/gather capability */
#define DCRN_MAL_BASE 0x180

+#ifdef CONFIG_440EP
+#define DCRN_DMA2P40_BASE 0x300
+#define DCRN_DMA2P41_BASE 0x308
+#define DCRN_DMA2P42_BASE 0x310
+#define DCRN_DMA2P43_BASE 0x318
+#define DCRN_DMA2P4SR_BASE 0x320
+#endif
+
/* UIC */
#define DCRN_UIC0_BASE 0xc0
#define DCRN_UIC1_BASE 0xd0
diff --git a/include/asm-ppc/ibm4xx.h b/include/asm-ppc/ibm4xx.h
--- a/include/asm-ppc/ibm4xx.h
+++ b/include/asm-ppc/ibm4xx.h
@@ -97,6 +97,10 @@ void ppc4xx_init(unsigned long r3, unsig

#elif CONFIG_44x

+#if defined(CONFIG_BAMBOO)
+#include <platforms/4xx/bamboo.h>
+#endif
+
#if defined(CONFIG_EBONY)
#include <platforms/4xx/ebony.h>
#endif
diff --git a/include/asm-ppc/ppc_asm.h b/include/asm-ppc/ppc_asm.h
--- a/include/asm-ppc/ppc_asm.h
+++ b/include/asm-ppc/ppc_asm.h
@@ -186,6 +186,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
#define PPC405_ERR77_SYNC
#endif

+#ifdef CONFIG_IBM440EP_ERR42
+#define PPC440EP_ERR42 isync
+#else
+#define PPC440EP_ERR42
+#endif
+
/* The boring bits... */

/* Condition Register Bit Fields */

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/