Re: [BUG] Tulip for ULi M5263: No packets transmitted

From: Ricardo Bugalho
Date: Mon Jul 25 2005 - 13:48:14 EST


Hello,
yes it does help. Thanks.
Still not perfect though, it gives a warning, reports to be working on
half-duplex and I can't use mii-tool with it.

Here's the dmesg output (2.6.12.3 + patch):
Linux Tulip driver version 1.1.13 (May 11, 2002)
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 17
tulip0: EEPROM default media type Autosense.
tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1)
block.
tulip0: Index #1 - Media 10baseT (#0) described by a <unknown> (128)
block.
tulip0: Index #2 - Media 10baseT (#0) described by a 21140 non-MII (0)
block.
tulip0: Index #3 - Media 10base2 (#1) described by a 21140 non-MII (0)
block.
tulip0: Index #4 - Media 10baseT-FDX (#4) described by a 21140 non-MII
(0) block.
tulip0: Index #5 - Media 100baseTx-FDX (#5) described by a 21140
non-MII (0) block.
tulip0: ***WARNING***: No MII transceiver found!
eth0: ULi M5261/M5263 rev 64 at f884cc00, 00:0B:6A:D1:FC:B9, IRQ 17.
...
eth0: Setting half-duplex based on MII#1 link partner capability of
ffff.
...

When I try to run mii-tool, it yields:
# mii-tool eth0
SIOCGMIIPHY on 'eth0' failed: No such device


On Mon, 2005-07-25 at 14:16 +0200, Jiri Benc wrote:

> Does tulip-fixes-for-uli5261.patch from -mm tree help?
>

--
Ricardo

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/