Re: [PATCH] Dynamic tick for x86 version 050610-1

[Benjamin Herrenschmidt]

On Tue, 2005-07-19 at 14:51 +0800, hugang@xxxxxxxxxxxx wrote:
> On Sat, Jun 18, 2005 at 04:30:32PM +1000, Benjamin Herrenschmidt wrote:
> > 
> > > I'm try to port it powerpc, Here is a patch.
> > > 
> > >  Port Dynamic Tick Timer to new platform is easy. :)
> > >   1) Find the reprogram timer interface.
> > >   2) do a hook in the idle function.
> > > 
> > > That worked on my PowerBookG4 12'.
> > 
> > Did you get a measurable gain on power consumption ?
> > 
> > Last time I toyed with this, I didn't.
> 
> Today I do a measurable about it. 
> 
> First I using 2.6.12 without dynamic enable and unplug the AC power,
> I check the /proc/pmu/battery_0, like this.
> --
>  flags      : 00000011
>  charge     : 907
>  max_charge : 2863
>  current    : -987
>  voltage    : 10950
>  time rem.  : 3600
> --
> I only intresting with current, that show the system power load. 
> 
> When I enable dynamic, The current can low at -900.

The numbers are repeatable ? I mean, if you actually let it settle down
in both cases ? Also, you should be careful about "parasites" in the
measurement, like pbbuttons dimming the backlight, the hard disk going
to sleep etc...

>From your numbers you get something like 10% improvement, which isn't
too bad.

Ben.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/