Problem: scsi/libata/sata

From: Rinaldi J. Montessi
Date: Mon Jul 04 2005 - 10:38:54 EST


About the time the SCSI subsystem is loaded the hard drive
activity light comes on and never goes out.

The disk is mounted and appears to function correctly:

mount
/dev/hda1 on / type ext2 (rw)
proc on /proc type proc (rw)
/dev/sda1 on /mnt/sda1 type ext3 (rw)
/dev/sda2 on /home type ext3 (rw)
/dev/sda3 on /usr type ext3 (rw)
/dev/sda6 on /storage type ext3 (rw)
/dev/hdb1 on /mnt/MM1 type ext3 (rw)
/dev/hdb2 on /mnt/MM2 type ext3 (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)

The motherboard is an ASUS P5DA2-E Deluxe (intel 925x chipset).

Western Digital and ASUS both recommended I check the jumper settings,
which I had done. ASUS also sent me a CD containing updates for the
Windows drivers. I don't use Windows, and presume the disk to be
not relevant to solving the problem.

The following is submitted per:

http://www.kernel.org/pub/linux/docs/lkml/reporting-bugs.html

Linux version 2.4.31-pre2 (root@Senior) (gcc version 3.3.5) #2 Fri May
13 12:21:03 EDT 2005

Linux Senior 2.4.31-pre2 #2 Fri May 13 12:21:03 EDT 2005 i686 unknown
unknown GNU/Linux

Gnu C 3.3.5
Gnu make 3.80
util-linux 2.12p
mount 2.12p
modutils 2.4.27
e2fsprogs 1.35
jfsutils 1.1.6
xfsprogs 2.6.13
pcmcia-cs 3.2.8
quota-tools 3.12.
PPP 2.4.2
Linux C Library 2.3.5
Dynamic linker (ldd) 2.3.5
Linux C++ Library 5.0.7
Procps 3.2.3
Net-tools 1.60
Kbd 1.12
Sh-utils 5.2.1
Modules Loaded smbus-arp eeprom i2c-proc i2c-isa i2c-i801
i2c-core snd-pcm-oss snd-mixer-oss snd-hda-intel snd-hda-codec snd-pcm
snd-timer snd snd-page-alloc soundcore nfsd lockd sunrpc ipt_MASQUERADE
iptable_mangle iptable_nat ipt_REJECT ipt_limit ipt_state ip_conntrack
ipt_LOG ipt_ULOG iptable_filter ip_tables af_packet ide-cd tulip crc32
sk98lin lp parport_pc parport

/proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 3
model name : Intel(R) Pentium(R) 4 CPU 3.40GHz
stepping : 4
cpu MHz : 3412.219
cache size : 1024 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe pni
monitor ds_cpl cid
bogomips : 6815.74

/proc/modules
smbus-arp 4816 0
eeprom 3564 0
i2c-proc 6084 0 [smbus-arp eeprom]
i2c-isa 772 0 (unused)
i2c-i801 4988 0 (unused)
i2c-core 15268 0 [smbus-arp eeprom i2c-proc i2c-isa
i2c-i801]
snd-pcm-oss 38272 0
snd-mixer-oss 13464 2 [snd-pcm-oss]
snd-hda-intel 7168 2
snd-hda-codec 38352 0 [snd-hda-intel]
snd-pcm 57992 0 [snd-pcm-oss snd-hda-intel snd-hda-codec]
snd-timer 14436 0 [snd-pcm]
snd 33284 0 [snd-pcm-oss snd-mixer-oss
snd-hda-intel snd-hda-codec snd-pcm snd-timer]
snd-page-alloc 5000 0 [snd-mixer-oss snd-hda-intel snd-pcm
snd-timer snd]
soundcore 3652 3 [snd]
nfsd 72560 8
lockd 48912 1 [nfsd]
sunrpc 67680 1 [nfsd lockd]
ipt_MASQUERADE 1464 1 (autoclean)
iptable_mangle 2168 0 (autoclean) (unused)
iptable_nat 17614 1 (autoclean) [ipt_MASQUERADE]
ipt_REJECT 3352 8 (autoclean)
ipt_limit 888 29 (autoclean)
ipt_state 536 4 (autoclean)
ip_conntrack 19460 0 (autoclean) [ipt_MASQUERADE iptable_nat
ipt_state]
ipt_LOG 3448 15 (autoclean)
ipt_ULOG 3588 12 (autoclean)
iptable_filter 1740 1 (autoclean)
ip_tables 12288 11 [ipt_MASQUERADE iptable_mangle
iptable_nat ipt_REJECT ipt_limit ipt_state ipt_LOG ipt_ULOG iptable_filter]
af_packet 13064 1 (autoclean)
ide-cd 31168 0
tulip 42304 1
crc32 2880 0 [tulip]
sk98lin 171824 1
lp 6660 0
parport_pc 16228 1
parport 24808 1 [lp parport_pc]

/proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
0400-041f : PCI device 8086:266a (Intel Corp.)
0400-040f : i801-smbus
0cf8-0cff : PCI conf1
9880-989f : PCI device 8086:2658 (Intel Corp.)
9c00-9c1f : PCI device 8086:2659 (Intel Corp.)
a000-a01f : PCI device 8086:265a (Intel Corp.)
a080-a09f : PCI device 8086:265b (Intel Corp.)
a400-a40f : PCI device 8086:2652 (Intel Corp.)
a400-a40f : ahci
a480-a483 : PCI device 8086:2652 (Intel Corp.)
a480-a483 : ahci
a800-a807 : PCI device 8086:2652 (Intel Corp.)
a800-a807 : ahci
a880-a883 : PCI device 8086:2652 (Intel Corp.)
a880-a883 : ahci
ac00-ac07 : PCI device 8086:2652 (Intel Corp.)
ac00-ac07 : ahci
b000-b00f : Promise Technology, Inc. 20268
b000-b007 : ide2
b008-b00f : ide3
b080-b083 : Promise Technology, Inc. 20268
b082-b082 : ide3
b400-b407 : Promise Technology, Inc. 20268
b400-b407 : ide3
b480-b483 : Promise Technology, Inc. 20268
b482-b482 : ide2
b800-b8ff : Linksys Network Everywhere Fast Ethernet 10/100 model NC100
b800-b8ff : tulip
bc00-bc07 : Promise Technology, Inc. 20268
bc00-bc07 : ide2
c000-cfff : PCI Bus #02
c800-c8ff : PCI device 11ab:4362 (Galileo Technology Ltd.)
c800-c8ff : sk98lin
d000-dfff : PCI Bus #03
e000-efff : PCI Bus #04
e000-e0ff : PCI device 1002:5b62 (ATI Technologies Inc)
ffa0-ffaf : PCI device 8086:266f (Intel Corp.)
ffa0-ffa7 : ide0
ffa8-ffaf : ide1

/proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cd000-000cefff : Extension ROM
000f0000-000fffff : System ROM
00100000-3ffaffff : System RAM
00100000-00236bbe : Kernel code
00236bbf-002a0ae3 : Kernel data
3ffb0000-3ffbdfff : ACPI Tables
3ffbe000-3ffeffff : ACPI Non-volatile Storage
3fff0000-3fffffff : reserved
cfcf4000-cfcf7fff : PCI device 8086:2668 (Intel Corp.)
cfcf4000-cfcf7fff : ICH HD audio
cfcff800-cfcffbff : PCI device 8086:265c (Intel Corp.)
cfcffc00-cfcfffff : PCI device 8086:2652 (Intel Corp.)
cfcffc00-cfcfffff : ahci
cfdf4000-cfdf7fff : Texas Instruments TSB43AB22/A IEEE-1394a-2000
Controller (PHY/Link)
cfdf8000-cfdfbfff : Promise Technology, Inc. 20268
cfdff000-cfdff7ff : Texas Instruments TSB43AB22/A IEEE-1394a-2000
Controller (PHY/Link)
cfdffc00-cfdfffff : Linksys Network Everywhere Fast Ethernet 10/100
model NC100
cfdffc00-cfdfffff : tulip
cfe00000-cfefffff : PCI Bus #02
cfefc000-cfefffff : PCI device 11ab:4362 (Galileo Technology Ltd.)
cfefc000-cfefffff : sk98lin
cff00000-cfffffff : PCI Bus #04
cffe0000-cffeffff : PCI device 1002:5b62 (ATI Technologies Inc)
cfff0000-cfffffff : PCI device 1002:5b72 (ATI Technologies Inc)
d0000000-dfffffff : PCI Bus #04
d0000000-dfffffff : PCI device 1002:5b62 (ATI Technologies Inc)
ffb00000-ffffffff : reserved

lspci -vvv

00:00.0 Host bridge: Intel Corp. Workstation Memory Controller Hub (rev 0e)
Subsystem: Intel Corp.: Unknown device 2580
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] #09 [0109]

00:01.0 PCI bridge: Intel Corp. Workstation Memory Controller Hub PCI
Express Port (rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 04
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: cff00000-cfffffff
Prefetchable memory behind bridge: d0000000-dfffffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [88] #0d [0000]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [a0] #10 [0141]

00:1b.0 Class 0403: Intel Corp.: Unknown device 2668 (rev 04)
Subsystem: Asustek Computer, Inc.: Unknown device 813d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 04
Interrupt: pin A routed to IRQ 16
Region 0: Memory at cfcf4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] #10 [0091]

00:1c.0 PCI bridge: Intel Corp. I/O Controller Hub PCI Express Port 0
(rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 04
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.1 PCI bridge: Intel Corp. I/O Controller Hub PCI Express Port 1
(rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 04
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: cfe00000-cfefffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1d.0 USB Controller: Intel Corp. I/O Controller Hub USB (rev 04)
(prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 9880 [size=32]

00:1d.1 USB Controller: Intel Corp. I/O Controller Hub USB (rev 04)
(prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 9c00 [size=32]

00:1d.2 USB Controller: Intel Corp. I/O Controller Hub USB (rev 04)
(prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at a000 [size=32]

00:1d.3 USB Controller: Intel Corp. I/O Controller Hub USB (rev 04)
(prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at a080 [size=32]

00:1d.7 USB Controller: Intel Corp. I/O Controller Hub USB2 (rev 04)
(prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at cfcff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #0a [20a0]

00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI
Bridge (rev d4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: cfd00000-cfdfffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] #0d [0000]

00:1f.0 ISA bridge: Intel Corp. I/O Controller Hub LPC (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:1f.1 IDE interface: Intel Corp. I/O Controller Hub PATA (rev 04)
(prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at ffa0 [size=16]

00:1f.2 Class 0106: Intel Corp. I/O Controller Hub SATA cc=raid (rev 04)
(prog-if 01)
Subsystem: Asustek Computer, Inc.: Unknown device 2606
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at ac00 [size=8]
Region 1: I/O ports at a880 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a480 [size=4]
Region 4: I/O ports at a400 [size=16]
Region 5: Memory at cfcffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1f.3 SMBus: Intel Corp. I/O Controller Hub SMBus (rev 04)
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 0400 [size=32]

01:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 808b
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), cache line size 04
Interrupt: pin A routed to IRQ 21
Region 0: Memory at cfdff000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at cfdf4000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:0a.0 Unknown mass storage controller: Promise Technology, Inc. 20268
(rev 01) (prog-if 85)
Subsystem: Promise Technology, Inc. Ultra100TX2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 4500ns max), cache line size 04
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at bc00 [size=8]
Region 1: I/O ports at b480 [size=4]
Region 2: I/O ports at b400 [size=8]
Region 3: I/O ports at b080 [size=4]
Region 4: I/O ports at b000 [size=16]
Region 5: Memory at cfdf8000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at cfde0000 [disabled] [size=16K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:0b.0 Ethernet controller: Linksys Network Everywhere Fast Ethernet
10/100 model NC100 (rev 11)
Subsystem: Linksys: Unknown device 0574
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (63750ns min, 63750ns max), cache line size 04
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at b800 [size=256]
Region 1: Memory at cfdffc00 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at cfdc0000 [disabled] [size=128K]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:00.0 Ethernet controller: Marvell: Unknown device 4362 (rev 19)
Subsystem: Asustek Computer, Inc.: Unknown device 8142
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR+ <PERR-
Latency: 0, cache line size 04
Interrupt: pin A routed to IRQ 17
Region 0: Memory at cfefc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at c800 [size=256]
Expansion ROM at cfec0000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [e0] #10 [0011]

04:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device
5b62 (prog-if 00 [VGA])
Subsystem: PC Partner Limited: Unknown device 0450
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 04
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at e000 [size=256]
Region 2: Memory at cffe0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at cffc0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #10 [0001]
Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000

04:00.1 Display controller: ATI Technologies Inc: Unknown device 5b72
Subsystem: PC Partner Limited: Unknown device 0451
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, cache line size 04
Region 0: Memory at cfff0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #10 [0001]

/proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: WDC WD1200JD-00H Rev: 08.0
Type: Direct-Access ANSI SCSI revision: 05

Rinaldi
--
The day after tomorrow is the third day of the rest of your life.




-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/