Re: IBM HDAPS things are looking up (was: Re: [Hdaps-devel] Re: [ltp]IBM HDAPS Someone interested? (Accelerometer))
From: Lenz Grimmer
Date: Mon Jul 04 2005 - 01:02:54 EST
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi Jesper,
Jesper Juhl wrote:
> I just had a nice chat with the guys there and we got some
> improvements made by them and us merged up. And I /think/ we agreed
> that I'll maintain the driver, merge fixes/features etc and eventually
> try to get it merged.
Thanks a ton! I am really excited to see that you guys made so much
progress over the past few days! Of course, I immediately had to give it
a try :)
> Currently the driver loads, initializes the accelerometer and we can
> read data from it.
And here is a first support request - the kernel module does not load
for me :(
I have a Thinkpad T42, running SUSE Linux 9.3 (Kernel 2.6.11 with SUSE
patches). The APS works on Windows, so I know the accelerometer is there.
I have downloaded the sources from your site mentioned below, ran "make"
and "make install". Then I created the /dev/hdaps0 device node by
running "mknod hdaps0 c 228 0". (I picked this out of another message in
the discussion)
However, running "modprobe ibm_hdaps" only yields an error:
FATAL: Error inserting ibm_hdaps
(/lib/modules/2.6.11.4-21.7-default/kernel/drivers/misc/ibm_hdaps.ko):
No such device or address
In /var/log/messages, I only see:
Jul 4 07:17:20 metis kernel: ibm_hdaps: unsupported module, tainting
kernel.
Jul 4 07:17:20 metis kernel: init 1 50239260
(The last number differs every time I load the module)
Passing "debug=1" did not really reveal any more info. How could I
provide you with more detail?
I also tried to load Henrik's module, but it also spits out an error
"failed to allocate I/O", then a long number of "latch_check" lines and
"initialize() ret: -5".
Maybe the accelerometer on the T42 uses a different port range? Or could
it be that some other kernel module is blocking this I/O range? I have
no clue...
> I'll be working on adding sysfs stuff to it tomorrow so it's generally
> useful (at least for monitoring things - not yet for parking disk
> heads).
Maybe there is some kind of all-purpose ATA command that instructs the
disk drive to park the heads? Jens, could you give us a hint on how a
userspace application would do that?
> Once I've got the sysfs stuff sorted I'll publish a new version.
>
> The most recent version of the driver is currently at
> http://lemonshop.dk/ibm_hpaps/ (note: this is most likely not going to
> be the permanent home of this driver, but it's where it lives for
> now).
Should we try to move the sources over to the hdaps.sf.net CVS tree?
Even though I am more a Subversion fan, having at least some kind of
version control would make it easier for others to participate and make
sure we can send patches against the latest version.
> Patches are welcome at jesper.juhl@xxxxxxxxx
Attached please find a diff against ibm_hdaps.c I found on the URL above
- - I moved some stuff to a separate header file (attached) and added
printing out the driver name and copyright during module initialization
(taken from Henrik's files). I also added an "uninstall" target to the
Makefile.
I hope you find it useful!
Bye,
LenZ
- --
- ------------------------------------------------------------------
Lenz Grimmer <lenz@xxxxxxxxxxx> -o)
[ICQ: 160767607 | Jabber: LenZGr@xxxxxxxxxx] /\\
http://www.lenzg.org/ V_V
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFCyNBpSVDhKrJykfIRAmLjAJwI1xaQEeW98M4yLVema2u+b9gX9wCfSufx
BuNm1Kcfk48FAn1e3pMa27M=
=yy24
-----END PGP SIGNATURE-----
--- ibm_hdaps.c.org 2005-07-04 07:33:17.000000000 +0200
+++ ibm_hdaps.c 2005-07-04 07:42:58.000000000 +0200
@@ -34,31 +34,18 @@
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/uaccess.h>
+#include "ibm_hdaps.h"
+#define DRV_NAME "ibm_hdaps"
+#define DRV_DESCRIPTION "IBM ThinkPad Accelerometer driver"
+#define DRV_COPYRIGHT "Copyright (c) 2005 Jesper Juhl <jesper.juhl@xxxxxxxxx>"
+#define DRV_VERSION "0.2"
-#define HDAPS_LOW_PORT 0x1600 /* first port used by accelerometer */
-#define HDAPS_NR_PORTS 0x30 /* nr of ports total - 0x1600 through 0x162f */
-
-#define STATE_STALE 0x00 /* accelerometer data is stale */
-#define STATE_FRESH 0x50 /* accelerometer data fresh fresh */
-
-#define REFRESH_ASYNC 0x00 /* do asynchronous refresh */
-#define REFRESH_SYNC 0x01 /* do synchronous refresh */
-
-/*
- * where to find the various accelerometer data
- * these map to the members of struct hdaps_accel_data
- */
-#define HDAPS_PORT_STATE 0x1611
-#define HDAPS_PORT_XACCEL 0x1612
-#define HDAPS_PORT_YACCEL 0x1614
-#define HDAPS_PORT_TEMP 0x1616
-#define HDAPS_PORT_XVAR 0x1617
-#define HDAPS_PORT_YVAR 0x1619
-#define HDAPS_PORT_TEMP2 0x161b
-#define HDAPS_PORT_UNKNOWN 0x161c
-#define HDAPS_PORT_KMACCT 0x161d
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR(DRV_COPYRIGHT);
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
static short debug = 0;
@@ -345,6 +332,9 @@
int retval;
struct hdaps_accel_data data;
+ printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
+ printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
+
printk(KERN_WARNING "init 1 %08ld\n", jiffies);
if (!request_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS, "ibm_hdaps"))
return -ENXIO;
@@ -367,7 +357,6 @@
}
if (0) for (i = 0; i < 50; i++) {
- int j;
unsigned long tmp;
accelerometer_read(&data);
printk(KERN_WARNING "state = %d\n", data.state);
@@ -405,8 +394,3 @@
module_init(ibm_hdaps_init);
module_exit(ibm_hdaps_exit);
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jesper Juhl");
-
-MODULE_DESCRIPTION("IBM ThinkPad Accelerometer driver");
-MODULE_VERSION("0.2");
/*
* Driver for IBM HDAPS (HardDisk Active Protection system)
*
* Based on the document by Mark A. Smith available at
* http://www.almaden.ibm.com/cs/people/marksmith/tpaps.html
*
* Copyright (c) 2005 Jesper Juhl <jesper.juhl@xxxxxxxxx>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#ifndef __IBM_HDAPS_H__
#define __IBM_HDAPS_H__
#define HDAPS_LOW_PORT 0x1600 /* first port used by accelerometer */
#define HDAPS_NR_PORTS 0x30 /* nr of ports total - 0x1600 through 0x162f */
#define STATE_STALE 0x00 /* accelerometer data is stale */
#define STATE_FRESH 0x50 /* accelerometer data fresh fresh */
#define REFRESH_ASYNC 0x00 /* do asynchronous refresh */
#define REFRESH_SYNC 0x01 /* do synchronous refresh */
/*
* where to find the various accelerometer data
* these map to the members of struct hdaps_accel_data
*/
#define HDAPS_PORT_STATE 0x1611
#define HDAPS_PORT_XACCEL 0x1612
#define HDAPS_PORT_YACCEL 0x1614
#define HDAPS_PORT_TEMP 0x1616
#define HDAPS_PORT_XVAR 0x1617
#define HDAPS_PORT_YVAR 0x1619
#define HDAPS_PORT_TEMP2 0x161b
#define HDAPS_PORT_UNKNOWN 0x161c
#define HDAPS_PORT_KMACCT 0x161d
#endif /* __IBM_HDAPS_H__ */
--- Makefile.org 2005-07-04 07:58:53.000000000 +0200
+++ Makefile 2005-07-04 07:57:50.000000000 +0200
@@ -26,3 +26,7 @@
install -d $(KMISC)
install -m 644 -c $(addsuffix .ko,$(list-m)) $(KMISC)
/sbin/depmod -a
+
+uninstall:
+ rm -f $(KMISC)/$(addsuffix .ko,$(list-m))
+ /sbin/depmod -a