Re: [ltp] IBM HDAPS Someone interested? (Accelerometer)
From: Jesper Juhl
Date: Sun Jul 03 2005 - 13:14:51 EST
Jesper Juhl wrote:
On 7/3/05, Vojtech Pavlik <vojtech@xxxxxxx> wrote:
On Sun, Jul 03, 2005 at 03:37:06AM -0500, Alejandro Bonilla wrote:
Guys,
We might have something here. If you are a driver writer, developer
or want to help us, this is when.
PLEASE read the following article, it has the data of a guy that made a
driver in IBM for Linux and he described the driver he made. He cannot
release it, but he explained it and someone can write one. Believe me,
that I would do it, if I would have any knowledge. ;-)
http://www.almaden.ibm.com/cs/people/marksmith/tpaps.html
This should indeed be enough to write a Linux driver.
I'll give it a shot. I've got the day off today so I'll try a simple
module and test it on my T42. I'll post whatever I come up with
tonight.
Ok, just to show you people what I've done so far.
This doesn't work yet, but it should be resonably close (at least it
builds ;)
Stuff the two (attached) files into some directory, then build with
make -C /path/to/kernel/source SUBDIRS=$PWD modules
it may blow up, it may do anything, I take no responsability for it in
its current state - play with it at your own risk.
--
Jesper Juhl
obj-m := ibm_hdaps.o
/*
* Driver for IBM HDAPS (HardDisk Active Protection system)
*
* Based on the document by Mark A. Smith available at
* http://www.almaden.ibm.com/cs/people/marksmith/tpaps.html
*
* Copyright (c) 2005 Jesper Juhl <jesper.juhl@xxxxxxxxx>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/config.h>
#include <linux/compiler.h>
#include <linux/ioport.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <asm/io.h>
#define HDAPS_LOW_PORT 0x1600 /* first port used by accelerometer */
#define HDAPS_NR_PORTS 0x30 /* nr of ports total - 0x1600 through 0x162f */
#define STATE_STALE 0x00 /* accelerometer data is stale */
#define STATE_FRESH 0x50 /* accelerometer data fresh fresh */
#define REFRESH_ASYNC 0x00 /* do asynchronous refresh */
#define REFRESH_SYNC 0x01 /* do synchronous refresh */
/*
* where to find the various accelerometer data
* these map to the members of struct hdaps_accel_data
*/
#define HDAPS_PORT_STATE 0x1611
#define HDAPS_PORT_XACCEL 0x1612
#define HDAPS_PORT_YACCEL 0x1614
#define HDAPS_PORT_TEMP 0x1616
#define HDAPS_PORT_XVAR 0x1617
#define HDAPS_PORT_YVAR 0x1619
#define HDAPS_PORT_TEMP2 0x161b
#define HDAPS_PORT_UNKNOWN 0x161c
#define HDAPS_PORT_KMACCT 0x161d
/* structure to hold data from the accelerometer */
struct hdaps_accel_data {
unsigned char state; /* accelerometer state */
unsigned short x_accel; /* X acceleration value */
unsigned short y_accel; /* Y acceleration value */
unsigned char temp; /* accelerometer temp (in celcius) */
unsigned short x_variation; /* this might hold something else */
unsigned short y_variation; /* this might hold something else */
unsigned char temp2; /* really the temperature again? */
unsigned char unknown; /* we don't know what this holds */
unsigned char km_activity; /* any keyboard/mouse activity */
};
/* check a port latch for a given value */
static unsigned int check_latch(unsigned short port, unsigned char val)
{
unsigned read;
read = inb(port & 0xff);
if (read == val)
return 1;
return 0;
}
/* wait for a latch to get a certain value for up to 50 microseconds */
static unsigned int wait_latch(unsigned short port, unsigned char val)
{
unsigned char i;
for (i = 0; i < 10; i++) {
if (check_latch(port, val))
return 1;
udelay(5);
}
return 0;
}
/* check the refresh state of the accelerometer */
unsigned int check_state(void)
{
unsigned state;
state = inb(0x1604);
if (state != STATE_FRESH)
state = STATE_STALE;
return state;
}
/* request a refresh from accelerometer */
static int request_refresh(int sync)
{
unsigned state;
state = check_state();
if (state == STATE_FRESH) {
return 1;
} else {
outb(0x1610, 0x11);
outb(0x161f, 0x01);
if (sync)
return wait_latch(0x1604, STATE_FRESH);
}
/* if we get here we didn't do a synchronous wait and all we can say
* is that we initiated the refresh request, so the state *ought* to
* be fresh when read next time - but no guarantees.
* Do a synchronous wait if you need to be sure you read fresh data.
*/
return 1;
}
/* indicate to the accelerometer that we are done reading data */
static void tell_accelerometer_done(void)
{
inb(0x161f);
inb(0x1604);
}
/* read accelerometer data into provided struct, return success or failure */
unsigned int accelerometer_read(struct hdaps_accel_data *data) {
/* do a sync refresh - we need to be sure we read fresh data */
if (!request_refresh(REFRESH_SYNC))
return 0;
data->state = inb(HDAPS_PORT_STATE);
data->x_accel = inw(HDAPS_PORT_XACCEL);
data->y_accel = inw(HDAPS_PORT_YACCEL);
data->temp = inb(HDAPS_PORT_TEMP);
data->x_variation = inw(HDAPS_PORT_XVAR);
data->y_variation = inw(HDAPS_PORT_YVAR);
data->temp2 = inb(HDAPS_PORT_TEMP2);
data->unknown = inb(HDAPS_PORT_UNKNOWN);
data->km_activity = inb(HDAPS_PORT_KMACCT);
tell_accelerometer_done();
return request_refresh(REFRESH_ASYNC);
}
/* initialize the accelerometer, wait up to `timeout' seconds for success */
int accelerometer_init(unsigned int timeout)
{
unsigned long wait_until = jiffies + timeout * HZ;
outb(0x13, 0x1610);
outb(0x01, 0x161f);
if (!wait_latch(0x00, 0x161f))
return -EIO;
if (!wait_latch(0x03, 0x1611))
return -EIO;
outb(0x17, 0x1610);
outb(0x81, 0x1611);
outb(0x01, 0x161f);
if (!wait_latch(0x00, 0x161f))
return -EIO;
if (!wait_latch(0x00, 0x1611))
return -EIO;
if (!wait_latch(0x60, 0x1612))
return -EIO;
if (!wait_latch(0x00, 0x1613))
return -EIO;
outb(0x14, 0x1610);
outb(0x01, 0x1611);
outb(0x01, 0x161f);
if (!wait_latch(0x00, 0x161f))
return -EIO;
outb(0x10, 0x1610);
outb(0xc8, 0x1611);
outb(0x00, 0x1612);
outb(0x02, 0x1613);
outb(0x01, 0x161f);
if (!wait_latch(0x00, 0x161f))
return -EIO;
if (!request_refresh(REFRESH_SYNC))
return -EIO;
if (!wait_latch(0x00, 0x1611))
return -EIO;
while (1) {
if (wait_latch(0x02, 0x1611)) {
struct hdaps_accel_data data;
/*
* accelerometer initialized, do an initial read and
* return success.
*/
accelerometer_read(&data);
return 0;
} else if (time_before(jiffies, wait_until)) {
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(HZ);
} else {
/* we timed out, return failure */
return -ENXIO;
}
}
}
static int ibm_hdaps_init(void)
{
int i;
int retval;
struct hdaps_accel_data data;
printk(KERN_WARNING "init 1\n");
if (!request_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS, "ibm_hdaps"))
return -ENXIO;
printk(KERN_WARNING "init 2\n");
retval = accelerometer_init(10);
if (retval)
return retval;
printk(KERN_WARNING "init 3\n");
for (i = 0; i < 5; i++) {
accelerometer_read(&data);
printk(KERN_WARNING "state = %d\n", data.state);
printk(KERN_WARNING "x_accel = %d\n", data.x_accel);
printk(KERN_WARNING "y_accel = %d\n", data.y_accel);
printk(KERN_WARNING "temp = %d\n", data.temp);
printk(KERN_WARNING "x_variation = %d\n", data.x_variation);
printk(KERN_WARNING "y_variation = %d\n", data.y_variation);
printk(KERN_WARNING "temp2 = %d\n", data.temp2);
printk(KERN_WARNING "unknown = %d\n", data.unknown);
printk(KERN_WARNING "km_activity = %d\n", data.km_activity);
printk(KERN_WARNING "\n");
}
printk(KERN_WARNING "init 4\n");
return 0;
}
static void ibm_hdaps_exit(void)
{
release_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS);
}
module_init(ibm_hdaps_init);
module_exit(ibm_hdaps_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jesper Juhl");