Re: [2.6.11.10][Ali15x3] Crash at startup after disks detection in DMA66 mode

[Bartlomiej Zolnierkiewicz]

On 6/3/05, THESNIERES Sylvain <tmsec@xxxxxxx> wrote:
> Hello. I used the kernel 2.6.10-gentoo-rc9 with my notebook (Pentium 4-M, no
> trademark), it worked fine and I updated to 2.6.11.10 with fbsplash patch, and
> now DMA causes the system to crash at boot time. I can't dump any message,

Could you elaborate on "DMA causes the system to crash"?

Does 2.6.10-rc5 work for you?

> because my screen get flooded with the folowing one:
> 
> Free on bad allocation ressource <0000042>-<0000042>
> 
> It justs occurs after detection of the hard drive, and only if I activate
> idebus=66 or ata0=66 parameters on command line. I have enabled Ali15x3 support

You shouldn't be using "idebus=66" parameter unless your PCI bus is 66MHz.
There is no "ata0=66" parameter, maybe you've meant "ide0=66" ?

> on the kernel and DMA support. The problem disappears if I disable the 66 mode,
> but It worked before on the 2.6.10 kernel, so I don't think it is the same

dmesg output for 2.6.10 please

> problem as the one related to the last patch I saw for this driver:
> 
> [quote]
>     [PATCH] ide-disk: Fix LBA8 DMA
> 
>     This is from Gentoo's 2.6.11 patchset. A problem was introduced in 2.6.10
>     where some users could not enable DMA on their disks (particularly ALi15x3
>     users). This was a small mistake with the no_lba48_dma flag.
> [/quote]

Yep, this shouldn't be related.

Thanks,
Bartlomiej
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/