Re: PROBLEM: ICH6M not recognised as being AHCI capable (libata)

[Erik Slagter]

On Wed, 2005-05-18 at 14:18 -0400, Jeff Garzik wrote:
> Erik Slagter wrote:
> > 1. ICH6M not recognised as being AHCI capable (libata)
> > 
> > 2. During startup, libata refuses to talk to the ICH6 using AHCI, I get
> > these messages: 
> > 
> > libata version 1.10 loaded.
> > ahci version 1.00
> > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 201
> > ahci: probe of 0000:00:1f.2 failed with error -12
> > ata_piix version 1.03
> > 
> > [-12 == ENOMEM???]
> 
> You need to either load ata_piix driver, or tell your BIOS to initialize 
> AHCI mode.

I do have ata_piix loaded (as you can see in the log). I don't have a
BIOS option to enable AHCI mode, I was hoping linux could force it
somehow.

BTW It works using the ata_piix driver (in legacy mode), but of course
I'd rather have the AHCI mode.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/