Re: [Fastboot] Fw: Re: kexec?

[Alexander Nyberg]

> > > I've been doing some kexec tests (as described in Documentation/kdump.txt) too
> > > but can't get to load the image and get similar error messages. Let me know
> > > if you need more info about the hardware. The first_kernel was booted with
> > > "crashkernel=64M@16M" and the 16M value was configured into the second during
> > > kconfig in "Physical address where the kernel is loaded" as 0x1000000.
> > > 
> > > [root@zmei]: kexec -p vmlinux --args-linux --append="root=/dev/hda1 maxcpus=1
> > > init 1"
> > 
> >  kexec-tools-1.101 loads for me, but if cmdline is used, it hangs up
> > after "Starting new kernel"
> 
> maxcpus=1 is the culprit. Even through bios/grub kernel does not boot with 
> option maxcpus=1. It is a known issue with got notieced 2.6.12-rc2-mm1 onwards. 
> So build second kernel as uniprocessor kernel and don't specify maxcpus=1 and 
> test it out. It should work.
> 

Vivek,

kexec-tools-1.101 does not contain your last patch series (that includes
--crashdump which is lacking from the above cmdline). Currently you need
to patch up 1.101 with the stuff from 
[RFC/PATCH 5/17][kexec-tools-1.101] Add command line option
"--crash-dump" etc.

It would be good having a 1.2 or something with the patches included on
the site...

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/