[PATCH] Whitespace clenups for drivers/eisa/
From: Jesper Juhl
Date: Sun May 08 2005 - 17:39:27 EST
Remove spaces between function names and opening parenthesis.
Those space are not in line with Documentation/CodingStyle and they really
get on my nerves as well when reading the code, so I desided to get rid of
them. :)
A blank line also met its maker and some stuff got moved to a single line
instead of two.
Please consider applying.
Signed-off-by: Jesper Juhl <juhl-lkml@xxxxxx>
---
drivers/eisa/eisa-bus.c | 205 +++++++++++++++++++++-----------------------
drivers/eisa/pci_eisa.c | 18 +--
drivers/eisa/virtual_root.c | 16 +--
3 files changed, 118 insertions(+), 121 deletions(-)
diff -upr linux-2.6.12-rc3-mm3-orig/drivers/eisa/eisa-bus.c linux-2.6.12-rc3-mm3/drivers/eisa/eisa-bus.c
--- linux-2.6.12-rc3-mm3-orig/drivers/eisa/eisa-bus.c 2005-03-02 08:37:52.000000000 +0100
+++ linux-2.6.12-rc3-mm3/drivers/eisa/eisa-bus.c 2005-05-09 00:31:52.000000000 +0200
@@ -39,10 +39,10 @@ static int enable_dev_count;
static int disable_dev[EISA_MAX_FORCED_DEV];
static int disable_dev_count;
-static int is_forced_dev (int *forced_tab,
- int forced_count,
- struct eisa_root_device *root,
- struct eisa_device *edev)
+static int is_forced_dev(int *forced_tab,
+ int forced_count,
+ struct eisa_root_device *root,
+ struct eisa_device *edev)
{
int i, x;
@@ -55,21 +55,21 @@ static int is_forced_dev (int *forced_ta
return 0;
}
-static void __init eisa_name_device (struct eisa_device *edev)
+static void __init eisa_name_device(struct eisa_device *edev)
{
#ifdef CONFIG_EISA_NAMES
int i;
for (i = 0; i < EISA_INFOS; i++) {
if (!strcmp (edev->id.sig, eisa_table[i].id.sig)) {
- strlcpy (edev->pretty_name,
- eisa_table[i].name,
- DEVICE_NAME_SIZE);
+ strlcpy(edev->pretty_name,
+ eisa_table[i].name,
+ DEVICE_NAME_SIZE);
return;
}
}
/* No name was found */
- sprintf (edev->pretty_name, "EISA device %.7s", edev->id.sig);
+ sprintf(edev->pretty_name, "EISA device %.7s", edev->id.sig);
#endif
}
@@ -106,22 +106,21 @@ static char __init *decode_eisa_sig(unsi
return sig_str;
}
-static int eisa_bus_match (struct device *dev, struct device_driver *drv)
+static int eisa_bus_match(struct device *dev, struct device_driver *drv)
{
- struct eisa_device *edev = to_eisa_device (dev);
- struct eisa_driver *edrv = to_eisa_driver (drv);
+ struct eisa_device *edev = to_eisa_device(dev);
+ struct eisa_driver *edrv = to_eisa_driver(drv);
const struct eisa_device_id *eids = edrv->id_table;
if (!eids)
return 0;
- while (strlen (eids->sig)) {
- if (!strcmp (eids->sig, edev->id.sig) &&
+ while (strlen(eids->sig)) {
+ if (!strcmp(eids->sig, edev->id.sig) &&
edev->state & EISA_CONFIG_ENABLED) {
edev->id.driver_data = eids->driver_data;
return 1;
}
-
eids++;
}
@@ -133,62 +132,62 @@ struct bus_type eisa_bus_type = {
.match = eisa_bus_match,
};
-int eisa_driver_register (struct eisa_driver *edrv)
+int eisa_driver_register(struct eisa_driver *edrv)
{
int r;
edrv->driver.bus = &eisa_bus_type;
- if ((r = driver_register (&edrv->driver)) < 0)
+ if ((r = driver_register(&edrv->driver)) < 0)
return r;
return 0;
}
-void eisa_driver_unregister (struct eisa_driver *edrv)
+void eisa_driver_unregister(struct eisa_driver *edrv)
{
- driver_unregister (&edrv->driver);
+ driver_unregister(&edrv->driver);
}
-static ssize_t eisa_show_sig (struct device *dev, char *buf)
+static ssize_t eisa_show_sig(struct device *dev, char *buf)
{
- struct eisa_device *edev = to_eisa_device (dev);
- return sprintf (buf,"%s\n", edev->id.sig);
+ struct eisa_device *edev = to_eisa_device(dev);
+ return sprintf(buf,"%s\n", edev->id.sig);
}
static DEVICE_ATTR(signature, S_IRUGO, eisa_show_sig, NULL);
-static ssize_t eisa_show_state (struct device *dev, char *buf)
+static ssize_t eisa_show_state(struct device *dev, char *buf)
{
struct eisa_device *edev = to_eisa_device (dev);
- return sprintf (buf,"%d\n", edev->state & EISA_CONFIG_ENABLED);
+ return sprintf(buf,"%d\n", edev->state & EISA_CONFIG_ENABLED);
}
static DEVICE_ATTR(enabled, S_IRUGO, eisa_show_state, NULL);
-static int __init eisa_init_device (struct eisa_root_device *root,
- struct eisa_device *edev,
- int slot)
+static int __init eisa_init_device(struct eisa_root_device *root,
+ struct eisa_device *edev,
+ int slot)
{
char *sig;
unsigned long sig_addr;
int i;
- sig_addr = SLOT_ADDRESS (root, slot) + EISA_VENDOR_ID_OFFSET;
+ sig_addr = SLOT_ADDRESS(root, slot) + EISA_VENDOR_ID_OFFSET;
- if (!(sig = decode_eisa_sig (sig_addr)))
+ if (!(sig = decode_eisa_sig(sig_addr)))
return -1; /* No EISA device here */
- memcpy (edev->id.sig, sig, EISA_SIG_LEN);
+ memcpy(edev->id.sig, sig, EISA_SIG_LEN);
edev->slot = slot;
- edev->state = inb (SLOT_ADDRESS (root, slot) + EISA_CONFIG_OFFSET) & EISA_CONFIG_ENABLED;
- edev->base_addr = SLOT_ADDRESS (root, slot);
+ edev->state = inb(SLOT_ADDRESS(root, slot) + EISA_CONFIG_OFFSET) & EISA_CONFIG_ENABLED;
+ edev->base_addr = SLOT_ADDRESS(root, slot);
edev->dma_mask = root->dma_mask; /* Default DMA mask */
- eisa_name_device (edev);
+ eisa_name_device(edev);
edev->dev.parent = root->dev;
edev->dev.bus = &eisa_bus_type;
edev->dev.dma_mask = &edev->dma_mask;
edev->dev.coherent_dma_mask = edev->dma_mask;
- sprintf (edev->dev.bus_id, "%02X:%02X", root->bus_nr, slot);
+ sprintf(edev->dev.bus_id, "%02X:%02X", root->bus_nr, slot);
for (i = 0; i < EISA_MAX_RESOURCES; i++) {
#ifdef CONFIG_EISA_NAMES
@@ -198,29 +197,29 @@ static int __init eisa_init_device (stru
#endif
}
- if (is_forced_dev (enable_dev, enable_dev_count, root, edev))
+ if (is_forced_dev(enable_dev, enable_dev_count, root, edev))
edev->state = EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED;
- if (is_forced_dev (disable_dev, disable_dev_count, root, edev))
+ if (is_forced_dev(disable_dev, disable_dev_count, root, edev))
edev->state = EISA_CONFIG_FORCED;
return 0;
}
-static int __init eisa_register_device (struct eisa_device *edev)
+static int __init eisa_register_device(struct eisa_device *edev)
{
- if (device_register (&edev->dev))
+ if (device_register(&edev->dev))
return -1;
- device_create_file (&edev->dev, &dev_attr_signature);
- device_create_file (&edev->dev, &dev_attr_enabled);
+ device_create_file(&edev->dev, &dev_attr_signature);
+ device_create_file(&edev->dev, &dev_attr_enabled);
return 0;
}
-static int __init eisa_request_resources (struct eisa_root_device *root,
- struct eisa_device *edev,
- int slot)
+static int __init eisa_request_resources(struct eisa_root_device *root,
+ struct eisa_device *edev,
+ int slot)
{
int i;
@@ -238,137 +237,135 @@ static int __init eisa_request_resources
if (slot) {
edev->res[i].name = NULL;
- edev->res[i].start = SLOT_ADDRESS (root, slot) + (i * 0x400);
+ edev->res[i].start = SLOT_ADDRESS(root, slot) + (i * 0x400);
edev->res[i].end = edev->res[i].start + 0xff;
edev->res[i].flags = IORESOURCE_IO;
} else {
edev->res[i].name = NULL;
- edev->res[i].start = SLOT_ADDRESS (root, slot) + EISA_VENDOR_ID_OFFSET;
+ edev->res[i].start = SLOT_ADDRESS(root, slot) + EISA_VENDOR_ID_OFFSET;
edev->res[i].end = edev->res[i].start + 3;
edev->res[i].flags = IORESOURCE_BUSY;
}
- if (request_resource (root->res, &edev->res[i]))
+ if (request_resource(root->res, &edev->res[i]))
goto failed;
}
return 0;
- failed:
+failed:
while (--i >= 0)
- release_resource (&edev->res[i]);
+ release_resource(&edev->res[i]);
return -1;
}
-static void __init eisa_release_resources (struct eisa_device *edev)
+static void __init eisa_release_resources(struct eisa_device *edev)
{
int i;
for (i = 0; i < EISA_MAX_RESOURCES; i++)
if (edev->res[i].start || edev->res[i].end)
- release_resource (&edev->res[i]);
+ release_resource(&edev->res[i]);
}
-static int __init eisa_probe (struct eisa_root_device *root)
+static int __init eisa_probe(struct eisa_root_device *root)
{
int i, c;
struct eisa_device *edev;
- printk (KERN_INFO "EISA: Probing bus %d at %s\n",
- root->bus_nr, root->dev->bus_id);
+ printk(KERN_INFO "EISA: Probing bus %d at %s\n",
+ root->bus_nr, root->dev->bus_id);
/* First try to get hold of slot 0. If there is no device
* here, simply fail, unless root->force_probe is set. */
- if (!(edev = kmalloc (sizeof (*edev), GFP_KERNEL))) {
- printk (KERN_ERR "EISA: Couldn't allocate mainboard slot\n");
+ if (!(edev = kmalloc(sizeof(*edev), GFP_KERNEL))) {
+ printk(KERN_ERR "EISA: Couldn't allocate mainboard slot\n");
return -ENOMEM;
}
- memset (edev, 0, sizeof (*edev));
+ memset(edev, 0, sizeof (*edev));
- if (eisa_request_resources (root, edev, 0)) {
- printk (KERN_WARNING \
- "EISA: Cannot allocate resource for mainboard\n");
- kfree (edev);
+ if (eisa_request_resources(root, edev, 0)) {
+ printk(KERN_WARNING \
+ "EISA: Cannot allocate resource for mainboard\n");
+ kfree(edev);
if (!root->force_probe)
return -EBUSY;
goto force_probe;
}
- if (eisa_init_device (root, edev, 0)) {
- eisa_release_resources (edev);
- kfree (edev);
+ if (eisa_init_device(root, edev, 0)) {
+ eisa_release_resources(edev);
+ kfree(edev);
if (!root->force_probe)
return -ENODEV;
goto force_probe;
}
- printk (KERN_INFO "EISA: Mainboard %s detected.\n", edev->id.sig);
+ printk(KERN_INFO "EISA: Mainboard %s detected.\n", edev->id.sig);
- if (eisa_register_device (edev)) {
- printk (KERN_ERR "EISA: Failed to register %s\n",
- edev->id.sig);
- eisa_release_resources (edev);
- kfree (edev);
+ if (eisa_register_device(edev)) {
+ printk(KERN_ERR "EISA: Failed to register %s\n", edev->id.sig);
+ eisa_release_resources(edev);
+ kfree(edev);
}
force_probe:
for (c = 0, i = 1; i <= root->slots; i++) {
- if (!(edev = kmalloc (sizeof (*edev), GFP_KERNEL))) {
- printk (KERN_ERR "EISA: Out of memory for slot %d\n",
- i);
+ if (!(edev = kmalloc(sizeof(*edev), GFP_KERNEL))) {
+ printk(KERN_ERR "EISA: Out of memory for slot %d\n", i);
continue;
}
- memset (edev, 0, sizeof (*edev));
+ memset(edev, 0, sizeof(*edev));
- if (eisa_request_resources (root, edev, i)) {
- printk (KERN_WARNING \
- "Cannot allocate resource for EISA slot %d\n",
- i);
- kfree (edev);
+ if (eisa_request_resources(root, edev, i)) {
+ printk(KERN_WARNING \
+ "Cannot allocate resource for EISA slot %d\n",
+ i);
+ kfree(edev);
continue;
}
- if (eisa_init_device (root, edev, i)) {
- eisa_release_resources (edev);
- kfree (edev);
+ if (eisa_init_device(root, edev, i)) {
+ eisa_release_resources(edev);
+ kfree(edev);
continue;
}
- printk (KERN_INFO "EISA: slot %d : %s detected",
- i, edev->id.sig);
+ printk(KERN_INFO "EISA: slot %d : %s detected", i,
+ edev->id.sig);
switch (edev->state) {
case EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED:
- printk (" (forced enabled)");
+ printk(" (forced enabled)");
break;
case EISA_CONFIG_FORCED:
- printk (" (forced disabled)");
+ printk(" (forced disabled)");
break;
case 0:
- printk (" (disabled)");
+ printk(" (disabled)");
break;
}
- printk (".\n");
+ printk(".\n");
c++;
if (eisa_register_device (edev)) {
- printk (KERN_ERR "EISA: Failed to register %s\n",
- edev->id.sig);
- eisa_release_resources (edev);
- kfree (edev);
+ printk(KERN_ERR "EISA: Failed to register %s\n",
+ edev->id.sig);
+ eisa_release_resources(edev);
+ kfree(edev);
}
}
- printk (KERN_INFO "EISA: Detected %d card%s.\n", c, c == 1 ? "" : "s");
+ printk(KERN_INFO "EISA: Detected %d card%s.\n", c, c == 1 ? "" : "s");
return 0;
}
@@ -382,7 +379,7 @@ static struct resource eisa_root_res = {
static int eisa_bus_count;
-int __init eisa_root_register (struct eisa_root_device *root)
+int __init eisa_root_register(struct eisa_root_device *root)
{
int err;
@@ -396,35 +393,35 @@ int __init eisa_root_register (struct ei
root->eisa_root_res.end = root->res->end;
root->eisa_root_res.flags = IORESOURCE_BUSY;
- if ((err = request_resource (&eisa_root_res, &root->eisa_root_res)))
+ if ((err = request_resource(&eisa_root_res, &root->eisa_root_res)))
return err;
root->bus_nr = eisa_bus_count++;
- if ((err = eisa_probe (root)))
- release_resource (&root->eisa_root_res);
+ if ((err = eisa_probe(root)))
+ release_resource(&root->eisa_root_res);
return err;
}
-static int __init eisa_init (void)
+static int __init eisa_init(void)
{
int r;
- if ((r = bus_register (&eisa_bus_type)))
+ if ((r = bus_register(&eisa_bus_type)))
return r;
- printk (KERN_INFO "EISA bus registered\n");
+ printk(KERN_INFO "EISA bus registered\n");
return 0;
}
module_param_array(enable_dev, int, &enable_dev_count, 0444);
module_param_array(disable_dev, int, &disable_dev_count, 0444);
-postcore_initcall (eisa_init);
+postcore_initcall(eisa_init);
int EISA_bus; /* for legacy drivers */
-EXPORT_SYMBOL (EISA_bus);
-EXPORT_SYMBOL (eisa_bus_type);
-EXPORT_SYMBOL (eisa_driver_register);
-EXPORT_SYMBOL (eisa_driver_unregister);
+EXPORT_SYMBOL(EISA_bus);
+EXPORT_SYMBOL(eisa_bus_type);
+EXPORT_SYMBOL(eisa_driver_register);
+EXPORT_SYMBOL(eisa_driver_unregister);
diff -upr linux-2.6.12-rc3-mm3-orig/drivers/eisa/pci_eisa.c linux-2.6.12-rc3-mm3/drivers/eisa/pci_eisa.c
--- linux-2.6.12-rc3-mm3-orig/drivers/eisa/pci_eisa.c 2005-04-30 18:24:55.000000000 +0200
+++ linux-2.6.12-rc3-mm3/drivers/eisa/pci_eisa.c 2005-05-09 00:32:50.000000000 +0200
@@ -19,14 +19,14 @@
/* There is only *one* pci_eisa device per machine, right ? */
static struct eisa_root_device pci_eisa_root;
-static int __devinit pci_eisa_init (struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int __devinit pci_eisa_init(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
int rc;
- if ((rc = pci_enable_device (pdev))) {
- printk (KERN_ERR "pci_eisa : Could not enable device %s\n",
- pci_name(pdev));
+ if ((rc = pci_enable_device(pdev))) {
+ printk(KERN_ERR "pci_eisa : Could not enable device %s\n",
+ pci_name(pdev));
return rc;
}
@@ -37,8 +37,8 @@ static int __devinit pci_eisa_init (stru
pci_eisa_root.slots = EISA_MAX_SLOTS;
pci_eisa_root.dma_mask = pdev->dma_mask;
- if (eisa_root_register (&pci_eisa_root)) {
- printk (KERN_ERR "pci_eisa : Could not register EISA root\n");
+ if (eisa_root_register(&pci_eisa_root)) {
+ printk(KERN_ERR "pci_eisa : Could not register EISA root\n");
return -1;
}
@@ -57,9 +57,9 @@ static struct pci_driver pci_eisa_driver
.probe = pci_eisa_init,
};
-static int __init pci_eisa_init_module (void)
+static int __init pci_eisa_init_module(void)
{
- return pci_register_driver (&pci_eisa_driver);
+ return pci_register_driver(&pci_eisa_driver);
}
device_initcall(pci_eisa_init_module);
diff -upr linux-2.6.12-rc3-mm3-orig/drivers/eisa/virtual_root.c linux-2.6.12-rc3-mm3/drivers/eisa/virtual_root.c
--- linux-2.6.12-rc3-mm3-orig/drivers/eisa/virtual_root.c 2005-03-02 08:38:17.000000000 +0100
+++ linux-2.6.12-rc3-mm3/drivers/eisa/virtual_root.c 2005-05-09 00:33:50.000000000 +0200
@@ -22,7 +22,7 @@
#endif
static int force_probe = EISA_FORCE_PROBE_DEFAULT;
-static void virtual_eisa_release (struct device *);
+static void virtual_eisa_release(struct device *);
/* The default EISA device parent (virtual root device).
* Now use a platform device, since that's the obvious choice. */
@@ -43,16 +43,16 @@ static struct eisa_root_device eisa_bus_
.dma_mask = 0xffffffff,
};
-static void virtual_eisa_release (struct device *dev)
+static void virtual_eisa_release(struct device *dev)
{
/* nothing really to do here */
}
-static int virtual_eisa_root_init (void)
+static int virtual_eisa_root_init(void)
{
int r;
- if ((r = platform_device_register (&eisa_root_dev))) {
+ if ((r = platform_device_register(&eisa_root_dev))) {
return r;
}
@@ -60,16 +60,16 @@ static int virtual_eisa_root_init (void)
eisa_root_dev.dev.driver_data = &eisa_bus_root;
- if (eisa_root_register (&eisa_bus_root)) {
+ if (eisa_root_register(&eisa_bus_root)) {
/* A real bridge may have been registered before
* us. So quietly unregister. */
- platform_device_unregister (&eisa_root_dev);
+ platform_device_unregister(&eisa_root_dev);
return -1;
}
return 0;
}
-module_param (force_probe, int, 0444);
+module_param(force_probe, int, 0444);
-device_initcall (virtual_eisa_root_init);
+device_initcall(virtual_eisa_root_init);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/