Error 14 occurred at disk power-on lifetime: 2249 hours (93 days + 17
hours)
When the command that caused the error occurred, the device was doing
SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 f8 23 3e 56 e0 Error: UNC at LBA = 0x00563e23 = 5652003
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
24 00 f8 07 3e 56 10 00 00:36:28.850 READ SECTOR(S) EXT
25 00 00 ff 3d 56 10 00 00:36:28.850 READ DMA EXT
25 00 00 ff 3c 56 10 00 00:36:28.850 READ DMA EXT
25 00 00 ff 3b 56 10 00 00:36:28.850 READ DMA EXT
25 00 00 ff 3a 56 10 00 00:36:28.850 READ DMA EXT
Could you please explain what these errors mean exactly and what may
have caused them?
Might it be possible that these transmission/xxx errors be caused by a bad card and/or driver?
I'm asking this as the disk never showed errors on onboard IDE ports.
Nils