Re: [SATA] libata-dev queue updated
From: Jeff Garzik
Date: Fri Mar 04 2005 - 02:18:00 EST
Joerg Sommrey wrote:
On Thu, Mar 03, 2005 at 11:09:26PM -0500, Jeff Garzik wrote:
Joerg Sommrey wrote:
On Wed, Mar 02, 2005 at 05:43:59PM -0500, Jeff Garzik wrote:
Joerg Sommrey wrote:
Jeff Garzik wrote:
Patch:
http://www.kernel.org/pub/linux/kernel/people/jgarzik/libata/2.6.11-rc5-bk4-libata-dev1.patch.bz2
Still not usable here. The same errors as before when backing up:
Please try 2.6.11 without any patches.
Plain 2.6.11 doesn't work either. All of 2.6.10-ac11, 2.6.11-rc5,
2.6.11-rc5 + 2.6.11-rc5-bk4-libata-dev1.patch and 2.6.11 fail with the
same symptoms.
Reverting to stable 2.6.10-ac8 :-)
Does reverting the attached patch in 2.6.11 (apply with patch -R) fix
things?
Still the same with this patch reverted.
Does reverting the attached patch in 2.6.11 fix things? (apply with
patch -R)
This patch reverts the entire libata back to 2.6.10.
Jeff
diff -Nru a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
--- a/drivers/scsi/ahci.c 2005-03-01 23:38:53 -08:00
+++ b/drivers/scsi/ahci.c 2005-03-01 23:38:53 -08:00
@@ -179,6 +179,7 @@
static void ahci_host_stop(struct ata_host_set *host_set);
static void ahci_qc_prep(struct ata_queued_cmd *qc);
static u8 ahci_check_status(struct ata_port *ap);
+static u8 ahci_check_err(struct ata_port *ap);
static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
static Scsi_Host_Template ahci_sht = {
@@ -204,6 +205,8 @@
.port_disable = ata_port_disable,
.check_status = ahci_check_status,
+ .check_altstatus = ahci_check_status,
+ .check_err = ahci_check_err,
.dev_select = ata_noop_dev_select,
.phy_reset = ahci_phy_reset,
@@ -239,9 +242,19 @@
static struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VENDOR_ID_INTEL, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- board_ahci },
+ board_ahci }, /* ICH6 */
{ PCI_VENDOR_ID_INTEL, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- board_ahci },
+ board_ahci }, /* ICH6M */
+ { PCI_VENDOR_ID_INTEL, 0x27c1, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ICH7 */
+ { PCI_VENDOR_ID_INTEL, 0x27c5, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ICH7M */
+ { PCI_VENDOR_ID_INTEL, 0x27c2, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ICH7R */
+ { PCI_VENDOR_ID_INTEL, 0x27c3, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ICH7R */
+ { PCI_VENDOR_ID_AL, 0x5288, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_ahci }, /* ULi M5288 */
{ } /* terminate list */
};
@@ -442,6 +455,13 @@
return readl(mmio + PORT_TFDATA) & 0xFF;
}
+static u8 ahci_check_err(struct ata_port *ap)
+{
+ void *mmio = (void *) ap->ioaddr.cmd_addr;
+
+ return (readl(mmio + PORT_TFDATA) >> 8) & 0xFF;
+}
+
static void ahci_fill_sg(struct ata_queued_cmd *qc)
{
struct ahci_port_priv *pp = qc->ap->private_data;
@@ -509,15 +529,6 @@
ahci_fill_sg(qc);
}
-static inline void ahci_dma_complete (struct ata_port *ap,
- struct ata_queued_cmd *qc,
- int have_err)
-{
- /* get drive status; clear intr; complete txn */
- ata_qc_complete(ata_qc_from_tag(ap, ap->active_tag),
- have_err ? ATA_ERR : 0);
-}
-
static void ahci_intr_error(struct ata_port *ap, u32 irq_stat)
{
void *mmio = ap->host_set->mmio_base;
@@ -939,6 +950,7 @@
unsigned long base;
void *mmio_base;
unsigned int board_idx = (unsigned int) ent->driver_data;
+ int pci_dev_busy = 0;
int rc;
VPRINTK("ENTER\n");
@@ -951,8 +963,10 @@
return rc;
rc = pci_request_regions(pdev, DRV_NAME);
- if (rc)
+ if (rc) {
+ pci_dev_busy = 1;
goto err_out;
+ }
pci_enable_intx(pdev);
@@ -1014,7 +1028,8 @@
err_out_regions:
pci_release_regions(pdev);
err_out:
- pci_disable_device(pdev);
+ if (!pci_dev_busy)
+ pci_disable_device(pdev);
return rc;
}
diff -Nru a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
--- a/drivers/scsi/ata_piix.c 2005-03-01 23:39:18 -08:00
+++ b/drivers/scsi/ata_piix.c 2005-03-01 23:39:18 -08:00
@@ -60,6 +60,7 @@
piix4_pata = 2,
ich6_sata = 3,
ich6_sata_rm = 4,
+ ich7_sata = 5,
};
static int piix_init_one (struct pci_dev *pdev,
@@ -90,6 +91,8 @@
{ 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
{ 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_rm },
{ 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_rm },
+ { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7_sata },
+ { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7_sata },
{ } /* terminate list */
};
@@ -135,6 +138,8 @@
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
@@ -160,6 +165,8 @@
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
@@ -226,6 +233,18 @@
},
/* ich6_sata_rm */
+ {
+ .sht = &piix_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
+ PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR |
+ ATA_FLAG_SLAVE_POSS | PIIX_FLAG_AHCI,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x7f, /* udma0-6 */
+ .port_ops = &piix_sata_ops,
+ },
+
+ /* ich7_sata */
{
.sht = &piix_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
diff -Nru a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
--- a/drivers/scsi/libata-core.c 2005-03-01 23:38:44 -08:00
+++ b/drivers/scsi/libata-core.c 2005-03-01 23:38:44 -08:00
@@ -28,6 +28,7 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/list.h>
+#include <linux/mm.h>
#include <linux/highmem.h>
#include <linux/spinlock.h>
#include <linux/blkdev.h>
@@ -376,7 +377,7 @@
}
/**
- * ata_check_status - Read device status reg & clear interrupt
+ * ata_check_status_pio - Read device status reg & clear interrupt
* @ap: port where the device is
*
* Reads ATA taskfile status register for currently-selected device
@@ -414,6 +415,27 @@
return ata_check_status_pio(ap);
}
+u8 ata_altstatus(struct ata_port *ap)
+{
+ if (ap->ops->check_altstatus)
+ return ap->ops->check_altstatus(ap);
+
+ if (ap->flags & ATA_FLAG_MMIO)
+ return readb((void __iomem *)ap->ioaddr.altstatus_addr);
+ return inb(ap->ioaddr.altstatus_addr);
+}
+
+u8 ata_chk_err(struct ata_port *ap)
+{
+ if (ap->ops->check_err)
+ return ap->ops->check_err(ap);
+
+ if (ap->flags & ATA_FLAG_MMIO) {
+ return readb((void __iomem *) ap->ioaddr.error_addr);
+ }
+ return inb(ap->ioaddr.error_addr);
+}
+
/**
* ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
* @tf: Taskfile to convert
@@ -1160,7 +1182,6 @@
printk(KERN_WARNING "ata%u: dev %u not supported, ignoring\n",
ap->id, device);
err_out:
- ata_irq_on(ap); /* re-enable interrupts */
dev->class++; /* converts ATA_DEV_xxx into ATA_DEV_xxx_UNSUP */
DPRINTK("EXIT, err\n");
}
@@ -1668,7 +1689,8 @@
ata_dev_try_classify(ap, 1);
/* re-enable interrupts */
- ata_irq_on(ap);
+ if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */
+ ata_irq_on(ap);
/* is double-select really necessary? */
if (ap->device[1].class != ATA_DEV_NONE)
@@ -1699,6 +1721,69 @@
DPRINTK("EXIT\n");
}
+static void ata_pr_blacklisted(struct ata_port *ap, struct ata_device *dev)
+{
+ printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, disabling DMA\n",
+ ap->id, dev->devno);
+}
+
+static const char * ata_dma_blacklist [] = {
+ "WDC AC11000H",
+ "WDC AC22100H",
+ "WDC AC32500H",
+ "WDC AC33100H",
+ "WDC AC31600H",
+ "WDC AC32100H",
+ "WDC AC23200L",
+ "Compaq CRD-8241B",
+ "CRD-8400B",
+ "CRD-8480B",
+ "CRD-8482B",
+ "CRD-84",
+ "SanDisk SDP3B",
+ "SanDisk SDP3B-64",
+ "SANYO CD-ROM CRD",
+ "HITACHI CDR-8",
+ "HITACHI CDR-8335",
+ "HITACHI CDR-8435",
+ "Toshiba CD-ROM XM-6202B",
+ "CD-532E-A",
+ "E-IDE CD-ROM CR-840",
+ "CD-ROM Drive/F5A",
+ "WPI CDD-820",
+ "SAMSUNG CD-ROM SC-148C",
+ "SAMSUNG CD-ROM SC",
+ "SanDisk SDP3B-64",
+ "SAMSUNG CD-ROM SN-124",
+ "ATAPI CD-ROM DRIVE 40X MAXIMUM",
+ "_NEC DV5800A",
+};
+
+static int ata_dma_blacklisted(struct ata_port *ap, struct ata_device *dev)
+{
+ unsigned char model_num[40];
+ char *s;
+ unsigned int len;
+ int i;
+
+ ata_dev_id_string(dev->id, model_num, ATA_ID_PROD_OFS,
+ sizeof(model_num));
+ s = &model_num[0];
+ len = strnlen(s, sizeof(model_num));
+
+ /* ATAPI specifies that empty space is blank-filled; remove blanks */
+ while ((len > 0) && (s[len - 1] == ' ')) {
+ len--;
+ s[len] = 0;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i++)
+ if (!strncmp(ata_dma_blacklist[i], s, len))
+ return 1;
+
+ return 0;
+}
+
static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift)
{
struct ata_device *master, *slave;
@@ -1711,17 +1796,37 @@
if (shift == ATA_SHIFT_UDMA) {
mask = ap->udma_mask;
- if (ata_dev_present(master))
+ if (ata_dev_present(master)) {
mask &= (master->id[ATA_ID_UDMA_MODES] & 0xff);
- if (ata_dev_present(slave))
+ if (ata_dma_blacklisted(ap, master)) {
+ mask = 0;
+ ata_pr_blacklisted(ap, master);
+ }
+ }
+ if (ata_dev_present(slave)) {
mask &= (slave->id[ATA_ID_UDMA_MODES] & 0xff);
+ if (ata_dma_blacklisted(ap, slave)) {
+ mask = 0;
+ ata_pr_blacklisted(ap, slave);
+ }
+ }
}
else if (shift == ATA_SHIFT_MWDMA) {
mask = ap->mwdma_mask;
- if (ata_dev_present(master))
+ if (ata_dev_present(master)) {
mask &= (master->id[ATA_ID_MWDMA_MODES] & 0x07);
- if (ata_dev_present(slave))
+ if (ata_dma_blacklisted(ap, master)) {
+ mask = 0;
+ ata_pr_blacklisted(ap, master);
+ }
+ }
+ if (ata_dev_present(slave)) {
mask &= (slave->id[ATA_ID_MWDMA_MODES] & 0x07);
+ if (ata_dma_blacklisted(ap, slave)) {
+ mask = 0;
+ ata_pr_blacklisted(ap, slave);
+ }
+ }
}
else if (shift == ATA_SHIFT_PIO) {
mask = ap->pio_mask;
@@ -1919,7 +2024,24 @@
if (idx)
ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
}
+/**
+ * ata_check_atapi_dma - Check whether ATAPI DMA can be supported
+ * @qc: Metadata associated with taskfile to check
+ *
+ * LOCKING:
+ * RETURNS: 0 when ATAPI DMA can be used
+ * nonzero otherwise
+ */
+int ata_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ int rc = 0; /* Assume ATAPI DMA is OK by default */
+
+ if (ap->ops->check_atapi_dma)
+ rc = ap->ops->check_atapi_dma(qc);
+ return rc;
+}
/**
* ata_qc_prep - Prepare taskfile for submission
* @qc: Metadata associated with taskfile to be prepared
@@ -2369,6 +2491,9 @@
unsigned long timeout = 0;
switch (ap->pio_task_state) {
+ case PIO_ST_IDLE:
+ return;
+
case PIO_ST:
ata_pio_block(ap);
break;
@@ -2385,18 +2510,14 @@
case PIO_ST_TMOUT:
case PIO_ST_ERR:
ata_pio_error(ap);
- break;
+ return;
}
- if ((ap->pio_task_state != PIO_ST_IDLE) &&
- (ap->pio_task_state != PIO_ST_TMOUT) &&
- (ap->pio_task_state != PIO_ST_ERR)) {
- if (timeout)
- queue_delayed_work(ata_wq, &ap->pio_task,
- timeout);
- else
- queue_work(ata_wq, &ap->pio_task);
- }
+ if (timeout)
+ queue_delayed_work(ata_wq, &ap->pio_task,
+ timeout);
+ else
+ queue_work(ata_wq, &ap->pio_task);
}
static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
@@ -2405,7 +2526,6 @@
DECLARE_COMPLETION(wait);
struct ata_queued_cmd *qc;
unsigned long flags;
- int using_pio = dev->flags & ATA_DFLAG_PIO;
int rc;
DPRINTK("ATAPI request sense\n");
@@ -2426,16 +2546,10 @@
qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
qc->tf.command = ATA_CMD_PACKET;
- if (using_pio) {
- qc->tf.protocol = ATA_PROT_ATAPI;
- qc->tf.lbam = (8 * 1024) & 0xff;
- qc->tf.lbah = (8 * 1024) >> 8;
-
- qc->nbytes = SCSI_SENSE_BUFFERSIZE;
- } else {
- qc->tf.protocol = ATA_PROT_ATAPI_DMA;
- qc->tf.feature |= ATAPI_PKT_DMA;
- }
+ qc->tf.protocol = ATA_PROT_ATAPI;
+ qc->tf.lbam = (8 * 1024) & 0xff;
+ qc->tf.lbah = (8 * 1024) >> 8;
+ qc->nbytes = SCSI_SENSE_BUFFERSIZE;
qc->waiting = &wait;
qc->complete_fn = ata_qc_complete_noop;
@@ -2508,10 +2622,10 @@
case ATA_PROT_DMA:
case ATA_PROT_ATAPI_DMA:
- host_stat = ata_bmdma_status(ap);
+ host_stat = ap->ops->bmdma_status(ap);
/* before we do anything else, clear DMA-Start bit */
- ata_bmdma_stop(ap);
+ ap->ops->bmdma_stop(ap);
/* fall through */
@@ -2520,7 +2634,7 @@
drv_stat = ata_chk_status(ap);
/* ack bmdma irq events */
- ata_bmdma_ack_irq(ap);
+ ap->ops->irq_clear(ap);
printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n",
ap->id, qc->tf.command, drv_stat, host_stat);
@@ -2659,6 +2773,24 @@
}
/**
+ * ata_qc_free - free unused ata_queued_cmd
+ * @qc: Command to complete
+ *
+ * Designed to free unused ata_queued_cmd object
+ * in case something prevents using it.
+ *
+ * LOCKING:
+ *
+ */
+void ata_qc_free(struct ata_queued_cmd *qc)
+{
+ assert(qc != NULL); /* ata_qc_from_tag _might_ return NULL */
+ assert(qc->waiting == NULL); /* nothing should be waiting */
+
+ __ata_qc_complete(qc);
+}
+
+/**
* ata_qc_complete - Complete an active ATA command
* @qc: Command to complete
* @drv_stat: ATA status register contents
@@ -2707,7 +2839,7 @@
return 1;
/* fall through */
-
+
default:
return 0;
}
@@ -2949,7 +3081,43 @@
void ata_bmdma_irq_clear(struct ata_port *ap)
{
- ata_bmdma_ack_irq(ap);
+ if (ap->flags & ATA_FLAG_MMIO) {
+ void __iomem *mmio = ((void __iomem *) ap->ioaddr.bmdma_addr) + ATA_DMA_STATUS;
+ writeb(readb(mmio), mmio);
+ } else {
+ unsigned long addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS;
+ outb(inb(addr), addr);
+ }
+
+}
+
+u8 ata_bmdma_status(struct ata_port *ap)
+{
+ u8 host_stat;
+ if (ap->flags & ATA_FLAG_MMIO) {
+ void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
+ host_stat = readb(mmio + ATA_DMA_STATUS);
+ } else
+ host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+ return host_stat;
+}
+
+void ata_bmdma_stop(struct ata_port *ap)
+{
+ if (ap->flags & ATA_FLAG_MMIO) {
+ void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
+
+ /* clear start/stop bit */
+ writeb(readb(mmio + ATA_DMA_CMD) & ~ATA_DMA_START,
+ mmio + ATA_DMA_CMD);
+ } else {
+ /* clear start/stop bit */
+ outb(inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START,
+ ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+ }
+
+ /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
+ ata_altstatus(ap); /* dummy read */
}
/**
@@ -2979,7 +3147,7 @@
case ATA_PROT_ATAPI_DMA:
case ATA_PROT_ATAPI:
/* check status of DMA engine */
- host_stat = ata_bmdma_status(ap);
+ host_stat = ap->ops->bmdma_status(ap);
VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat);
/* if it's not our irq... */
@@ -2987,7 +3155,7 @@
goto idle_irq;
/* before we do anything else, clear DMA-Start bit */
- ata_bmdma_stop(ap);
+ ap->ops->bmdma_stop(ap);
/* fall through */
@@ -3006,7 +3174,7 @@
ap->id, qc->tf.protocol, status);
/* ack bmdma irq events */
- ata_bmdma_ack_irq(ap);
+ ap->ops->irq_clear(ap);
/* complete taskfile transaction */
ata_qc_complete(qc, status);
@@ -3442,32 +3610,28 @@
}
static struct ata_probe_ent *
-ata_probe_ent_alloc(int n, struct device *dev, struct ata_port_info **port)
+ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port)
{
struct ata_probe_ent *probe_ent;
- int i;
- probe_ent = kmalloc(sizeof(*probe_ent) * n, GFP_KERNEL);
+ probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
if (!probe_ent) {
printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
kobject_name(&(dev->kobj)));
return NULL;
}
- memset(probe_ent, 0, sizeof(*probe_ent) * n);
+ memset(probe_ent, 0, sizeof(*probe_ent));
- for (i = 0; i < n; i++) {
- INIT_LIST_HEAD(&probe_ent[i].node);
- probe_ent[i].dev = dev;
-
- probe_ent[i].sht = port[i]->sht;
- probe_ent[i].host_flags = port[i]->host_flags;
- probe_ent[i].pio_mask = port[i]->pio_mask;
- probe_ent[i].mwdma_mask = port[i]->mwdma_mask;
- probe_ent[i].udma_mask = port[i]->udma_mask;
- probe_ent[i].port_ops = port[i]->port_ops;
+ INIT_LIST_HEAD(&probe_ent->node);
+ probe_ent->dev = dev;
- }
+ probe_ent->sht = port->sht;
+ probe_ent->host_flags = port->host_flags;
+ probe_ent->pio_mask = port->pio_mask;
+ probe_ent->mwdma_mask = port->mwdma_mask;
+ probe_ent->udma_mask = port->udma_mask;
+ probe_ent->port_ops = port->port_ops;
return probe_ent;
}
@@ -3477,7 +3641,7 @@
ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port)
{
struct ata_probe_ent *probe_ent =
- ata_probe_ent_alloc(1, pci_dev_to_dev(pdev), port);
+ ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
if (!probe_ent)
return NULL;
@@ -3503,39 +3667,47 @@
return probe_ent;
}
-struct ata_probe_ent *
-ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port)
+static struct ata_probe_ent *
+ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port,
+ struct ata_probe_ent **ppe2)
{
- struct ata_probe_ent *probe_ent =
- ata_probe_ent_alloc(2, pci_dev_to_dev(pdev), port);
+ struct ata_probe_ent *probe_ent, *probe_ent2;
+
+ probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
if (!probe_ent)
return NULL;
+ probe_ent2 = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[1]);
+ if (!probe_ent2) {
+ kfree(probe_ent);
+ return NULL;
+ }
- probe_ent[0].n_ports = 1;
- probe_ent[0].irq = 14;
+ probe_ent->n_ports = 1;
+ probe_ent->irq = 14;
- probe_ent[0].hard_port_no = 0;
- probe_ent[0].legacy_mode = 1;
+ probe_ent->hard_port_no = 0;
+ probe_ent->legacy_mode = 1;
- probe_ent[1].n_ports = 1;
- probe_ent[1].irq = 15;
+ probe_ent2->n_ports = 1;
+ probe_ent2->irq = 15;
- probe_ent[1].hard_port_no = 1;
- probe_ent[1].legacy_mode = 1;
-
- probe_ent[0].port[0].cmd_addr = 0x1f0;
- probe_ent[0].port[0].altstatus_addr =
- probe_ent[0].port[0].ctl_addr = 0x3f6;
- probe_ent[0].port[0].bmdma_addr = pci_resource_start(pdev, 4);
-
- probe_ent[1].port[0].cmd_addr = 0x170;
- probe_ent[1].port[0].altstatus_addr =
- probe_ent[1].port[0].ctl_addr = 0x376;
- probe_ent[1].port[0].bmdma_addr = pci_resource_start(pdev, 4)+8;
+ probe_ent2->hard_port_no = 1;
+ probe_ent2->legacy_mode = 1;
- ata_std_ports(&probe_ent[0].port[0]);
- ata_std_ports(&probe_ent[1].port[0]);
+ probe_ent->port[0].cmd_addr = 0x1f0;
+ probe_ent->port[0].altstatus_addr =
+ probe_ent->port[0].ctl_addr = 0x3f6;
+ probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4);
+
+ probe_ent2->port[0].cmd_addr = 0x170;
+ probe_ent2->port[0].altstatus_addr =
+ probe_ent2->port[0].ctl_addr = 0x376;
+ probe_ent2->port[0].bmdma_addr = pci_resource_start(pdev, 4)+8;
+
+ ata_std_ports(&probe_ent->port[0]);
+ ata_std_ports(&probe_ent2->port[0]);
+ *ppe2 = probe_ent2;
return probe_ent;
}
@@ -3559,6 +3731,7 @@
struct ata_port_info *port[2];
u8 tmp8, mask;
unsigned int legacy_mode = 0;
+ int disable_dev_on_err = 1;
int rc;
DPRINTK("ENTER\n");
@@ -3569,7 +3742,8 @@
else
port[1] = port[0];
- if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0) {
+ if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0
+ && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
/* TODO: support transitioning to native mode? */
pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
mask = (1 << 2) | (1 << 0);
@@ -3588,8 +3762,10 @@
return rc;
rc = pci_request_regions(pdev, DRV_NAME);
- if (rc)
+ if (rc) {
+ disable_dev_on_err = 0;
goto err_out;
+ }
if (legacy_mode) {
if (!request_region(0x1f0, 8, "libata")) {
@@ -3599,8 +3775,10 @@
conflict = ____request_resource(&ioport_resource, &res);
if (!strcmp(conflict->name, "libata"))
legacy_mode |= (1 << 0);
- else
+ else {
+ disable_dev_on_err = 0;
printk(KERN_WARNING "ata: 0x1f0 IDE port busy\n");
+ }
} else
legacy_mode |= (1 << 0);
@@ -3611,8 +3789,10 @@
conflict = ____request_resource(&ioport_resource, &res);
if (!strcmp(conflict->name, "libata"))
legacy_mode |= (1 << 1);
- else
+ else {
+ disable_dev_on_err = 0;
printk(KERN_WARNING "ata: 0x170 IDE port busy\n");
+ }
} else
legacy_mode |= (1 << 1);
}
@@ -3631,9 +3811,7 @@
goto err_out_regions;
if (legacy_mode) {
- probe_ent = ata_pci_init_legacy_mode(pdev, port);
- if (probe_ent)
- probe_ent2 = &probe_ent[1];
+ probe_ent = ata_pci_init_legacy_mode(pdev, port, &probe_ent2);
} else
probe_ent = ata_pci_init_native_mode(pdev, port);
if (!probe_ent) {
@@ -3649,10 +3827,11 @@
ata_device_add(probe_ent);
if (legacy_mode & (1 << 1))
ata_device_add(probe_ent2);
- } else {
+ } else
ata_device_add(probe_ent);
- }
+
kfree(probe_ent);
+ kfree(probe_ent2);
return 0;
@@ -3663,7 +3842,8 @@
release_region(0x170, 8);
pci_release_regions(pdev);
err_out:
- pci_disable_device(pdev);
+ if (disable_dev_on_err)
+ pci_disable_device(pdev);
return rc;
}
@@ -3813,6 +3993,8 @@
EXPORT_SYMBOL_GPL(ata_tf_to_fis);
EXPORT_SYMBOL_GPL(ata_tf_from_fis);
EXPORT_SYMBOL_GPL(ata_check_status);
+EXPORT_SYMBOL_GPL(ata_altstatus);
+EXPORT_SYMBOL_GPL(ata_chk_err);
EXPORT_SYMBOL_GPL(ata_exec_command);
EXPORT_SYMBOL_GPL(ata_port_start);
EXPORT_SYMBOL_GPL(ata_port_stop);
@@ -3821,6 +4003,8 @@
EXPORT_SYMBOL_GPL(ata_bmdma_setup);
EXPORT_SYMBOL_GPL(ata_bmdma_start);
EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
+EXPORT_SYMBOL_GPL(ata_bmdma_status);
+EXPORT_SYMBOL_GPL(ata_bmdma_stop);
EXPORT_SYMBOL_GPL(ata_port_probe);
EXPORT_SYMBOL_GPL(sata_phy_reset);
EXPORT_SYMBOL_GPL(__sata_phy_reset);
@@ -3838,7 +4022,6 @@
#ifdef CONFIG_PCI
EXPORT_SYMBOL_GPL(pci_test_config_bits);
-EXPORT_SYMBOL_GPL(ata_pci_init_legacy_mode);
EXPORT_SYMBOL_GPL(ata_pci_init_native_mode);
EXPORT_SYMBOL_GPL(ata_pci_init_one);
EXPORT_SYMBOL_GPL(ata_pci_remove_one);
diff -Nru a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
--- a/drivers/scsi/libata-scsi.c 2005-03-01 23:38:56 -08:00
+++ b/drivers/scsi/libata-scsi.c 2005-03-01 23:38:56 -08:00
@@ -202,7 +202,7 @@
{0x40, MEDIUM_ERROR, 0x11, 0x04}, // Uncorrectable ECC error Unrecovered read error
/* BBD - block marked bad */
{0x80, MEDIUM_ERROR, 0x11, 0x04}, // Block marked bad Medium error, unrecovered read error
- {0xFF, 0xFF, 0xFF, 0xFF}, // END mark
+ {0xFF, 0xFF, 0xFF, 0xFF}, // END mark
};
static unsigned char stat_table[][4] = {
/* Must be first because BUSY means no other bits valid */
@@ -210,22 +210,22 @@
{0x20, HARDWARE_ERROR, 0x00, 0x00}, // Device fault
{0x08, ABORTED_COMMAND, 0x47, 0x00}, // Timed out in xfer, fake parity for now
{0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered
- {0xFF, 0xFF, 0xFF, 0xFF}, // END mark
+ {0xFF, 0xFF, 0xFF, 0xFF}, // END mark
};
int i = 0;
cmd->result = SAM_STAT_CHECK_CONDITION;
-
+
/*
* Is this an error we can process/parse
*/
-
+
if(drv_stat & ATA_ERR)
/* Read the err bits */
err = ata_chk_err(qc->ap);
/* Display the ATA level error info */
-
+
printk(KERN_WARNING "ata%u: status=0x%02x { ", qc->ap->id, drv_stat);
if(drv_stat & 0x80)
{
@@ -242,7 +242,7 @@
if(drv_stat & 0x01) printk("Error ");
}
printk("}\n");
-
+
if(err)
{
printk(KERN_WARNING "ata%u: error=0x%02x { ", qc->ap->id, err);
@@ -259,11 +259,11 @@
if(err & 0x02) printk("TrackZeroNotFound ");
if(err & 0x01) printk("AddrMarkNotFound ");
printk("}\n");
-
+
/* Should we dump sector info here too ?? */
}
-
-
+
+
/* Look for err */
while(sense_table[i][0] != 0xFF)
{
@@ -282,7 +282,8 @@
/* No immediate match */
if(err)
printk(KERN_DEBUG "ata%u: no sense translation for 0x%02x\n", qc->ap->id, err);
-
+
+ i = 0;
/* Fall back to interpreting status bits */
while(stat_table[i][0] != 0xFF)
{
@@ -300,7 +301,7 @@
/* No error ?? */
printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat);
/* additional-sense-code[-qualifier] */
-
+
sb[0] = 0x70;
sb[2] = MEDIUM_ERROR;
sb[7] = 0x0A;
@@ -487,19 +488,24 @@
}
if (lba48) {
+ tf->command = ATA_CMD_VERIFY_EXT;
+
tf->hob_nsect = (n_sect >> 8) & 0xff;
tf->hob_lbah = (sect >> 40) & 0xff;
tf->hob_lbam = (sect >> 32) & 0xff;
tf->hob_lbal = (sect >> 24) & 0xff;
- } else
+ } else {
+ tf->command = ATA_CMD_VERIFY;
+
tf->device |= (sect >> 24) & 0xf;
+ }
tf->nsect = n_sect & 0xff;
- tf->hob_lbah = (sect >> 16) & 0xff;
- tf->hob_lbam = (sect >> 8) & 0xff;
- tf->hob_lbal = sect & 0xff;
+ tf->lbah = (sect >> 16) & 0xff;
+ tf->lbam = (sect >> 8) & 0xff;
+ tf->lbal = sect & 0xff;
return 0;
}
@@ -599,7 +605,7 @@
return 1;
/* stores LBA27:24 in lower 4 bits of device reg */
- tf->device |= scsicmd[2];
+ tf->device |= scsicmd[6];
qc->nsect = scsicmd[13];
}
@@ -695,6 +701,7 @@
return;
err_out:
+ ata_qc_free(qc);
ata_bad_cdb(cmd, done);
DPRINTK("EXIT - badcmd\n");
}
@@ -1293,6 +1300,11 @@
struct ata_device *dev = qc->dev;
int using_pio = (dev->flags & ATA_DFLAG_PIO);
int nodata = (cmd->sc_data_direction == SCSI_DATA_NONE);
+
+ if (!using_pio)
+ /* Check whether ATAPI DMA is safe */
+ if (ata_check_atapi_dma(qc))
+ using_pio = 1;
memcpy(&qc->cdb, scsicmd, qc->ap->cdb_len);
diff -Nru a/drivers/scsi/libata.h b/drivers/scsi/libata.h
--- a/drivers/scsi/libata.h 2005-03-01 23:38:53 -08:00
+++ b/drivers/scsi/libata.h 2005-03-01 23:38:53 -08:00
@@ -37,7 +37,9 @@
/* libata-core.c */
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
struct ata_device *dev);
+extern void ata_qc_free(struct ata_queued_cmd *qc);
extern int ata_qc_issue(struct ata_queued_cmd *qc);
+extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
extern void ata_dev_select(struct ata_port *ap, unsigned int device,
unsigned int wait, unsigned int can_sleep);
extern void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf);
diff -Nru a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
--- a/drivers/scsi/sata_nv.c 2005-03-01 23:38:53 -08:00
+++ b/drivers/scsi/sata_nv.c 2005-03-01 23:38:53 -08:00
@@ -20,6 +20,10 @@
* If you do not delete the provisions above, a recipient may use your
* version of this file under either the OSL or the GPL.
*
+ * 0.06
+ * - Added generic SATA support by using a pci_device_id that filters on
+ * the IDE storage class code.
+ *
* 0.03
* - Fixed a bug where the hotplug handlers for non-CK804/MCP04 were using
* mmio_base, which is only set for the CK804/MCP04 case.
@@ -44,7 +48,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_nv"
-#define DRV_VERSION "0.5"
+#define DRV_VERSION "0.6"
#define NV_PORTS 2
#define NV_PIO_MASK 0x1f
@@ -108,6 +112,7 @@
enum nv_host_type
{
+ GENERIC,
NFORCE2,
NFORCE3,
CK804
@@ -128,6 +133,9 @@
PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
+ { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC },
{ 0, } /* terminate list */
};
@@ -136,7 +144,6 @@
struct nv_host_desc
{
enum nv_host_type host_type;
- unsigned long host_flags;
void (*enable_hotplug)(struct ata_probe_ent *probe_ent);
void (*disable_hotplug)(struct ata_host_set *host_set);
void (*check_hotplug)(struct ata_host_set *host_set);
@@ -144,21 +151,24 @@
};
static struct nv_host_desc nv_device_tbl[] = {
{
+ .host_type = GENERIC,
+ .enable_hotplug = NULL,
+ .disable_hotplug= NULL,
+ .check_hotplug = NULL,
+ },
+ {
.host_type = NFORCE2,
- .host_flags = 0x00000000,
.enable_hotplug = nv_enable_hotplug,
.disable_hotplug= nv_disable_hotplug,
.check_hotplug = nv_check_hotplug,
},
{
.host_type = NFORCE3,
- .host_flags = 0x00000000,
.enable_hotplug = nv_enable_hotplug,
.disable_hotplug= nv_disable_hotplug,
.check_hotplug = nv_check_hotplug,
},
{ .host_type = CK804,
- .host_flags = NV_HOST_FLAGS_SCR_MMIO,
.enable_hotplug = nv_enable_hotplug_ck804,
.disable_hotplug= nv_disable_hotplug_ck804,
.check_hotplug = nv_check_hotplug_ck804,
@@ -168,6 +178,7 @@
struct nv_host
{
struct nv_host_desc *host_desc;
+ unsigned long host_flags;
};
static struct pci_driver nv_pci_driver = {
@@ -206,6 +217,8 @@
.phy_reset = sata_phy_reset,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.eng_timeout = ata_eng_timeout,
@@ -284,8 +297,8 @@
if (sc_reg > SCR_CONTROL)
return 0xffffffffU;
- if (host->host_desc->host_flags & NV_HOST_FLAGS_SCR_MMIO)
- return readl(ap->ioaddr.scr_addr + (sc_reg * 4));
+ if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
+ return readl((void*)ap->ioaddr.scr_addr + (sc_reg * 4));
else
return inl(ap->ioaddr.scr_addr + (sc_reg * 4));
}
@@ -298,8 +311,8 @@
if (sc_reg > SCR_CONTROL)
return;
- if (host->host_desc->host_flags & NV_HOST_FLAGS_SCR_MMIO)
- writel(val, ap->ioaddr.scr_addr + (sc_reg * 4));
+ if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
+ writel(val, (void*)ap->ioaddr.scr_addr + (sc_reg * 4));
else
outl(val, ap->ioaddr.scr_addr + (sc_reg * 4));
}
@@ -321,7 +334,16 @@
struct nv_host *host;
struct ata_port_info *ppi;
struct ata_probe_ent *probe_ent;
+ int pci_dev_busy = 0;
int rc;
+ u32 bar;
+
+ // Make sure this is a SATA controller by counting the number of bars
+ // (NVIDIA SATA controllers will always have six bars). Otherwise,
+ // it's an IDE controller and we ignore it.
+ for (bar=0; bar<6; bar++)
+ if (pci_resource_start(pdev, bar) == 0)
+ return -ENODEV;
if (!printed_version++)
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
@@ -331,8 +353,10 @@
goto err_out;
rc = pci_request_regions(pdev, DRV_NAME);
- if (rc)
+ if (rc) {
+ pci_dev_busy = 1;
goto err_out_disable;
+ }
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
@@ -352,11 +376,15 @@
if (!host)
goto err_out_free_ent;
+ memset(host, 0, sizeof(struct nv_host));
host->host_desc = &nv_device_tbl[ent->driver_data];
probe_ent->private_data = host;
- if (host->host_desc->host_flags & NV_HOST_FLAGS_SCR_MMIO) {
+ if (pci_resource_flags(pdev, 5) & IORESOURCE_MEM)
+ host->host_flags |= NV_HOST_FLAGS_SCR_MMIO;
+
+ if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) {
unsigned long base;
probe_ent->mmio_base = ioremap(pci_resource_start(pdev, 5),
@@ -395,7 +423,7 @@
return 0;
err_out_iounmap:
- if (host->host_desc->host_flags & NV_HOST_FLAGS_SCR_MMIO)
+ if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
iounmap(probe_ent->mmio_base);
err_out_free_host:
kfree(host);
@@ -404,7 +432,8 @@
err_out_regions:
pci_release_regions(pdev);
err_out_disable:
- pci_disable_device(pdev);
+ if (!pci_dev_busy)
+ pci_disable_device(pdev);
err_out:
return rc;
}
diff -Nru a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
--- a/drivers/scsi/sata_promise.c 2005-03-01 23:39:08 -08:00
+++ b/drivers/scsi/sata_promise.c 2005-03-01 23:39:08 -08:00
@@ -156,10 +156,18 @@
board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3376, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
+ { PCI_VENDOR_ID_PROMISE, 0x3574, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_2037x },
+ { PCI_VENDOR_ID_PROMISE, 0x3d75, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_2037x },
+
{ PCI_VENDOR_ID_PROMISE, 0x3318, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20319 },
{ PCI_VENDOR_ID_PROMISE, 0x3319, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20319 },
+ { PCI_VENDOR_ID_PROMISE, 0x3d18, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_20319 },
+
{ } /* terminate list */
};
@@ -406,9 +414,11 @@
return IRQ_NONE;
}
- spin_lock(&host_set->lock);
+ spin_lock(&host_set->lock);
- for (i = 0; i < host_set->n_ports; i++) {
+ writel(mask, mmio_base + PDC_INT_SEQMASK);
+
+ for (i = 0; i < host_set->n_ports; i++) {
VPRINTK("port %u\n", i);
ap = host_set->ports[i];
tmp = mask & (1 << (i + 1));
@@ -546,6 +556,7 @@
unsigned long base;
void *mmio_base;
unsigned int board_idx = (unsigned int) ent->driver_data;
+ int pci_dev_busy = 0;
int rc;
if (!printed_version++)
@@ -560,8 +571,10 @@
return rc;
rc = pci_request_regions(pdev, DRV_NAME);
- if (rc)
+ if (rc) {
+ pci_dev_busy = 1;
goto err_out;
+ }
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
@@ -640,7 +653,8 @@
err_out_regions:
pci_release_regions(pdev);
err_out:
- pci_disable_device(pdev);
+ if (!pci_dev_busy)
+ pci_disable_device(pdev);
return rc;
}
diff -Nru a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
--- /dev/null Wed Dec 31 16:00:00 196900
+++ b/drivers/scsi/sata_qstor.c 2005-03-01 23:39:27 -08:00
@@ -0,0 +1,700 @@
+/*
+ * sata_qstor.c - Pacific Digital Corporation QStor SATA
+ *
+ * Maintained by: Mark Lord <mlord@xxxxxxxxx>
+ *
+ * Copyright 2005 Pacific Digital Corporation.
+ * (OSL/GPL code release authorized by Jalil Fadavi).
+ *
+ * The contents of this file are subject to the Open
+ * Software License version 1.1 that can be found at
+ * http://www.opensource.org/licenses/osl-1.1.txt and is included herein
+ * by reference.
+ *
+ * Alternatively, the contents of this file may be used under the terms
+ * of the GNU General Public License version 2 (the "GPL") as distributed
+ * in the kernel source COPYING file, in which case the provisions of
+ * the GPL are applicable instead of the above. If you wish to allow
+ * the use of your version of this file only under the terms of the
+ * GPL and not to allow others to use your version of this file under
+ * the OSL, indicate your decision by deleting the provisions above and
+ * replace them with the notice and other provisions required by the GPL.
+ * If you do not delete the provisions above, a recipient may use your
+ * version of this file under either the OSL or the GPL.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include <asm/io.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "sata_qstor"
+#define DRV_VERSION "0.03"
+
+enum {
+ QS_PORTS = 4,
+ QS_MAX_PRD = LIBATA_MAX_PRD,
+ QS_CPB_ORDER = 6,
+ QS_CPB_BYTES = (1 << QS_CPB_ORDER),
+ QS_PRD_BYTES = QS_MAX_PRD * 16,
+ QS_PKT_BYTES = QS_CPB_BYTES + QS_PRD_BYTES,
+
+ QS_DMA_BOUNDARY = ~0UL,
+
+ /* global register offsets */
+ QS_HCF_CNFG3 = 0x0003, /* host configuration offset */
+ QS_HID_HPHY = 0x0004, /* host physical interface info */
+ QS_HCT_CTRL = 0x00e4, /* global interrupt mask offset */
+ QS_HST_SFF = 0x0100, /* host status fifo offset */
+ QS_HVS_SERD3 = 0x0393, /* PHY enable offset */
+
+ /* global control bits */
+ QS_HPHY_64BIT = (1 << 1), /* 64-bit bus detected */
+ QS_CNFG3_GSRST = 0x01, /* global chip reset */
+ QS_SERD3_PHY_ENA = 0xf0, /* PHY detection ENAble*/
+
+ /* per-channel register offsets */
+ QS_CCF_CPBA = 0x0710, /* chan CPB base address */
+ QS_CCF_CSEP = 0x0718, /* chan CPB separation factor */
+ QS_CFC_HUFT = 0x0800, /* host upstream fifo threshold */
+ QS_CFC_HDFT = 0x0804, /* host downstream fifo threshold */
+ QS_CFC_DUFT = 0x0808, /* dev upstream fifo threshold */
+ QS_CFC_DDFT = 0x080c, /* dev downstream fifo threshold */
+ QS_CCT_CTR0 = 0x0900, /* chan control-0 offset */
+ QS_CCT_CTR1 = 0x0901, /* chan control-1 offset */
+ QS_CCT_CFF = 0x0a00, /* chan command fifo offset */
+
+ /* channel control bits */
+ QS_CTR0_REG = (1 << 1), /* register mode (vs. pkt mode) */
+ QS_CTR0_CLER = (1 << 2), /* clear channel errors */
+ QS_CTR1_RDEV = (1 << 1), /* sata phy/comms reset */
+ QS_CTR1_RCHN = (1 << 4), /* reset channel logic */
+ QS_CCF_RUN_PKT = 0x107, /* RUN a new dma PKT */
+
+ /* pkt sub-field headers */
+ QS_HCB_HDR = 0x01, /* Host Control Block header */
+ QS_DCB_HDR = 0x02, /* Device Control Block header */
+
+ /* pkt HCB flag bits */
+ QS_HF_DIRO = (1 << 0), /* data DIRection Out */
+ QS_HF_DAT = (1 << 3), /* DATa pkt */
+ QS_HF_IEN = (1 << 4), /* Interrupt ENable */
+ QS_HF_VLD = (1 << 5), /* VaLiD pkt */
+
+ /* pkt DCB flag bits */
+ QS_DF_PORD = (1 << 2), /* Pio OR Dma */
+ QS_DF_ELBA = (1 << 3), /* Extended LBA (lba48) */
+
+ /* PCI device IDs */
+ board_2068_idx = 0, /* QStor 4-port SATA/RAID */
+};
+
+typedef enum { qs_state_idle, qs_state_pkt, qs_state_mmio } qs_state_t;
+
+struct qs_port_priv {
+ u8 *pkt;
+ dma_addr_t pkt_dma;
+ qs_state_t state;
+};
+
+static u32 qs_scr_read (struct ata_port *ap, unsigned int sc_reg);
+static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
+static int qs_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+static irqreturn_t qs_intr (int irq, void *dev_instance, struct pt_regs *regs);
+static int qs_port_start(struct ata_port *ap);
+static void qs_host_stop(struct ata_host_set *host_set);
+static void qs_port_stop(struct ata_port *ap);
+static void qs_phy_reset(struct ata_port *ap);
+static void qs_qc_prep(struct ata_queued_cmd *qc);
+static int qs_qc_issue(struct ata_queued_cmd *qc);
+static int qs_check_atapi_dma(struct ata_queued_cmd *qc);
+static void qs_bmdma_stop(struct ata_port *ap);
+static u8 qs_bmdma_status(struct ata_port *ap);
+static void qs_irq_clear(struct ata_port *ap);
+
+static Scsi_Host_Template qs_ata_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .eh_strategy_handler = ata_scsi_error,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = QS_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ //FIXME .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .use_clustering = ENABLE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = QS_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+};
+
+static struct ata_port_operations qs_ata_ops = {
+ .port_disable = ata_port_disable,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .check_atapi_dma = qs_check_atapi_dma,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+ .phy_reset = qs_phy_reset,
+ .qc_prep = qs_qc_prep,
+ .qc_issue = qs_qc_issue,
+ .eng_timeout = ata_eng_timeout,
+ .irq_handler = qs_intr,
+ .irq_clear = qs_irq_clear,
+ .scr_read = qs_scr_read,
+ .scr_write = qs_scr_write,
+ .port_start = qs_port_start,
+ .port_stop = qs_port_stop,
+ .host_stop = qs_host_stop,
+ .bmdma_stop = qs_bmdma_stop,
+ .bmdma_status = qs_bmdma_status,
+};
+
+static struct ata_port_info qs_port_info[] = {
+ /* board_2068_idx */
+ {
+ .sht = &qs_ata_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SATA_RESET |
+ //FIXME ATA_FLAG_SRST |
+ ATA_FLAG_MMIO,
+ .pio_mask = 0x10, /* pio4 */
+ .udma_mask = 0x7f, /* udma0-6 */
+ .port_ops = &qs_ata_ops,
+ },
+};
+
+static struct pci_device_id qs_ata_pci_tbl[] = {
+ { PCI_VENDOR_ID_PDC, 0x2068, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ board_2068_idx },
+
+ { } /* terminate list */
+};
+
+static struct pci_driver qs_ata_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = qs_ata_pci_tbl,
+ .probe = qs_ata_init_one,
+ .remove = ata_pci_remove_one,
+};
+
+static int qs_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ return 1; /* ATAPI DMA not supported */
+}
+
+static void qs_bmdma_stop(struct ata_port *ap)
+{
+ /* nothing */
+}
+
+static u8 qs_bmdma_status(struct ata_port *ap)
+{
+ return 0;
+}
+
+static void qs_irq_clear(struct ata_port *ap)
+{
+ /* nothing */
+}
+
+static void qs_enter_reg_mode(struct ata_port *ap)
+{
+ u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000);
+
+ writeb(QS_CTR0_REG, chan + QS_CCT_CTR0);
+ readb(chan + QS_CCT_CTR0); /* flush */
+}
+
+static void qs_phy_reset(struct ata_port *ap)
+{
+ u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000);
+ struct qs_port_priv *pp = ap->private_data;
+
+ pp->state = qs_state_idle;
+ writeb(QS_CTR1_RCHN, chan + QS_CCT_CTR1);
+ qs_enter_reg_mode(ap);
+ sata_phy_reset(ap);
+}
+
+static u32 qs_scr_read (struct ata_port *ap, unsigned int sc_reg)
+{
+ if (sc_reg > SCR_CONTROL)
+ return ~0U;
+ return readl((void __iomem *)(ap->ioaddr.scr_addr + (sc_reg * 8)));
+}
+
+static void qs_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
+{
+ if (sc_reg > SCR_CONTROL)
+ return;
+ writel(val, (void __iomem *)(ap->ioaddr.scr_addr + (sc_reg * 8)));
+}
+
+static void qs_fill_sg(struct ata_queued_cmd *qc)
+{
+ struct scatterlist *sg = qc->sg;
+ struct ata_port *ap = qc->ap;
+ struct qs_port_priv *pp = ap->private_data;
+ unsigned int nelem;
+ u8 *prd = pp->pkt + QS_CPB_BYTES;
+
+ assert(sg != NULL);
+ assert(qc->n_elem > 0);
+
+ for (nelem = 0; nelem < qc->n_elem; nelem++,sg++) {
+ u64 addr;
+ u32 len;
+
+ addr = sg_dma_address(sg);
+ *(u64 *)prd = cpu_to_le64(addr);
+ prd += sizeof(u64);
+
+ len = sg_dma_len(sg);
+ *(u32 *)prd = cpu_to_le32(len);
+ prd += sizeof(u64);
+
+ VPRINTK("PRD[%u] = (0x%llX, 0x%X)\n", nelem,
+ (unsigned long long)addr, len);
+ }
+}
+
+static void qs_qc_prep(struct ata_queued_cmd *qc)
+{
+ struct qs_port_priv *pp = qc->ap->private_data;
+ u8 dflags = QS_DF_PORD, *buf = pp->pkt;
+ u8 hflags = QS_HF_DAT | QS_HF_IEN | QS_HF_VLD;
+ u64 addr;
+
+ VPRINTK("ENTER\n");
+
+ qs_enter_reg_mode(qc->ap);
+ if (qc->tf.protocol != ATA_PROT_DMA) {
+ ata_qc_prep(qc);
+ return;
+ }
+
+ qs_fill_sg(qc);
+
+ if ((qc->tf.flags & ATA_TFLAG_WRITE))
+ hflags |= QS_HF_DIRO;
+ if ((qc->tf.flags & ATA_TFLAG_LBA48))
+ dflags |= QS_DF_ELBA;
+
+ /* host control block (HCB) */
+ buf[ 0] = QS_HCB_HDR;
+ buf[ 1] = hflags;
+ *(u32 *)(&buf[ 4]) = cpu_to_le32(qc->nsect * ATA_SECT_SIZE);
+ *(u32 *)(&buf[ 8]) = cpu_to_le32(qc->n_elem);
+ addr = ((u64)pp->pkt_dma) + QS_CPB_BYTES;
+ *(u64 *)(&buf[16]) = cpu_to_le64(addr);
+
+ /* device control block (DCB) */
+ buf[24] = QS_DCB_HDR;
+ buf[28] = dflags;
+
+ /* frame information structure (FIS) */
+ ata_tf_to_fis(&qc->tf, &buf[32], 0);
+}
+
+static inline void qs_packet_start(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ u8 __iomem *chan = ap->host_set->mmio_base + (ap->port_no * 0x4000);
+
+ VPRINTK("ENTER, ap %p\n", ap);
+
+ writeb(QS_CTR0_CLER, chan + QS_CCT_CTR0);
+ wmb(); /* flush PRDs and pkt to memory */
+ writel(QS_CCF_RUN_PKT, chan + QS_CCT_CFF);
+ readl(chan + QS_CCT_CFF); /* flush */
+}
+
+static int qs_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct qs_port_priv *pp = qc->ap->private_data;
+
+ switch (qc->tf.protocol) {
+ case ATA_PROT_DMA:
+
+ pp->state = qs_state_pkt;
+ qs_packet_start(qc);
+ return 0;
+
+ case ATA_PROT_ATAPI_DMA:
+ BUG();
+ break;
+
+ default:
+ break;
+ }
+
+ pp->state = qs_state_mmio;
+ return ata_qc_issue_prot(qc);
+}
+
+static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set)
+{
+ unsigned int handled = 0;
+ u8 sFFE;
+ u8 __iomem *mmio_base = host_set->mmio_base;
+
+ do {
+ u32 sff0 = readl(mmio_base + QS_HST_SFF);
+ u32 sff1 = readl(mmio_base + QS_HST_SFF + 4);
+ u8 sEVLD = (sff1 >> 30) & 0x01; /* valid flag */
+ sFFE = sff1 >> 31; /* empty flag */
+
+ if (sEVLD) {
+ u8 sDST = sff0 >> 16; /* dev status */
+ u8 sHST = sff1 & 0x3f; /* host status */
+ unsigned int port_no = (sff1 >> 8) & 0x03;
+ struct ata_port *ap = host_set->ports[port_no];
+
+ DPRINTK("SFF=%08x%08x: sCHAN=%u sHST=%d sDST=%02x\n",
+ sff1, sff0, port_no, sHST, sDST);
+ handled = 1;
+ if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
+ struct ata_queued_cmd *qc;
+ struct qs_port_priv *pp = ap->private_data;
+ if (!pp || pp->state != qs_state_pkt)
+ continue;
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
+ switch (sHST) {
+ case 0: /* sucessful CPB */
+ case 3: /* device error */
+ pp->state = qs_state_idle;
+ qs_enter_reg_mode(qc->ap);
+ ata_qc_complete(qc, sDST);
+ break;
+ default:
+ break;
+ }
+ }
+ }
+ }
+ } while (!sFFE);
+ return handled;
+}
+
+static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set)
+{
+ unsigned int handled = 0, port_no;
+
+ for (port_no = 0; port_no < host_set->n_ports; ++port_no) {
+ struct ata_port *ap;
+ ap = host_set->ports[port_no];
+ if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
+ struct ata_queued_cmd *qc;
+ struct qs_port_priv *pp = ap->private_data;
+ if (!pp || pp->state != qs_state_mmio)
+ continue;
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
+
+ /* check main status, clearing INTRQ */
+ u8 status = ata_chk_status(ap);
+ if ((status & ATA_BUSY))
+ continue;
+ DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
+ ap->id, qc->tf.protocol, status);
+
+ /* complete taskfile transaction */
+ pp->state = qs_state_idle;
+ ata_qc_complete(qc, status);
+ handled = 1;
+ }
+ }
+ }
+ return handled;
+}
+
+static irqreturn_t qs_intr(int irq, void *dev_instance, struct pt_regs *regs)
+{
+ struct ata_host_set *host_set = dev_instance;
+ unsigned int handled = 0;
+
+ VPRINTK("ENTER\n");
+
+ spin_lock(&host_set->lock);
+ handled = qs_intr_pkt(host_set) | qs_intr_mmio(host_set);
+ spin_unlock(&host_set->lock);
+
+ VPRINTK("EXIT\n");
+
+ return IRQ_RETVAL(handled);
+}
+
+static void qs_ata_setup_port(struct ata_ioports *port, unsigned long base)
+{
+ port->cmd_addr =
+ port->data_addr = base + 0x400;
+ port->error_addr =
+ port->feature_addr = base + 0x408; /* hob_feature = 0x409 */
+ port->nsect_addr = base + 0x410; /* hob_nsect = 0x411 */
+ port->lbal_addr = base + 0x418; /* hob_lbal = 0x419 */
+ port->lbam_addr = base + 0x420; /* hob_lbam = 0x421 */
+ port->lbah_addr = base + 0x428; /* hob_lbah = 0x429 */
+ port->device_addr = base + 0x430;
+ port->status_addr =
+ port->command_addr = base + 0x438;
+ port->altstatus_addr =
+ port->ctl_addr = base + 0x440;
+ port->scr_addr = base + 0xc00;
+}
+
+static int qs_port_start(struct ata_port *ap)
+{
+ struct device *dev = ap->host_set->dev;
+ struct qs_port_priv *pp;
+ void __iomem *mmio_base = ap->host_set->mmio_base;
+ void __iomem *chan = mmio_base + (ap->port_no * 0x4000);
+ u64 addr;
+ int rc;
+
+ rc = ata_port_start(ap);
+ if (rc)
+ return rc;
+ qs_enter_reg_mode(ap);
+ pp = kcalloc(1, sizeof(*pp), GFP_KERNEL);
+ if (!pp) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ pp->pkt = dma_alloc_coherent(dev, QS_PKT_BYTES, &pp->pkt_dma,
+ GFP_KERNEL);
+ if (!pp->pkt) {
+ rc = -ENOMEM;
+ goto err_out_kfree;
+ }
+ memset(pp->pkt, 0, QS_PKT_BYTES);
+ ap->private_data = pp;
+
+ addr = (u64)pp->pkt_dma;
+ writel((u32) addr, chan + QS_CCF_CPBA);
+ writel((u32)(addr >> 32), chan + QS_CCF_CPBA + 4);
+ return 0;
+
+err_out_kfree:
+ kfree(pp);
+err_out:
+ ata_port_stop(ap);
+ return rc;
+}
+
+static void qs_port_stop(struct ata_port *ap)
+{
+ struct device *dev = ap->host_set->dev;
+ struct qs_port_priv *pp = ap->private_data;
+
+ if (pp != NULL) {
+ ap->private_data = NULL;
+ if (pp->pkt != NULL)
+ dma_free_coherent(dev, QS_PKT_BYTES, pp->pkt,
+ pp->pkt_dma);
+ kfree(pp);
+ }
+ ata_port_stop(ap);
+}
+
+static void qs_host_stop(struct ata_host_set *host_set)
+{
+ void __iomem *mmio_base = host_set->mmio_base;
+
+ writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */
+ writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
+}
+
+static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
+{
+ void __iomem *mmio_base = pe->mmio_base;
+ unsigned int port_no;
+
+ writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */
+ writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */
+
+ /* reset each channel in turn */
+ for (port_no = 0; port_no < pe->n_ports; ++port_no) {
+ u8 __iomem *chan = mmio_base + (port_no * 0x4000);
+ writeb(QS_CTR1_RDEV|QS_CTR1_RCHN, chan + QS_CCT_CTR1);
+ writeb(QS_CTR0_REG, chan + QS_CCT_CTR0);
+ readb(chan + QS_CCT_CTR0); /* flush */
+ }
+ writeb(QS_SERD3_PHY_ENA, mmio_base + QS_HVS_SERD3); /* enable phy */
+
+ for (port_no = 0; port_no < pe->n_ports; ++port_no) {
+ u8 __iomem *chan = mmio_base + (port_no * 0x4000);
+ /* set FIFO depths to same settings as Windows driver */
+ writew(32, chan + QS_CFC_HUFT);
+ writew(32, chan + QS_CFC_HDFT);
+ writew(10, chan + QS_CFC_DUFT);
+ writew( 8, chan + QS_CFC_DDFT);
+ /* set CPB size in bytes, as a power of two */
+ writeb(QS_CPB_ORDER, chan + QS_CCF_CSEP);
+ }
+ writeb(1, mmio_base + QS_HCT_CTRL); /* enable host interrupts */
+}
+
+/*
+ * The QStor understands 64-bit buses, and uses 64-bit fields
+ * for DMA pointers regardless of bus width. We just have to
+ * make sure our DMA masks are set appropriately for whatever
+ * bridge lies between us and the QStor, and then the DMA mapping
+ * code will ensure we only ever "see" appropriate buffer addresses.
+ * If we're 32-bit limited somewhere, then our 64-bit fields will
+ * just end up with zeros in the upper 32-bits, without any special
+ * logic required outside of this routine (below).
+ */
+static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
+{
+ u32 bus_info = readl(mmio_base + QS_HID_HPHY);
+ int rc, have_64bit_bus = (bus_info & QS_HPHY_64BIT);
+
+ if (have_64bit_bus &&
+ !pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) {
+ rc = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL);
+ if (rc) {
+ rc = pci_set_consistent_dma_mask(pdev, 0xffffffffULL);
+ if (rc) {
+ printk(KERN_ERR DRV_NAME
+ "(%s): 64-bit DMA enable failed\n",
+ pci_name(pdev));
+ return rc;
+ }
+ }
+ } else {
+ rc = pci_set_dma_mask(pdev, 0xffffffffULL);
+ if (rc) {
+ printk(KERN_ERR DRV_NAME
+ "(%s): 32-bit DMA enable failed\n",
+ pci_name(pdev));
+ return rc;
+ }
+ rc = pci_set_consistent_dma_mask(pdev, 0xffffffffULL);
+ if (rc) {
+ printk(KERN_ERR DRV_NAME
+ "(%s): 32-bit consistent DMA enable failed\n",
+ pci_name(pdev));
+ return rc;
+ }
+ }
+ return 0;
+}
+
+static int qs_ata_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static int printed_version;
+ struct ata_probe_ent *probe_ent = NULL;
+ void __iomem *mmio_base;
+ unsigned int board_idx = (unsigned int) ent->driver_data;
+ int rc, port_no;
+
+ if (!printed_version++)
+ printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+
+ rc = pci_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc)
+ goto err_out;
+
+ if ((pci_resource_flags(pdev, 4) & IORESOURCE_MEM) == 0) {
+ rc = -ENODEV;
+ goto err_out_regions;
+ }
+
+ mmio_base = ioremap(pci_resource_start(pdev, 4),
+ pci_resource_len(pdev, 4));
+ if (mmio_base == NULL) {
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+
+ rc = qs_set_dma_masks(pdev, mmio_base);
+ if (rc)
+ goto err_out_iounmap;
+
+ probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+ if (probe_ent == NULL) {
+ rc = -ENOMEM;
+ goto err_out_iounmap;
+ }
+
+ memset(probe_ent, 0, sizeof(*probe_ent));
+ probe_ent->dev = pci_dev_to_dev(pdev);
+ INIT_LIST_HEAD(&probe_ent->node);
+
+ probe_ent->sht = qs_port_info[board_idx].sht;
+ probe_ent->host_flags = qs_port_info[board_idx].host_flags;
+ probe_ent->pio_mask = qs_port_info[board_idx].pio_mask;
+ probe_ent->mwdma_mask = qs_port_info[board_idx].mwdma_mask;
+ probe_ent->udma_mask = qs_port_info[board_idx].udma_mask;
+ probe_ent->port_ops = qs_port_info[board_idx].port_ops;
+
+ probe_ent->irq = pdev->irq;
+ probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->mmio_base = mmio_base;
+ probe_ent->n_ports = QS_PORTS;
+
+ for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) {
+ unsigned long chan = (unsigned long)mmio_base +
+ (port_no * 0x4000);
+ qs_ata_setup_port(&probe_ent->port[port_no], chan);
+ }
+
+ pci_set_master(pdev);
+
+ /* initialize adapter */
+ qs_host_init(board_idx, probe_ent);
+
+ rc = ata_device_add(probe_ent);
+ kfree(probe_ent);
+ if (rc != QS_PORTS)
+ goto err_out_iounmap;
+ return 0;
+
+err_out_iounmap:
+ iounmap(mmio_base);
+err_out_regions:
+ pci_release_regions(pdev);
+err_out:
+ pci_disable_device(pdev);
+ return rc;
+}
+
+static int __init qs_ata_init(void)
+{
+ return pci_module_init(&qs_ata_pci_driver);
+}
+
+static void __exit qs_ata_exit(void)
+{
+ pci_unregister_driver(&qs_ata_pci_driver);
+}
+
+MODULE_AUTHOR("Mark Lord");
+MODULE_DESCRIPTION("Pacific Digital Corporation QStor SATA low-level driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, qs_ata_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(qs_ata_init);
+module_exit(qs_ata_exit);
diff -Nru a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
--- a/drivers/scsi/sata_sil.c 2005-03-01 23:38:44 -08:00
+++ b/drivers/scsi/sata_sil.c 2005-03-01 23:38:44 -08:00
@@ -71,6 +71,8 @@
{ 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
{ 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
{ 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
+ { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+ { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
{ } /* terminate list */
};
@@ -84,10 +86,12 @@
{ "ST330013AS", SIL_QUIRK_MOD15WRITE },
{ "ST340017AS", SIL_QUIRK_MOD15WRITE },
{ "ST360015AS", SIL_QUIRK_MOD15WRITE },
+ { "ST380013AS", SIL_QUIRK_MOD15WRITE },
{ "ST380023AS", SIL_QUIRK_MOD15WRITE },
{ "ST3120023AS", SIL_QUIRK_MOD15WRITE },
{ "ST3160023AS", SIL_QUIRK_MOD15WRITE },
{ "ST3120026AS", SIL_QUIRK_MOD15WRITE },
+ { "ST3200822AS", SIL_QUIRK_MOD15WRITE },
{ "ST340014ASL", SIL_QUIRK_MOD15WRITE },
{ "ST360014ASL", SIL_QUIRK_MOD15WRITE },
{ "ST380011ASL", SIL_QUIRK_MOD15WRITE },
@@ -135,6 +139,8 @@
.post_set_mode = sil_post_set_mode,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.eng_timeout = ata_eng_timeout,
@@ -332,6 +338,7 @@
void *mmio_base;
int rc;
unsigned int i;
+ int pci_dev_busy = 0;
u32 tmp, irq_mask;
if (!printed_version++)
@@ -346,8 +353,10 @@
return rc;
rc = pci_request_regions(pdev, DRV_NAME);
- if (rc)
+ if (rc) {
+ pci_dev_busy = 1;
goto err_out;
+ }
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
@@ -434,7 +443,8 @@
err_out_regions:
pci_release_regions(pdev);
err_out:
- pci_disable_device(pdev);
+ if (!pci_dev_busy)
+ pci_disable_device(pdev);
return rc;
}
diff -Nru a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
--- a/drivers/scsi/sata_sis.c 2005-03-01 23:38:57 -08:00
+++ b/drivers/scsi/sata_sis.c 2005-03-01 23:38:57 -08:00
@@ -102,6 +102,8 @@
.phy_reset = sata_phy_reset,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.eng_timeout = ata_eng_timeout,
@@ -200,14 +202,17 @@
int rc;
u32 genctl;
struct ata_port_info *ppi;
+ int pci_dev_busy = 0;
rc = pci_enable_device(pdev);
if (rc)
return rc;
rc = pci_request_regions(pdev, DRV_NAME);
- if (rc)
+ if (rc) {
+ pci_dev_busy = 1;
goto err_out;
+ }
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
@@ -259,7 +264,8 @@
pci_release_regions(pdev);
err_out:
- pci_disable_device(pdev);
+ if (!pci_dev_busy)
+ pci_disable_device(pdev);
return rc;
}
diff -Nru a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
--- a/drivers/scsi/sata_svw.c 2005-03-01 23:38:59 -08:00
+++ b/drivers/scsi/sata_svw.c 2005-03-01 23:38:59 -08:00
@@ -301,6 +301,8 @@
.phy_reset = sata_phy_reset,
.bmdma_setup = k2_bmdma_setup_mmio,
.bmdma_start = k2_bmdma_start_mmio,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.eng_timeout = ata_eng_timeout,
@@ -338,6 +340,7 @@
struct ata_probe_ent *probe_ent = NULL;
unsigned long base;
void *mmio_base;
+ int pci_dev_busy = 0;
int rc;
if (!printed_version++)
@@ -359,8 +362,10 @@
/* Request PCI regions */
rc = pci_request_regions(pdev, DRV_NAME);
- if (rc)
+ if (rc) {
+ pci_dev_busy = 1;
goto err_out;
+ }
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
@@ -433,7 +438,8 @@
err_out_regions:
pci_release_regions(pdev);
err_out:
- pci_disable_device(pdev);
+ if (!pci_dev_busy)
+ pci_disable_device(pdev);
return rc;
}
diff -Nru a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
--- a/drivers/scsi/sata_sx4.c 2005-03-01 23:38:44 -08:00
+++ b/drivers/scsi/sata_sx4.c 2005-03-01 23:38:44 -08:00
@@ -1366,6 +1366,7 @@
void *mmio_base, *dimm_mmio = NULL;
struct pdc_host_priv *hpriv = NULL;
unsigned int board_idx = (unsigned int) ent->driver_data;
+ int pci_dev_busy = 0;
int rc;
if (!printed_version++)
@@ -1380,8 +1381,10 @@
return rc;
rc = pci_request_regions(pdev, DRV_NAME);
- if (rc)
+ if (rc) {
+ pci_dev_busy = 1;
goto err_out;
+ }
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
@@ -1471,7 +1474,8 @@
err_out_regions:
pci_release_regions(pdev);
err_out:
- pci_disable_device(pdev);
+ if (!pci_dev_busy)
+ pci_disable_device(pdev);
return rc;
}
diff -Nru a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
--- a/drivers/scsi/sata_uli.c 2005-03-01 23:39:09 -08:00
+++ b/drivers/scsi/sata_uli.c 2005-03-01 23:39:09 -08:00
@@ -32,16 +32,18 @@
#include <linux/libata.h>
#define DRV_NAME "sata_uli"
-#define DRV_VERSION "0.2"
+#define DRV_VERSION "0.5"
enum {
uli_5289 = 0,
uli_5287 = 1,
+ uli_5281 = 2,
/* PCI configuration registers */
- ULI_SCR_BASE = 0x90, /* sata0 phy SCR registers */
- ULI_SATA1_OFS = 0x10, /* offset from sata0->sata1 phy regs */
-
+ ULI5287_BASE = 0x90, /* sata0 phy SCR registers */
+ ULI5287_OFFS = 0x10, /* offset from sata0->sata1 phy regs */
+ ULI5281_BASE = 0x60, /* sata0 phy SCR registers */
+ ULI5281_OFFS = 0x60, /* offset from sata0->sata1 phy regs */
};
static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
@@ -51,6 +53,7 @@
static struct pci_device_id uli_pci_tbl[] = {
{ PCI_VENDOR_ID_AL, 0x5289, PCI_ANY_ID, PCI_ANY_ID, 0, 0, uli_5289 },
{ PCI_VENDOR_ID_AL, 0x5287, PCI_ANY_ID, PCI_ANY_ID, 0, 0, uli_5287 },
+ { PCI_VENDOR_ID_AL, 0x5281, PCI_ANY_ID, PCI_ANY_ID, 0, 0, uli_5281 },
{ } /* terminate list */
};
@@ -94,6 +97,8 @@
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
@@ -125,33 +130,15 @@
MODULE_DEVICE_TABLE(pci, uli_pci_tbl);
MODULE_VERSION(DRV_VERSION);
-static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg)
+static unsigned int get_scr_cfg_addr(struct ata_port *ap, unsigned int sc_reg)
{
- unsigned int addr = ULI_SCR_BASE + (4 * sc_reg);
-
- switch (port_no) {
- case 0:
- break;
- case 1:
- addr += ULI_SATA1_OFS;
- break;
- case 2:
- addr += ULI_SATA1_OFS*4;
- break;
- case 3:
- addr += ULI_SATA1_OFS*5;
- break;
- default:
- BUG();
- break;
- }
- return addr;
+ return ap->ioaddr.scr_addr + (4 * sc_reg);
}
static u32 uli_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg);
+ unsigned int cfg_addr = get_scr_cfg_addr(ap, sc_reg);
u32 val;
pci_read_config_dword(pdev, cfg_addr, &val);
@@ -161,7 +148,7 @@
static void uli_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr);
+ unsigned int cfg_addr = get_scr_cfg_addr(ap, scr);
pci_write_config_dword(pdev, cfg_addr, val);
}
@@ -200,14 +187,17 @@
struct ata_port_info *ppi;
int rc;
unsigned int board_idx = (unsigned int) ent->driver_data;
+ int pci_dev_busy = 0;
rc = pci_enable_device(pdev);
if (rc)
return rc;
rc = pci_request_regions(pdev, DRV_NAME);
- if (rc)
+ if (rc) {
+ pci_dev_busy = 1;
goto err_out;
+ }
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
@@ -222,9 +212,11 @@
rc = -ENOMEM;
goto err_out_regions;
}
-
+
switch (board_idx) {
case uli_5287:
+ probe_ent->port[0].scr_addr = ULI5287_BASE;
+ probe_ent->port[1].scr_addr = ULI5287_BASE + ULI5287_OFFS;
probe_ent->n_ports = 4;
probe_ent->port[2].cmd_addr = pci_resource_start(pdev, 0) + 8;
@@ -232,19 +224,27 @@
probe_ent->port[2].ctl_addr =
(pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS) + 4;
probe_ent->port[2].bmdma_addr = pci_resource_start(pdev, 4) + 16;
+ probe_ent->port[2].scr_addr = ULI5287_BASE + ULI5287_OFFS*4;
probe_ent->port[3].cmd_addr = pci_resource_start(pdev, 2) + 8;
probe_ent->port[3].altstatus_addr =
probe_ent->port[3].ctl_addr =
(pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS) + 4;
probe_ent->port[3].bmdma_addr = pci_resource_start(pdev, 4) + 24;
+ probe_ent->port[3].scr_addr = ULI5287_BASE + ULI5287_OFFS*5;
ata_std_ports(&probe_ent->port[2]);
ata_std_ports(&probe_ent->port[3]);
break;
case uli_5289:
- /* do nothing; ata_pci_init_native_mode did it all */
+ probe_ent->port[0].scr_addr = ULI5287_BASE;
+ probe_ent->port[1].scr_addr = ULI5287_BASE + ULI5287_OFFS;
+ break;
+
+ case uli_5281:
+ probe_ent->port[0].scr_addr = ULI5281_BASE;
+ probe_ent->port[1].scr_addr = ULI5281_BASE + ULI5281_OFFS;
break;
default:
@@ -265,7 +265,8 @@
pci_release_regions(pdev);
err_out:
- pci_disable_device(pdev);
+ if (!pci_dev_busy)
+ pci_disable_device(pdev);
return rc;
}
diff -Nru a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
--- a/drivers/scsi/sata_via.c 2005-03-01 23:38:53 -08:00
+++ b/drivers/scsi/sata_via.c 2005-03-01 23:38:53 -08:00
@@ -24,6 +24,11 @@
If you do not delete the provisions above, a recipient may use your
version of this file under either the OSL or the GPL.
+ ----------------------------------------------------------------------
+
+ To-do list:
+ * VT6421 PATA support
+
*/
#include <linux/kernel.h>
@@ -38,11 +43,14 @@
#include <asm/io.h>
#define DRV_NAME "sata_via"
-#define DRV_VERSION "1.0"
+#define DRV_VERSION "1.1"
-enum {
- via_sata = 0,
+enum board_ids_enum {
+ vt6420,
+ vt6421,
+};
+enum {
SATA_CHAN_ENAB = 0x40, /* SATA channel enable */
SATA_INT_GATE = 0x41, /* SATA interrupt gating */
SATA_NATIVE_MODE = 0x42, /* Native mode enable */
@@ -50,10 +58,8 @@
PORT0 = (1 << 1),
PORT1 = (1 << 0),
-
- ENAB_ALL = PORT0 | PORT1,
-
- INT_GATE_ALL = PORT0 | PORT1,
+ ALL_PORTS = PORT0 | PORT1,
+ N_PORTS = 2,
NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4),
@@ -66,7 +72,8 @@
static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static struct pci_device_id svia_pci_tbl[] = {
- { 0x1106, 0x3149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, via_sata },
+ { 0x1106, 0x3149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 },
+ { 0x1106, 0x3249, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6421 },
{ } /* terminate list */
};
@@ -110,6 +117,9 @@
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
@@ -158,18 +168,132 @@
8, 4, 8, 4, 16, 256
};
+static const unsigned int vt6421_bar_sizes[] = {
+ 16, 16, 16, 16, 32, 128
+};
+
static unsigned long svia_scr_addr(unsigned long addr, unsigned int port)
{
return addr + (port * 128);
}
+static unsigned long vt6421_scr_addr(unsigned long addr, unsigned int port)
+{
+ return addr + (port * 64);
+}
+
+static void vt6421_init_addrs(struct ata_probe_ent *probe_ent,
+ struct pci_dev *pdev,
+ unsigned int port)
+{
+ unsigned long reg_addr = pci_resource_start(pdev, port);
+ unsigned long bmdma_addr = pci_resource_start(pdev, 4) + (port * 8);
+ unsigned long scr_addr;
+
+ probe_ent->port[port].cmd_addr = reg_addr;
+ probe_ent->port[port].altstatus_addr =
+ probe_ent->port[port].ctl_addr = (reg_addr + 8) | ATA_PCI_CTL_OFS;
+ probe_ent->port[port].bmdma_addr = bmdma_addr;
+
+ scr_addr = vt6421_scr_addr(pci_resource_start(pdev, 5), port);
+ probe_ent->port[port].scr_addr = scr_addr;
+
+ ata_std_ports(&probe_ent->port[port]);
+}
+
+static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev)
+{
+ struct ata_probe_ent *probe_ent;
+ struct ata_port_info *ppi = &svia_port_info;
+
+ probe_ent = ata_pci_init_native_mode(pdev, &ppi);
+ if (!probe_ent)
+ return NULL;
+
+ probe_ent->port[0].scr_addr =
+ svia_scr_addr(pci_resource_start(pdev, 5), 0);
+ probe_ent->port[1].scr_addr =
+ svia_scr_addr(pci_resource_start(pdev, 5), 1);
+
+ return probe_ent;
+}
+
+static struct ata_probe_ent *vt6421_init_probe_ent(struct pci_dev *pdev)
+{
+ struct ata_probe_ent *probe_ent;
+ unsigned int i;
+
+ probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+ if (!probe_ent)
+ return NULL;
+
+ memset(probe_ent, 0, sizeof(*probe_ent));
+ probe_ent->dev = pci_dev_to_dev(pdev);
+ INIT_LIST_HEAD(&probe_ent->node);
+
+ probe_ent->sht = &svia_sht;
+ probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET |
+ ATA_FLAG_NO_LEGACY;
+ probe_ent->port_ops = &svia_sata_ops;
+ probe_ent->n_ports = N_PORTS;
+ probe_ent->irq = pdev->irq;
+ probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->pio_mask = 0x1f;
+ probe_ent->mwdma_mask = 0x07;
+ probe_ent->udma_mask = 0x7f;
+
+ for (i = 0; i < N_PORTS; i++)
+ vt6421_init_addrs(probe_ent, pdev, i);
+
+ return probe_ent;
+}
+
+static void svia_configure(struct pci_dev *pdev)
+{
+ u8 tmp8;
+
+ pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8);
+ printk(KERN_INFO DRV_NAME "(%s): routed to hard irq line %d\n",
+ pci_name(pdev),
+ (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f);
+
+ /* make sure SATA channels are enabled */
+ pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8);
+ if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
+ printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channels (0x%x)\n",
+ pci_name(pdev), (int) tmp8);
+ tmp8 |= ALL_PORTS;
+ pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8);
+ }
+
+ /* make sure interrupts for each channel sent to us */
+ pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8);
+ if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
+ printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel interrupts (0x%x)\n",
+ pci_name(pdev), (int) tmp8);
+ tmp8 |= ALL_PORTS;
+ pci_write_config_byte(pdev, SATA_INT_GATE, tmp8);
+ }
+
+ /* make sure native mode is enabled */
+ pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8);
+ if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) {
+ printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel native mode (0x%x)\n",
+ pci_name(pdev), (int) tmp8);
+ tmp8 |= NATIVE_MODE_ALL;
+ pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
+ }
+}
+
static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
unsigned int i;
int rc;
- struct ata_port_info *ppi;
struct ata_probe_ent *probe_ent;
+ int board_id = (int) ent->driver_data;
+ const int *bar_sizes;
+ int pci_dev_busy = 0;
u8 tmp8;
if (!printed_version++)
@@ -180,20 +304,28 @@
return rc;
rc = pci_request_regions(pdev, DRV_NAME);
- if (rc)
+ if (rc) {
+ pci_dev_busy = 1;
goto err_out;
+ }
- pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8);
- if (tmp8 & SATA_2DEV) {
- printk(KERN_ERR DRV_NAME "(%s): SATA master/slave not supported (0x%x)\n",
- pci_name(pdev), (int) tmp8);
- rc = -EIO;
- goto err_out_regions;
+ if (board_id == vt6420) {
+ pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8);
+ if (tmp8 & SATA_2DEV) {
+ printk(KERN_ERR DRV_NAME "(%s): SATA master/slave not supported (0x%x)\n",
+ pci_name(pdev), (int) tmp8);
+ rc = -EIO;
+ goto err_out_regions;
+ }
+
+ bar_sizes = &svia_bar_sizes[0];
+ } else {
+ bar_sizes = &vt6421_bar_sizes[0];
}
for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++)
if ((pci_resource_start(pdev, i) == 0) ||
- (pci_resource_len(pdev, i) < svia_bar_sizes[i])) {
+ (pci_resource_len(pdev, i) < bar_sizes[i])) {
printk(KERN_ERR DRV_NAME "(%s): invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n",
pci_name(pdev), i,
pci_resource_start(pdev, i),
@@ -209,8 +341,11 @@
if (rc)
goto err_out_regions;
- ppi = &svia_port_info;
- probe_ent = ata_pci_init_native_mode(pdev, &ppi);
+ if (board_id == vt6420)
+ probe_ent = vt6420_init_probe_ent(pdev);
+ else
+ probe_ent = vt6421_init_probe_ent(pdev);
+
if (!probe_ent) {
printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
pci_name(pdev));
@@ -218,42 +353,7 @@
goto err_out_regions;
}
- probe_ent->port[0].scr_addr =
- svia_scr_addr(pci_resource_start(pdev, 5), 0);
- probe_ent->port[1].scr_addr =
- svia_scr_addr(pci_resource_start(pdev, 5), 1);
-
- pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8);
- printk(KERN_INFO DRV_NAME "(%s): routed to hard irq line %d\n",
- pci_name(pdev),
- (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f);
-
- /* make sure SATA channels are enabled */
- pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8);
- if ((tmp8 & ENAB_ALL) != ENAB_ALL) {
- printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channels (0x%x)\n",
- pci_name(pdev), (int) tmp8);
- tmp8 |= ENAB_ALL;
- pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8);
- }
-
- /* make sure interrupts for each channel sent to us */
- pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8);
- if ((tmp8 & INT_GATE_ALL) != INT_GATE_ALL) {
- printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel interrupts (0x%x)\n",
- pci_name(pdev), (int) tmp8);
- tmp8 |= INT_GATE_ALL;
- pci_write_config_byte(pdev, SATA_INT_GATE, tmp8);
- }
-
- /* make sure native mode is enabled */
- pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8);
- if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) {
- printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel native mode (0x%x)\n",
- pci_name(pdev), (int) tmp8);
- tmp8 |= NATIVE_MODE_ALL;
- pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
- }
+ svia_configure(pdev);
pci_set_master(pdev);
@@ -266,7 +366,8 @@
err_out_regions:
pci_release_regions(pdev);
err_out:
- pci_disable_device(pdev);
+ if (!pci_dev_busy)
+ pci_disable_device(pdev);
return rc;
}
diff -Nru a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
--- a/drivers/scsi/sata_vsc.c 2005-03-01 23:38:58 -08:00
+++ b/drivers/scsi/sata_vsc.c 2005-03-01 23:38:58 -08:00
@@ -217,6 +217,8 @@
.phy_reset = sata_phy_reset,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.eng_timeout = ata_eng_timeout,
@@ -255,6 +257,7 @@
static int printed_version;
struct ata_probe_ent *probe_ent = NULL;
unsigned long base;
+ int pci_dev_busy = 0;
void *mmio_base;
int rc;
@@ -274,8 +277,10 @@
}
rc = pci_request_regions(pdev, DRV_NAME);
- if (rc)
+ if (rc) {
+ pci_dev_busy = 1;
goto err_out;
+ }
/*
* Use 32 bit DMA mask, because 64 bit address support is poor.
@@ -352,7 +357,8 @@
err_out_regions:
pci_release_regions(pdev);
err_out:
- pci_disable_device(pdev);
+ if (!pci_dev_busy)
+ pci_disable_device(pdev);
return rc;
}
diff -Nru a/include/linux/ata.h b/include/linux/ata.h
--- a/include/linux/ata.h 2005-03-01 23:38:59 -08:00
+++ b/include/linux/ata.h 2005-03-01 23:38:59 -08:00
@@ -123,6 +123,8 @@
ATA_CMD_PIO_WRITE_EXT = 0x34,
ATA_CMD_SET_FEATURES = 0xEF,
ATA_CMD_PACKET = 0xA0,
+ ATA_CMD_VERIFY = 0x40,
+ ATA_CMD_VERIFY_EXT = 0x42,
/* SETFEATURES stuff */
SETFEATURES_XFER = 0x03,
diff -Nru a/include/linux/libata.h b/include/linux/libata.h
--- a/include/linux/libata.h 2005-03-01 23:38:51 -08:00
+++ b/include/linux/libata.h 2005-03-01 23:38:51 -08:00
@@ -334,11 +334,15 @@
void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
u8 (*check_status)(struct ata_port *ap);
+ u8 (*check_altstatus)(struct ata_port *ap);
+ u8 (*check_err)(struct ata_port *ap);
void (*dev_select)(struct ata_port *ap, unsigned int device);
void (*phy_reset) (struct ata_port *ap);
void (*post_set_mode) (struct ata_port *ap);
+ int (*check_atapi_dma) (struct ata_queued_cmd *qc);
+
void (*bmdma_setup) (struct ata_queued_cmd *qc);
void (*bmdma_start) (struct ata_queued_cmd *qc);
@@ -358,6 +362,9 @@
void (*port_stop) (struct ata_port *ap);
void (*host_stop) (struct ata_host_set *host_set);
+
+ void (*bmdma_stop) (struct ata_port *ap);
+ u8 (*bmdma_status) (struct ata_port *ap);
};
struct ata_port_info {
@@ -398,6 +405,8 @@
extern void ata_noop_dev_select (struct ata_port *ap, unsigned int device);
extern void ata_std_dev_select (struct ata_port *ap, unsigned int device);
extern u8 ata_check_status(struct ata_port *ap);
+extern u8 ata_altstatus(struct ata_port *ap);
+extern u8 ata_chk_err(struct ata_port *ap);
extern void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf);
extern int ata_port_start (struct ata_port *ap);
extern void ata_port_stop (struct ata_port *ap);
@@ -413,6 +422,8 @@
unsigned int ofs, unsigned int len);
extern void ata_bmdma_setup (struct ata_queued_cmd *qc);
extern void ata_bmdma_start (struct ata_queued_cmd *qc);
+extern void ata_bmdma_stop(struct ata_port *ap);
+extern u8 ata_bmdma_status(struct ata_port *ap);
extern void ata_bmdma_irq_clear(struct ata_port *ap);
extern void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat);
extern void ata_eng_timeout(struct ata_port *ap);
@@ -434,8 +445,6 @@
extern struct ata_probe_ent *
ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port);
-extern struct ata_probe_ent *
-ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port);
extern int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits);
#endif /* CONFIG_PCI */
@@ -452,26 +461,11 @@
(dev->class == ATA_DEV_ATAPI));
}
-static inline u8 ata_chk_err(struct ata_port *ap)
-{
- if (ap->flags & ATA_FLAG_MMIO) {
- return readb((void __iomem *) ap->ioaddr.error_addr);
- }
- return inb(ap->ioaddr.error_addr);
-}
-
static inline u8 ata_chk_status(struct ata_port *ap)
{
return ap->ops->check_status(ap);
}
-static inline u8 ata_altstatus(struct ata_port *ap)
-{
- if (ap->flags & ATA_FLAG_MMIO)
- return readb((void __iomem *)ap->ioaddr.altstatus_addr);
- return inb(ap->ioaddr.altstatus_addr);
-}
-
static inline void ata_pause(struct ata_port *ap)
{
ata_altstatus(ap);
@@ -593,46 +587,6 @@
static inline unsigned int sata_dev_present(struct ata_port *ap)
{
return ((scr_read(ap, SCR_STATUS) & 0xf) == 0x3) ? 1 : 0;
-}
-
-static inline void ata_bmdma_stop(struct ata_port *ap)
-{
- if (ap->flags & ATA_FLAG_MMIO) {
- void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
-
- /* clear start/stop bit */
- writeb(readb(mmio + ATA_DMA_CMD) & ~ATA_DMA_START,
- mmio + ATA_DMA_CMD);
- } else {
- /* clear start/stop bit */
- outb(inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START,
- ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
- }
-
- /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_altstatus(ap); /* dummy read */
-}
-
-static inline void ata_bmdma_ack_irq(struct ata_port *ap)
-{
- if (ap->flags & ATA_FLAG_MMIO) {
- void __iomem *mmio = ((void __iomem *) ap->ioaddr.bmdma_addr) + ATA_DMA_STATUS;
- writeb(readb(mmio), mmio);
- } else {
- unsigned long addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS;
- outb(inb(addr), addr);
- }
-}
-
-static inline u8 ata_bmdma_status(struct ata_port *ap)
-{
- u8 host_stat;
- if (ap->flags & ATA_FLAG_MMIO) {
- void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
- host_stat = readb(mmio + ATA_DMA_STATUS);
- } else
- host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
- return host_stat;
}
static inline int ata_try_flush_cache(struct ata_device *dev)