[PATCH] Replaces (2 * HZ) with DATA_TIMEOUT in /drivers/usb/atm/speedtch.c

[Telemaque Ndizihiwe]

This Patch replaces "(2 * HZ)" with "DATA_TIMEOUT" which is defined as
    #define DATA_TIMEOUT (2 * HZ)
in /drivers/usb/atm/speedtch.c in kernel 2.6.10.

Signed-off-by: Telemaque Ndizihiwe <telendiz@xxxxxxxxxx>


--- linux-2.6.10/drivers/usb/atm/speedtch.c.orig    2005-02-20 
12:44:22.235267848 +0000
+++ linux-2.6.10/drivers/usb/atm/speedtch.c    2005-02-20 
12:50:52.205983288 +0000
@@ -494,7 +494,7 @@ static void speedtch_upload_firmware(str
    /* URB 7 */
    if (dl_512_first) {    /* some modems need a read before writing 
the firmware */
        ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, 
SPEEDTCH_ENDPOINT_FIRMWARE),
-                   buffer, 0x200, &actual_length, 2 * HZ);
+                   buffer, 0x200, &actual_length, DATA_TIMEOUT);

        if (ret < 0 && ret != -ETIMEDOUT)
            dbg("speedtch_upload_firmware: read BLOCK0 from modem 
failed (%d)!", ret);

--- linux-2.6.10/drivers/usb/atm/speedtch.c.orig	2005-02-20 12:44:22.235267848 +0000
+++ linux-2.6.10/drivers/usb/atm/speedtch.c	2005-02-20 12:50:52.205983288 +0000
@@ -494,7 +494,7 @@ static void speedtch_upload_firmware(str
 	/* URB 7 */
 	if (dl_512_first) {	/* some modems need a read before writing the firmware */
 		ret = usb_bulk_msg(usb_dev, usb_rcvbulkpipe(usb_dev, SPEEDTCH_ENDPOINT_FIRMWARE),
-				   buffer, 0x200, &actual_length, 2 * HZ);
+				   buffer, 0x200, &actual_length, DATA_TIMEOUT);
 
 		if (ret < 0 && ret != -ETIMEDOUT)
 			dbg("speedtch_upload_firmware: read BLOCK0 from modem failed (%d)!", ret);