Re: [linux-usb-devel] 2.6.11-rc[23]: swsusp & usb regression

[Pavel Machek]

Hi!

> > In 2.6.11-rc[23], I get problems after swsusp resume:
> > 
> > Feb  4 23:54:39 amd kernel: Restarting tasks...<3>hub 3-0:1.0:
> > over-current change on port 1
> > Feb  4 23:54:39 amd kernel:  done
> > Feb  4 23:54:39 amd kernel: hub 3-0:1.0: connect-debounce failed, port
> > 1 disabled
> > Feb  4 23:54:39 amd kernel: hub 3-0:1.0: over-current change on port 2
> > Feb  4 23:54:39 amd kernel: usb 3-2: USB disconnect, address 2
> > 
> > After unplugging usb bluetooth key, machine hung. Sysrq still
> > responded with help but I could not get any usefull output.
> 
> Your logs don't indicate which host controller driver is bound to each of 
> your hubs.  /proc/bus/usb/devices will contain that information.  Without 
> it, it's hard to diagnose what happened.

I do not think I have any hubs... no external hubs anyway. And I do
not have /proc/bus/usb/devices file :-(. There's something in
/sys/bus/usb/devices/.

> As things stand now, however, there's likely to be lots of problems in the 
> coordination of suspend/resume activities among the HCDs, the glue layer, 
> and the hub driver.  One thing you could try is to turn on 
> CONFIG_USB_SUSPEND.  It's likely to change things, although not 
> necessarily for the better.  :-)

:-).
								Pavel
-- 
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/