Re: 2.6.11-rc3-mm1

From: Sean Neakums
Date: Fri Feb 04 2005 - 17:55:15 EST


I gave this a crack on the PowerBook5.4 -- somewhat more successful
than 2.6.11-rc2-mm2. It boots, radeonfb works and X starts. However,
suspend seems a tad faster than usual, and resume stops after setting
the hard disk's DMA mode, although the log below made it to disk.

eth0: suspending, WakeOnLan disabled
orinoco_lock() called with hw_unavailable (dev=ef89d800)
radeonfb (0000:00:10.0): suspending to state: 3...
HID1, before: 8000fc80
radeonfb (0000:00:10.0): resuming from state: 3...
PCI: Enabling device 0000:00:10.0 (0000 -> 0003)
HID1, after: 8000fc80
Apple USB OHCI 0001:10:18.0 disabled by firmware
Apple USB OHCI 0001:10:19.0 disabled by firmware
ehci_hcd 0001:10:1b.2: park 0
ehci_hcd 0001:10:1b.2: USB 2.0 restarted, EHCI 1.00, driver 10 Dec 2004
eth1: New link status: Connected (0001)
eth0: resuming
hda: Enabling Ultra DMA 5

Here's a resume log with 2.6.9 + sleep patch:

eth0: suspending, WakeOnLan disabled
radeonfb: suspending to state: 3...
HID1, before: 8000fc80
radeonfb (0000:00:10.0): resuming from state: 0...
PCI: Enabling device 0000:00:10.0 (0000 -> 0003)
HID1, after: 8000fc80
Apple USB OHCI 0001:10:18.0 disabled by firmware
Apple USB OHCI 0001:10:19.0 disabled by firmware
enable_irq(29) unbalanced
enable_irq(63) unbalanced
enable_irq(63) unbalanced
eth0: resuming
PHY ID: 1410cc1, addr: 0
hda: Enabling Ultra DMA 5
hdc: MDMA, cycleTime: 120, accessTime: 90, recTime: 30
hdc: Set MDMA timing for mode 2, reg: 0x00011d26
hdc: Enabling MultiWord DMA 2
hub 1-0:1.0: reactivate --> -22
hub 1-0:1.0: reactivate --> -22
hub 2-0:1.0: reactivate --> -22
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/