Re: [Linux-usb-users] USB problem with a mass storage device on 2.6.10
From: Roseline Bonchamp
Date: Mon Jan 10 2005 - 13:34:58 EST
> What is in /proc/bus/usb/devices when it doesn't work (and when it works)?
> What command fails?
When it does'nt work, I see my 2 UHCI controllers and my EHCI
controller (driver=Hub)
When it does work, I see the same, plus:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 15 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0ea0 ProdID=2168 Rev= 2.00
S: Manufacturer=USB
S: Product=Flash Disk
S: SerialNumber=106C1141B1C3762C
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=125us
What fails is that I don't see anything related to USB mass storage in
logs, and so cannot access the device through de SCSI interface
(/dev/sda...)
Also I've just fount out that it seems that "echo y >
/sys/module/usbcore/parameters/old_scheme_first" makes it work!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/