Re: Problems with 2.6.10

[Bill Davidsen]

Fryderyk Mazurek wrote:
> Hello.
>
> My kernel 2.6.10 I compiled two times. First with ACPI and second
> fully without ACPI. And the same situation.
> For me this situation is strange, because usually reset should help,
> but not this time. I thought that maybe my BIOS is too old. But with
> 2.6.9 works. Therefore I don't know. Now I use 2.6.9.
>
> Fryderyk.
>
> ---- Wiadomość Oryginalna ----
> Od: Len Brown <len.brown@xxxxxxxxx>
> Do: Fryderyk Mazurek <dedyk@xxxxxx>
> Kopia do: linux-kernel@xxxxxxxxxxxxxxx
> Data: 27 Dec 2004 21:44:11 -0500
> Temat: Re: Problems with 2.6.10
>
>
> > On Mon, 2004-12-27 at 12:11, Fryderyk Mazurek wrote:
> >
> >
> > > problem starts when I do reboot. On boot screen my bios can't detect
> > > my disk. Bios stops and nothing.
> >
> > Does reboot work if the initial boot is with acpi=off?

With that system, perhaps acpi=ht would be better if he uses the HT. And 
pci=routeirq may help as well, although it told me it was disabling 
IRQ18 and didn't!

--
bill davidsen <davidsen@xxxxxxx>
  CTO TMR Associates, Inc
  Doing interesting things with small computers since 1979
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/