Meelis Roos wrote:no need : it is in rc2.
mc> try to do an "echo auto > /sys/bus/pnp/device_number/resources"
mc> mc> It will reenable the device.
I tried this on my Toshiba Satellite 1800-314 and the device gets IO
resources but is still disabled. echo activate > ... will enable it but
the smc-ircc2 driver still finds that the device is disabled (in
2.6.10-rc2+yesterdays BK):
nartsiss:~# cat /sys/bus/pnp/devices/00\:0a/options
Dependent: 01 - Priority acceptable
port 0x3f8-0x3f8, align 0x0, size 0x8, 16-bit address decoding
Dependent: 02 - Priority acceptable
port 0x2e8-0x2e8, align 0x0, size 0x8, 16-bit address decoding
Dependent: 03 - Priority acceptable
port 0x2f8-0x2f8, align 0x0, size 0x8, 16-bit address decoding
Dependent: 04 - Priority acceptable
port 0x3e8-0x3e8, align 0x0, size 0x8, 16-bit address decoding
that's very strange : you must have 2 io entries, 1 dma entry and an irq entry.
Could you try pnpacpi from mm series ?