Re: [RFC][PATCH] Way for platforms to alter built-in serial ports

[David Woodhouse]

On Wed, 2004-10-06 at 08:29 +0100, Russell King wrote:
> The only reason it exists in its current form is because Alan says
> we can't get rid of the serial port initialisation due to the x86
> requirement for serial console to be initialised reasonably early.
> 
> Unfortunately the early console stuff (afaik) never made it in to
> the kernel, so we've had to keep this hanging around.
> 
> Maybe once this problem is solved we can consider dwmw2's suggestion.

Serial console working really early isn't just a requirement for x86.
It's useful elsewhere too. 

The problem is that 'console=ttySx' doesn't actually do anything unless
port numer 'x' is already registered and working. We should fix that --
we ought to be able to use 'console=ttySx' on the command line and have
the console get registered with the core printk code later, when some
8250 sub-driver (8250_platform, 8250_pci, etc.) actually registers the
port which becomes number 'x'. 

That would allow 'early' serial consoles to have none of the horrible
special-cased 'earlyconsole' crap -- we just call register_serial() (or
early_serial_setup() or whatever) as soon as it's actually possible to
poke at the port.

It also fixes the case of serial console on a PCI device.

-- 
dwmw2

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/