Re: linux 2.6.9 on alpha noritake

[Alexander Rauth]

If found another strangeness ....
this is running 2.6.8.1 same machine


0000:00:05.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide
SCSI (rev 05)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 248, cache line size 10
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at 9000 [size=34M]
????????????????????????????????????????????????????????? how this??
	Region 1: Memory at 0000000002270000 (32-bit, non-prefetchable)
[size=4K]
	Expansion ROM at 0000000000010000 [disabled]

0000:00:07.0 Non-VGA unclassified device: Intel Corp. 82375EB/SB PCI to
EISA Bridge (rev 15)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 248

0000:00:0b.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895
(rev 01)
	Subsystem: Tekram Technology Co.,Ltd. DC-390U2W
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 255 (7500ns min, 16000ns max), cache line size 10
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at 9400 [size=34M]
??????????????????????????????????????????????????????? same ....
	Region 1: Memory at 0000000002272000 (32-bit, non-prefetchable)
[size=256]
	Region 2: Memory at 0000000002271000 (32-bit, non-prefetchable)
[size=4K]
	Expansion ROM at 0000000000010000 [disabled]

0000:00:0d.0 VGA compatible controller: ATI Technologies Inc Radeon
RV200 QW [Radeon 7500] (prog-if 00 [VGA])
	Subsystem: C.P. Technology Co. Ltd RV200 QW [Radeon 7500 PCI Dual
Display]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 255 (2000ns min), cache line size 10
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at 0000000008000000 (32-bit, prefetchable)
	Region 1: I/O ports at 9800 [size=256]
??????????????????????????????????????? this seems to be right to me
	Region 2: Memory at 0000000002260000 (32-bit, non-prefetchable)
[size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:0e.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX
[Cyclone] (rev 64)
	Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 248 (2500ns min, 2500ns max), cache line size 10
	Interrupt: pin A routed to IRQ 24
	Region 0: I/O ports at 9c00 [size=34M]
???????????????????????????????????? and again
	Region 1: Memory at 0000000002273000 (32-bit, non-prefetchable)
[size=128]
	Expansion ROM at 0000000000020000 [disabled]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME+



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/