Re: 2.6.9-mm1

From: Dominik Karall
Date: Fri Oct 22 2004 - 19:17:43 EST


On Friday 22 October 2004 12:20, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9/2.6.9-m
>m1/

I got this error without starting any tv application:
saa7134[0]/irq[10,4251666]: r=0x20 s=0x00 PE
saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit

I don't know when it exactly occurs, it was there in dmesg after a few hours
the machine was running. (btw, no cable was connected to the card).

card related info:
$ dmesg | grep saa
saa7130/34: v4l2 driver version 0.2.12 loaded
saa7134[0]: found at 0000:00:08.0, rev: 1, irq: 19, latency: 32, mmio:
0xe2426000
saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected]
saa7134[0]: board init: gpio is 0
saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9
saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00
saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner: chip found at addr 0xc0 i2c-bus saa7134[0]
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by saa7134[0]
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: registered device radio0

best regards,
dominik

Attachment: pgp00000.pgp
Description: PGP signature