Re: [BK PATCHES] ide-2.6 update

[Bartlomiej Zolnierkiewicz]

On Fri, 22 Oct 2004 19:07:15 +0100, Russell King
<rmk+lkml@xxxxxxxxxxxxxxxx> wrote:
> On Fri, Oct 22, 2004 at 07:38:44PM +0200, Bartlomiej Zolnierkiewicz wrote:
> > @@ -498,14 +483,6 @@
> >                       ICS_ARCIN_V6_INTRSTAT_1)) & 1;
> >  }
> >
> > -static int icside_dma_verbose(ide_drive_t *drive)
> > -{
> > -     printk(", %s (peak %dMB/s)",
> > -             ide_xfer_verbose(drive->current_speed),
> > -             2000 / drive->drive_data);
> > -     return 1;
> > -}
> > -
> >  static int icside_dma_timeout(ide_drive_t *drive)
> >  {
> >       printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
> > @@ -554,7 +531,6 @@
> >       hwif->dma_start         = icside_dma_start;
> >       hwif->ide_dma_end       = icside_dma_end;
> >       hwif->ide_dma_test_irq  = icside_dma_test_irq;
> > -     hwif->ide_dma_verbose   = icside_dma_verbose;
> >       hwif->ide_dma_timeout   = icside_dma_timeout;
> >       hwif->ide_dma_lostirq   = icside_dma_lostirq;
> 
> Why are you denying me the ability to report detailed drive transfer
> speed information?  Would you prefer me to printk a separate line
> and further clutter up the message log instead?

>From the changelog:
> * icside.c version repeated info given by ->ide_dma_check()

If DMA is going to be used:
* ->ide_dma_check is always called
* icside_dma_check() always calls icside_set_speed()
* icside_set_speed() always does

	printk("%s: %s selected (peak %dMB/s)\n", drive->name,
		ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data);

so what am I missing?

Bartlomiej
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/