Re: swsusp: kill crash when too much memory is free
From: Rafael J. Wysocki
Date: Thu Sep 09 2004 - 17:08:53 EST
On Thursday 09 of September 2004 17:42, Pavel Machek wrote:
> Hi!
>
> If too much memory is free, swsusp dies in quite a ugly way. Even when
> it is not neccessary to relocate pagedir, it is proably still
> neccessary to relocate individual pages. Thanks to Kurt Garloff and
> Stefan Seyfried...
> Pavel
> PS: And could I have one brown paper bag, please?
I applied this and it didn't fix my problems with resuming, unfortunately, but
it changed the symptoms. Namely, if USB modules are not unloaded before
suspending, I get:
Relocating pagedir .....:::::|
Reading image data (11315
pages): ...................................................................................
Stopping tasks: ==|
Freeing memory: |
PM: Restoring saved image.
<7>PM: Image restored successfully.
Losing some ticks... checking if CPU frequency changed.
warning: many lost ticks.
Your time source seems to be instable or some driver is hogging interupts
rip free_hot_cold_page+0x31/0x130
Warning: CPU frequency out of sync: cpufreq and timing core thinks of 800000,
is 1800000 kHz.
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: HC died; cleaning up
usb 1-2: USB disconnect, address 3
Badness in hcd_endpoint_disable at drivers/usb/core/hcd.c:1310
Call Trace:<ffffffffa0045b80>{:usbcore:hcd_endpoint_disable+0}
<ffffffffa0045beb>{:usbcore:hcd_endpoint_disable+107}
<ffffffffa0046bb9>{:usbcore:usb_disable_endpoint+41}
<ffffffffa0046d3a>{:usbcore:usb_disable_device+26}
<ffffffffa0042b7c>{:usbcore:usb_disconnect+188}
<ffffffffa0042ac2>{:usbcore:usb_disconnect+2}
<ffffffffa0044890>{:usbcore:hcd_panic+0}
<ffffffffa00448da>{:usbcore:hcd_panic+74}
<ffffffff80152742>{worker_thread+674}
<ffffffff80136930>{default_wake_function+0}
<ffffffff80134e23>{__wake_up_common+67}
<ffffffff80136930>{default_wake_function+0}
<ffffffff801524a0>{worker_thread+0} <ffffffff8015945d>{kthread+205}
<ffffffff80111673>{child_rip+8} <ffffffff80159390>{kthread+0}
<ffffffff8011166b>{child_rip+0}
Badness in hcd_endpoint_disable at drivers/usb/core/hcd.c:1310
If they _are_ unloaded (ie "rmmod ehci_hcd ohci_hcd usbserial usbhid") before
suspending, I get:
Relocating pagedir not necessary
Reading image data (11335
pages): ...................................................................................
Stopping tasks: ==|
Freeing memory: |
PM: Restoring saved image.
<7>PM: Image restored successfully.
Losing some ticks... checking if CPU frequency changed.
warning: many lost ticks.
Your time source seems to be instable or some driver is hogging interupts
rip swsusp_free+0xfe/0x1a0
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:02.1 to 64
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:02.2 to 64
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:06.0 to 64
Warning: CPU frequency out of sync: cpufreq and timing core thinks of 800000,
is 1800000 kHz.
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:02:01.2[C] -> GSI 11 (level, low) -> IRQ 11
And then silence (the box hangs solid and there's no more output on the serial
console).
Well, this would indicate that there's a problem related to CPU scaling, so I
compiled it out. Then, I got:
Relocating pagedir .....:::::|
Reading image data (11667
pages): ...................................................................................
Stopping tasks: ==|
Freeing memory: |
PM: Restoring saved image.
<0>double fault: 0000 [1]
CPU 0
Modules linked in: parport_pc lp parport joydev sg st sd_mod sr_mod scsi_mod
snd_seq_oss snd_seq_midi_event snd_seq d
Pid: 12161, comm: bash Not tainted 2.6.9-rc1-mm4
RIP: 0010:[<ffffffff801245d7>] <ffffffff801245d7>{do_page_fault+55}
RSP: 0000:000001001fdfff48 EFLAGS: 00010016
RAX: ffffffff801245a0 RBX: 0000000000000001 RCX: 000ffffffffff000
RDX: 000000001fce3000 RSI: 0000000000000000 RDI: 000001001fe00068
RBP: 0000000080111203 R08: 0000000000000000 R09: 000001001fe27e64
R10: 0000000000000000 R11: 0000000000000064 R12: 0000000000000000
R13: 000001001b746618 R14: 000001000e0a3430 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffffff805b7340(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 0000000080050033
CR2: 000001001fdfff38 CR3: 0000000000101000 CR4: 00000000000006e0
Process bash (pid: 12161, threadinfo 00000100102b6000, task 000001000e0a3430)
Stack:
and nothing more. Next time I unloaded dm_mod additionally before suspending
and I got:
Relocating pagedir .....:::::|
Reading image data (11498
pages): ...................................................................................
Stopping tasks: ==|
Freeing memory: |
PM: Restoring saved image.
<7>PM: Image restored successfully.
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:02.1 to 64
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:02.2 to 64
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:06.0 to 64
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:02:01.2[C] -> GSI 11 (level, low) -> IRQ 11
And then silence ...
This is 100% reproducible (ie unload USB modules and dm_mod, suspend the
machine, try to wake it up, hangs solid).
Can you tell me, please, if there's anything I can compile out/in to debug it
a bit more? Or can I put some printk()s somewhere in the code to get some
more info? Any suggestions welcome.
Greets,
RJW
--
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
-- Lewis Carroll "Alice's Adventures in Wonderland"
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/