Cyclades assynchronous driver - implementing sysfs and bugcorrection
From: Germano Barreiro
Date: Thu Sep 09 2004 - 13:18:50 EST
Hi
This patch implements sysfs support and corrects a bug in the cyclades
assynchronous card driver and is intended for review.
Regards,
Germano
--- a/drivers/char/cyclades.c 2004-08-20 11:19:20.000000000 -0300
+++ b/drivers/char/cyclades.c 2004-09-08 10:56:31.000000000 -0300
@@ -2,7 +2,7 @@
#define Z_WAKE
#undef Z_EXT_CHARS_IN_BUFFER
static char rcsid[] =
-"$Revision: 2.3.2.20 $$Date: 2004/02/25 18:14:16 $";
+"$Revision: 1.7 $$Date: 2004/09/03 22:55:55 $";
/*
* linux/drivers/char/cyclades.c
@@ -25,6 +25,27 @@
* This version supports shared IRQ's (only for PCI boards).
*
* $Log: cyclades.c,v $
+ * Revision 1.7 2004/09/03 22:55:55 germano
+ * made the module read the correct number of boards from the firmware when using a Z board
+ *
+ * Revision 1.6 2004/09/02 13:10:51 germano
+ * gave a more correct name to the function that exports information under /sys/device
+ *
+ * Revision 1.5 2004/09/01 21:38:23 germano
+ * old procfs code ported to new sysfs
+ *
+ * Revision 1.4 2004/08/30 18:46:05 germano
+ * new try to implement sysfs for async
+ *
+ * Revision 1.1 2004/08/27 20:55:55 germano
+ * sysfs work on async
+ *
+ * Revision 1.2 2004/08/26 20:30:11 germano
+ * daily global commit
+ *
+ * Revision 1.1 2004/08/20 20:13:19 germano
+ * started sysfs support coding
+ *
* Prevent users from opening non-existing Z ports.
*
* Revision 2.3.2.8 2000/07/06 18:14:16 ivan
@@ -646,13 +667,13 @@
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
-#include <linux/cyclades.h>
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
+
#include <asm/system.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -676,6 +697,7 @@
#include <linux/stat.h>
#include <linux/proc_fs.h>
+#include <linux/cyclades.h>
static void cy_throttle (struct tty_struct *tty);
static void cy_send_xchar (struct tty_struct *tty, char ch);
@@ -700,6 +722,7 @@
#define JIFFIES_DIFF(n, j) ((j) - (n))
+static char _version[80];
static struct tty_driver *cy_serial_driver;
#ifdef CONFIG_ISA
@@ -850,6 +873,9 @@
};
#endif
+
+
+
static void cy_start(struct tty_struct *);
static void set_line_char(struct cyclades_port *);
static int cyz_issue_cmd(struct cyclades_card *, uclong, ucchar, uclong);
@@ -2528,6 +2554,13 @@
int retval, line;
unsigned long page;
+ uclong numberports=0;
+
+ /* these were included to make the necessary code for this
+ module to report the correct number of ports when using a Z-board */
+ struct ZFW_CTRL *zfw_ctrl;
+ struct BOARD_CTRL *board_ctrl;
+
line = tty->index;
if ((line < 0) || (NR_PORTS <= line)){
return -ENODEV;
@@ -2546,6 +2579,14 @@
struct FIRM_ID *firm_id = (struct FIRM_ID *)
(cinfo->base_addr + ID_ADDRESS);
+ /* find out the number of ports registered by the firmware*/
+ zfw_ctrl = (struct ZFW_CTRL *)(cy_card[info->card].base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff));
+ board_ctrl = &(zfw_ctrl->board_ctrl);
+ numberports = cy_readl(&board_ctrl->n_channel);
+
+ /* prints the port opened together with the number of ports for that board */
+ printk(KERN_INFO "Opening port %d of %lu in this board\n",line,numberports);
+
if (!ISZLOADED(*cinfo)) {
if (((ZE_V1 ==cy_readl(&((struct RUNTIME_9060 *)
(cinfo->ctl_addr))->mail_box_0)) &&
@@ -2647,9 +2688,12 @@
info->throttle = 0;
#ifdef CY_DEBUG_OPEN
- printk(" cyc:cy_open done\n");/**/
+ printk(" cyc:cy_open done\n");
#endif
-
+ /*records line struct pointer for recovering when reading sysfs*/
+ cy_card[info->card].pdev->dev.driver_data=info;
+
+ device_create_file(&(cy_card[info->card].pdev->dev), &_cydas[line]);
return 0;
} /* cy_open */
@@ -2874,6 +2918,7 @@
#endif
CY_UNLOCK(info, flags);
+ device_remove_file(&cy_card[info->card].pdev->dev, &_cydas[info->line]);
return;
} /* cy_close */
@@ -4831,6 +4876,13 @@
uclong Ze_phys0[NR_CARDS], Ze_phys2[NR_CARDS];
unsigned char Ze_irq[NR_CARDS];
struct pci_dev *Ze_pdev[NR_CARDS];
+ uclong numberports=0;
+
+ /* these were included to make the necessary code for this
+ module to report the correct number of ports when using a Z-board */
+ struct FIRM_ID *firm_id;
+ struct ZFW_CTRL *zfw_ctrl;
+ struct BOARD_CTRL *board_ctrl;
for (i = 0; i < NR_CARDS; i++) {
/* look for a Cyclades card by vendor and device id */
@@ -5152,6 +5204,7 @@
printk("%d channels starting from port %d.\n",
cy_pci_nchan,cy_next_channel);
+
cy_next_channel += cy_pci_nchan;
}
}
@@ -5225,10 +5278,16 @@
cy_card[j].ctl_addr = cy_pci_addr0;
cy_card[j].irq = (int) cy_pci_irq;
cy_card[j].bus_index = 1;
- cy_card[j].first_line = cy_next_channel;
+ cy_card[j].first_line = cy_next_channel;
cy_card[j].num_chips = -1;
cy_card[j].pdev = pdev;
+ /* find out the number of ports registered by the firmware*/
+ firm_id = (struct FIRM_ID *)(cy_pci_addr2 + ID_ADDRESS);
+ zfw_ctrl = (struct ZFW_CTRL *)(cy_pci_addr2 + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff));
+ board_ctrl = &(zfw_ctrl->board_ctrl);
+ numberports = cy_readl(&board_ctrl->n_channel);
+
/* print message */
#ifdef CONFIG_CYZ_INTR
/* don't report IRQ if board is no IRQ */
@@ -5243,8 +5302,6 @@
j+1,(ulong)cy_pci_phys2,
(ulong)(cy_pci_phys2 + CyPCI_Ze_win - 1));
- printk("%d channels starting from port %d.\n",
- cy_pci_nchan,cy_next_channel);
cy_next_channel += cy_pci_nchan;
}
if (ZeIndex != 0) {
@@ -5276,6 +5333,8 @@
rcsvers, rcsdate);
printk(" built %s %s\n",
__DATE__, __TIME__);
+ /* _version is later used by show_sys_data */
+ sprintf(_version,"Cyclades driver %s %s\n built %s %s\n", rcsvers, rcsdate, __DATE__, __TIME__);
} /* show_version */
static int
@@ -5386,8 +5445,9 @@
unsigned long mailbox;
unsigned short chip_number;
int nports;
-
+
cy_serial_driver = alloc_tty_driver(NR_PORTS);
+
if (!cy_serial_driver)
return -ENOMEM;
show_version();
@@ -5668,4 +5728,275 @@
} /* cy_setup */
#endif /* MODULE */
+/*****************************************************************************************************
+ SYSFS SUPPORT FUNCTIONS
+ Germano Barreiro - 2/09/2004
+ ****************************************************************************************************/
+
+ /***************************************************************************************************
+ show_sys_data - shows the data exported to sysfs/device, mostly the signals status involved in the
+ serial communication such as CTS,RTS,DTS,etc
+ This function is called by the kernel whenever any user mode process tries to read a file created
+ in the virtual filesystem /sys/device/.../ttyC?
+ The code internal to this function, with few changes, was extracted from the original procfs
+ implementation in the cyclades async serial driver, made by Ivan.
+
+ p - points to the struct device associated with this channel. Besides some other potentially useful
+ information for future debugging tasks, cy_open() saves there a pointer to the cyclades_port
+ associated with this channel, which in recovered in this function.
+ buf - points to the buffer where the data to be available in the file mentioned above must be written
+
+ Returns the number of bytes written to user space
+ ***************************************************************************************************/
+ static ssize_t show_sys_data(struct device *p, char *buf)
+ {
+
+ int len, z;
+ int flow; // 0:none, 1:soft ctr, 2: hard ctr
+ int chip;
+ //cy_open recorded the cyclades_port pointer here
+ struct cyclades_port *info = p->driver_data;
+ //ind will be an index to the cyclades_port struct associated to this device in the array cy_port[]
+ int ind = info - cy_port;
+ struct tty_struct * tty = info->tty;
+ unsigned char *base_addr = (unsigned char *) cy_card[info->card].base_addr;
+ struct FIRM_ID *firm_id = (struct FIRM_ID *) (base_addr + ID_ADDRESS);
+ struct ZFW_CTRL *zfw_ctrl = (struct ZFW_CTRL *) (base_addr + (cy_readl(&firm_id->zfwctrl_addr) & 0xfffff));
+ struct CH_CTRL *ch_ctrl = zfw_ctrl->ch_ctrl;
+ struct BUF_CTRL *buf_ctrl = &(zfw_ctrl->buf_ctrl[ind - cy_card[info->card].first_line]);
+ int card = info->card;
+ int channel = (info->line) - (cy_card[card].first_line);
+ int index = cy_card[card].bus_index;
+ uclong control;
+
+ //refer to cyclades.h to many of the symbols below
+ if ( tty == 0 ) {
+ len = sprintf(buf, "%s:%s\n", cysys_state, cysys_close);
+ return len;
+ }
+ len = sprintf(buf, "%s:%s\n", cysys_state, cysys_open);
+
+ //Printing tty and board type
+ if (IS_CYC_Z(cy_card[card])) {
+ z = 1;
+ len += sprintf(buf+len, "%s:%s\n", cysys_ct, cysys_z);
+ } else {
+ z = 0;
+ len += sprintf(buf+len, "%s:%s\n", cysys_ct, cysys_y);
+ }
+
+ //Printing the baud rate
+ len += sprintf(buf+len, "%s:%d\n", cysys_baud, tty_get_baud_rate(tty) );
+
+ //Printing the flow control type
+ if (I_IXOFF(tty)) {
+ flow = 1;
+ len += sprintf(buf+len, "%s:%s\n", cysys_fc, cysys_fc_soft);
+ } else if ( C_CRTSCTS(tty) ) {
+ flow = 2;
+ len += sprintf(buf+len, "%s:%s\n", cysys_fc, cysys_fc_hard);
+ } else {
+ flow = 0;
+ len += sprintf(buf+len, "%s:%s\n", cysys_fc, cysys_fc_none);
+ }
+
+ //printing the flow status
+ if (z == 1) { // Cyclades-Z board
+ if ( flow == 2 ) { //hard flow control
+ uclong control = cy_readl(&ch_ctrl[channel].rs_status);
+ if (control & C_RS_RTS) {
+ len += sprintf(buf+len, "%s:%s\n", cysys_rxfcs, cysys_on);
+ } else {
+ len += sprintf(buf+len, "%s:%s\n", cysys_rxfcs, cysys_off);
+ }
+
+ if (control & C_RS_CTS) {
+ len += sprintf(buf+len, "%s:%s\n", cysys_txfcs, cysys_on);
+ } else {
+ len += sprintf(buf+len, "%s:%s\n", cysys_txfcs, cysys_off);
+ }
+ } else if (flow == 1) { //soft flow control
+ // Fix me. Find how to discover the software flow control state
+ }
+ } else { // Cyclades-Y board
+ uclong aux;
+ chip = channel >> 2;
+ channel &= 0x03;
+ base_addr = (unsigned char *)(cy_card[card].base_addr
+ + (cy_chip_offset[chip] << index));
+
+ if ( flow == 1 ) { // Software flow control
+ /*
+ int ccsr;
+ unsigned long flags;
+ CY_LOCK(info, flags);
+ cy_writeb((u_long) base_addr + (CyCAR << index), (u_char) channel);
+ ccsr = cy_readb((u_long) base_addr + (CyCCSR << index));
+ CY_UNLOCK(info, flags);
+ len += sprintf(buf+len, "ccsr:%x\n", ccsr);
+ */
+ // Fix me. It seems the CCSR register is not responding properly
+ }
+
+ if ( flow == 2 ) { // Hardware flow control
+ uclong control = cy_readb((u_long) base_addr + (CyMSVR1 << index));
+
+ if (info->rtsdtr_inv) {
+ aux = CyDTR;
+ } else {
+ aux = CyRTS;
+ }
+
+ if (control & aux) {
+ len += sprintf(buf+len, "%s:%s\n", cysys_rxfcs, cysys_on);
+ } else {
+ len += sprintf(buf+len, "%s:%s\n", cysys_rxfcs, cysys_off);
+ }
+ }
+ }
+
+ //Printing status of the signals: DCD, DSR, CTS, RTS, DTR
+ if (z == 1) { // Cyclades-Z board
+ control = cy_readl(&ch_ctrl[channel].rs_status);
+ } else {
+ control = cy_readb((u_long) base_addr + (CyMSVR1 << index));
+ }
+
+ // DCD status
+ len += sprintf(buf+len, "%s:%s\n", cysys_dcd,
+ (control & (z ? C_RS_DCD:CyDCD) ) ? cysys_on : cysys_off);
+
+ // DSR Status
+ len += sprintf(buf+len, "%s:%s\n", cysys_dsr,
+ (control & (z ? C_RS_DSR:CyDSR) ) ? cysys_on : cysys_off);
+
+ // CTS status
+ len += sprintf(buf+len, "%s:%s\n", cysys_cts,
+ (control & (z ? C_RS_CTS:CyCTS) ) ? cysys_on : cysys_off);
+
+ // RTS status
+ len += sprintf(buf+len, "%s:%s\n", cysys_rts,
+ (control & (z ? C_RS_RTS:CyRTS) ) ? cysys_on : cysys_off);
+
+ // DTR status
+ len += sprintf(buf+len, "%s:%s\n", cysys_dtr,
+ (control & (z ? C_RS_DTR:(info->rtsdtr_inv ? CyRTS : CyDTR)) ) ? cysys_on : cysys_off);
+
+
+ //Printing status of tty buffer
+ len += sprintf(buf+len,"%s:%d/%d\n", cysys_ttyrxbuf,
+ tty->read_cnt,N_TTY_BUF_SIZE);
+ len += sprintf(buf+len, "%s:%d/%ld\n", cysys_ttytxbuf,
+ info->xmit_cnt, SERIAL_XMIT_SIZE);
+
+ //Printing the status of onboard buffer (for cyclades z only)
+ if ( z == 1) {
+ volatile uclong put, get, bufsize;
+ volatile int char_count;
+ //rx
+ get = cy_readl(&buf_ctrl->rx_get);
+ put = cy_readl(&buf_ctrl->rx_put);
+ bufsize = cy_readl(&buf_ctrl->rx_bufsize);
+ if (put >= get) {
+ char_count = put - get;
+ } else {
+ char_count = put - get + bufsize;
+ }
+ len += sprintf(buf+len, "%s:%d/%ld\n", cysys_boardrxbuf,
+ char_count, bufsize);
+
+ //tx
+ get = cy_readl(&buf_ctrl->tx_get);
+ put = cy_readl(&buf_ctrl->tx_put);
+ bufsize = cy_readl(&buf_ctrl->tx_bufsize);
+ if (put >= get) {
+ char_count = put - get;
+ } else {
+ char_count = put - get + bufsize;
+ }
+ len += sprintf(buf+len, "%s:%d/%ld\n", cysys_boardtxbuf,
+ char_count, bufsize);
+ }
+
+ //Printing communication data len
+ if (z == 1){
+ uclong data_len, pari;
+ char par;
+ int nstop, char_len;
+
+ data_len = cy_readl(&ch_ctrl[channel].comm_data_l);
+ pari = cy_readl(&ch_ctrl[channel].comm_parity);
+
+ switch (pari) {
+ case C_PR_NONE:
+ par = 'n';
+ break;
+ case C_PR_ODD:
+ par = 'o';
+ break;
+ case C_PR_EVEN:
+ par = 'e';
+ break;
+ default:
+ par = 'n';
+ break;
+ }
+
+ if ( data_len & C_DL_2STOP) {
+ nstop = 2;
+ } else {
+ nstop = 1;
+ }
+
+ switch (data_len & 0x0f) {
+ case 1:
+ char_len = 5;
+ break;
+ case 2:
+ char_len = 6;
+ break;
+ case 4:
+ char_len = 7;
+ break;
+ case 8:
+ char_len = 8;
+ break;
+ default:
+ char_len = 8;
+ break;
+ }
+
+ len += sprintf(buf+len, "%s:%d%c%d\n", cysys_charlen,
+ char_len, par, nstop);
+ } else {
+ int nstop;
+ char par;
+
+ switch ( info->cor1 & 0xc0) {
+ case CyPARITY_NONE:
+ par = 'n';
+ break;
+ case CyPARITY_O:
+ par = 'o';
+ break;
+ case CyPARITY_E:
+ par = 'e';
+ break;
+ default:
+ par = 'n';
+ break;
+ }
+
+ if ( info->cor1 & Cy_2_STOP) {
+ nstop = 2;
+ } else {
+ nstop = 1;
+ }
+
+ len += sprintf(buf+len, "%s:%d%c%d\n", cysys_charlen,
+ (info->cor1 & 0x03) + 5, par, nstop);
+ }
+ return len;
+ }
+
MODULE_LICENSE("GPL");
--- a/include/linux/cyclades.h 2004-08-20 11:19:26.000000000 -0300
+++ b/include/linux/cyclades.h 2004-09-02 17:18:41.000000000 -0300
@@ -1,4 +1,4 @@
-/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
+/* $Revision: 1.5 $$Date: 2004/09/02 20:18:41 $
* linux/include/linux/cyclades.h
*
* This file was initially written by
@@ -7,6 +7,21 @@
*
* This file contains the general definitions for the cyclades.c driver
*$Log: cyclades.h,v $
+ *Revision 1.5 2004/09/02 20:18:41 germano
+ *Changed CyMonitor and drivers to export the atributes names under /sys as cycser[0-255]. Corrected installation scripts to run propertly under 2.6 kernel.
+ *
+ *Revision 1.4 2004/09/02 13:10:51 germano
+ *gave a more correct name to the function that exports information under /sys/device
+ *
+ *Revision 1.3 2004/09/01 21:38:23 germano
+ *old procfs code ported to new sysfs
+ *
+ *Revision 1.2 2004/08/30 18:46:06 germano
+ *new try to implement sysfs for async
+ *
+ *Revision 1.1 2004/08/20 20:13:19 germano
+ *started sysfs support coding
+ *
*Revision 3.1 2002/01/29 11:36:16 henrique
*added throttle field on struct cyclades_port to indicate whether the
*port is throttled or not
@@ -401,6 +416,43 @@
#define C_CM_FATAL 0x91 /* fatal error */
#define C_CM_HW_RESET 0x92 /* reset board */
+
+//strings
+char cysys_state[] = "State ";
+char cysys_open[] = "Open";
+char cysys_close[] = "Close";
+
+char cysys_ct[] = "Card Type ";
+char cysys_z[] = "Cyclades Z";
+char cysys_y[] = "Cyclades Y";
+
+char cysys_baud[] = "Baud Rate ";
+
+char cysys_fc[] = "Flow Control ";
+char cysys_fc_soft[] = "software";
+char cysys_fc_hard[] = "hardware";
+char cysys_fc_none[] = "none";
+
+char cysys_rxfcs[] = "RX Flow Control Status";
+char cysys_txfcs[] = "TX Flow Control Status";
+
+char cysys_on[] = "on";
+char cysys_off[] = "off";
+
+char cysys_dcd[] = "DCD ";
+char cysys_dsr[] = "DSR ";
+char cysys_cts[] = "CTS ";
+char cysys_rts[] = "RTS ";
+char cysys_dtr[] = "DTR ";
+
+char cysys_ttyrxbuf[] = "TTY Rx Buffer ";
+char cysys_ttytxbuf[] = "TTY Tx Buffer ";
+
+char cysys_boardrxbuf[] = "On Board Rx Buffer ";
+char cysys_boardtxbuf[] = "On Board Tx Buffer ";
+
+char cysys_charlen[] = "Character Len ";
+
/*
* CH_CTRL - This per port structure contains all parameters
* that control an specific port. It can be seen as the
@@ -823,5 +875,267 @@
/***************************************************************************/
+
+
+/*used for sysfs register purposes */
+static ssize_t show_sys_data(struct device *p, char *buf);
+
+struct device_attribute _cydas[]={\
+__ATTR(cycser0, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser1, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser2, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser3, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser4, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser5, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser6, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser7, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser8, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser9, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser10, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser11, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser12, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser13, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser14, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser15, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser16, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser17, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser18, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser19, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser20, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser21, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser22, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser23, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser24, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser25, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser26, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser27, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser28, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser29, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser30, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser31, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser32, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser33, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser34, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser35, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser36, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser37, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser38, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser39, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser40, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser41, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser42, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser43, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser44, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser45, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser46, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser47, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser48, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser49, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser50, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser51, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser52, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser53, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser54, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser55, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser56, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser57, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser58, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser59, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser60, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser61, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser62, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser63, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser64, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser65, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser66, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser67, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser68, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser69, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser70, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser71, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser72, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser73, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser74, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser75, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser76, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser77, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser78, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser79, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser80, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser81, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser82, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser83, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser84, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser85, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser86, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser87, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser88, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser89, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser90, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser91, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser92, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser93, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser94, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser95, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser96, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser97, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser98, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser99, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser100, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser101, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser102, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser103, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser104, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser105, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser106, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser107, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser108, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser109, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser110, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser111, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser112, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser113, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser114, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser115, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser116, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser117, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser118, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser119, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser120, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser121, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser122, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser123, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser124, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser125, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser126, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser127, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser128, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser129, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser130, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser131, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser132, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser133, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser134, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser135, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser136, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser137, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser138, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser139, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser140, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser141, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser142, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser143, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser144, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser145, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser146, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser147, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser148, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser149, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser150, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser151, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser152, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser153, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser154, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser155, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser156, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser157, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser158, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser159, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser160, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser161, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser162, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser163, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser164, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser165, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser166, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser167, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser168, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser169, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser170, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser171, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser172, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser173, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser174, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser175, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser176, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser177, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser178, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser179, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser180, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser181, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser182, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser183, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser184, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser185, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser186, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser187, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser188, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser189, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser190, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser191, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser192, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser193, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser194, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser195, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser196, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser197, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser198, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser199, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser200, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser201, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser202, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser203, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser204, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser205, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser206, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser207, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser208, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser209, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser210, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser211, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser212, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser213, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser214, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser215, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser216, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser217, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser218, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser219, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser220, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser221, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser222, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser223, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser224, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser225, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser226, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser227, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser228, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser229, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser230, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser231, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser232, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser233, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser234, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser235, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser236, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser237, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser238, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser239, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser240, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser241, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser242, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser243, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser244, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser245, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser246, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser247, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser248, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser249, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser250, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser251, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser252, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser253, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser254, S_IRUGO, show_sys_data, NULL),
+__ATTR(cycser255, S_IRUGO, show_sys_data, NULL)};
#endif /* __KERNEL__ */
#endif /* _LINUX_CYCLADES_H */