3ware 9500 ("3w-9xxx") w/ dual Opteron (Tyan 2885)

[Ed Hill]

Hi folks,

Has anyone managed to get a 3ware 9500-series RAID controller working
stably on an SMP Opteron system?  Especially with a Tyan 2885 MB?  If
so, would you be willing to share your kernel configuration info?

I'm trying to get a 3ware 9500 8-port card working on a Tyan 2885
motherboard (dual Opterons) and have been experiencing numerous oopses:

  - 2.6.[78] w/ the included 3w-9xxx driver and ext3 FS:
    Results in kernel oops after 1--2 hours of writing to the 
    RAID array (happened four times).  The oops appears to be 
    in ext3.

  - 2.6.8.1 w/ latest 3w-9xxx driver from 3ware and XFS FS:
    Results in "Bad page state at prep_new_page" kernel errors

When not using the 3ware RAID array (that is, the array is mounted but
no reads or writes are done to it), the machine is very stable--even
under heavy CPU loads and lots of IO to local (non-RAID) IDE drives.

Any help/suggestions appreciated!

Ed

-- 
Edward H. Hill III, PhD
office:  MIT Dept. of EAPS;  Rm 54-1424;  77 Massachusetts Ave.
             Cambridge, MA 02139-4307
emails:  eh3@xxxxxxx                ed@xxxxxxx
URLs:    http://web.mit.edu/eh3/    http://eh3.com/
phone:   617-253-0098
fax:     617-253-4464

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/